Objectif
The main emphasis has been the search for new high critical temperature superconducting oxides. Efforts have been focused essentially on both fluorination and oxidation by an electrochemical method of oxide deriving from lanthanum 2 copper oxide 4. It has been shown that at low temperature (less than 200 C for the fluorination process and room temperature for the electrochemical process) oxides can be made into superconductors by inserting either fluorine or oxygen atoms into the lattice of the oxides. Interesting structural transitions have been studied. Using a chlorination treatment of lanthanum 2 copper oxide 4 at low temperature it has been shown that there is an oxidation of the oxide similar to results obtained by treating the material under high oxygen pressure. A phase diagram for a superoxygenated system, such as lanthanum 2 copper oxide (4+delta), shows clearly the occurrence of 2 different orthorhombic phases. The influence of fluorination on thermal conductivity, X-ray diffraction, specific heat, magnetic susceptibility, electrical resistivity and thermoelectric power has been investigated.
Studies have been made on the effect of oxygen nonstoichiometry upon superconductivity in bismuth cuprate and lead cuprate using X-ray diffraction techniques and high resolution electron microscopy (HREM) for understanding the structures and magnetic and electrical measurements for physical characterization. A series of new superconductors of formulation lead(1-x) A(x) strontium 2 (calcium(1-y) yttrium(y)) copper 2 oxygen (7-delta) were isolated for A equal to copper magnesium, zinc, scandium, cadmium and indium with critical temperatures ranging from 35 K to 70 K. The microstructure of the different samples was studied and several kinds of extended defects were found.
This research has involved gas solid reactions of high critical temperature superconductors, particularly of the bismuth family, preparations of thin films of superconductors by several methods including laser ablation deposition (LAD) and the analysis of transport properties especially the Hall effect. The process of making thin films of reproducible quality by laser ablation has been mastered. Efforts are being made to manufacture thin film devices from yttrium barium 2 copper 3 oxygen 7 and bismuth 2 strontium 2 calcium(n-1) copper n (n = 2, 3) systems. An instrument has been developed to analyze gas solid reactions.
This research was firstly to obtain good ceramics of yttrium barium 2 copper 3 oxygen(7-y) with a favourable microstructure for obtaining high critical densities, secondly to study the effect of iron doping on the high temperature susceptibility of yttrium barium 2 copper 3 oxygen(7-y) and thirdly to propose a novel method of processing melt cast bismuth strontium calcium copper oxide (BSCCO) rods. In the latter case, for bismuth based compounds, bulk samples were prepared as rods by a melt casting process. The application of an electric field to the rods under certain conditions produced a well defined hot zone which travelled along the rod from the positive to the negative electrode. This is a possible alternative processing route for producing BSCCO materials.
Research on new superconducting materials will be guided by the essential structural and chemical features that have emerged from study of the well-known high temperature superconductors
(La, Sr)2CuO 4-delta and YBA2Cu3O7-delta. Namely an anisotropic structure with low dimensional elements (Cu-O planes), a transition element which is formally in a mixed valence state, one configuration having S as 1/2 (Cu 2+), and proximity to an antiferromagnetic ground state or a metal-insulator transition.
Preliminary characterization of new materials will involve chemical studies using the scanning electron microprobe and Auger microscopy, structural studies by X-ray diffraction and search for signs of superconductivity by susceptibility and magnetization measurements. As new phases are isolated, their structure and physical properties will be more fully characterized.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles sciences chimiques chimie inorganique métal de transition
- sciences naturelles sciences chimiques chimie inorganique métal alcalinoterreux
- sciences naturelles sciences physiques optique microscopie electron microscopy
- sciences naturelles sciences chimiques chimie inorganique métal pauvre
- sciences naturelles sciences physiques électromagnétisme et électronique superconducteur
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Données non disponibles
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
33405 TALENCE
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.