Obiettivo
The main emphasis has been the search for new high critical temperature superconducting oxides. Efforts have been focused essentially on both fluorination and oxidation by an electrochemical method of oxide deriving from lanthanum 2 copper oxide 4. It has been shown that at low temperature (less than 200 C for the fluorination process and room temperature for the electrochemical process) oxides can be made into superconductors by inserting either fluorine or oxygen atoms into the lattice of the oxides. Interesting structural transitions have been studied. Using a chlorination treatment of lanthanum 2 copper oxide 4 at low temperature it has been shown that there is an oxidation of the oxide similar to results obtained by treating the material under high oxygen pressure. A phase diagram for a superoxygenated system, such as lanthanum 2 copper oxide (4+delta), shows clearly the occurrence of 2 different orthorhombic phases. The influence of fluorination on thermal conductivity, X-ray diffraction, specific heat, magnetic susceptibility, electrical resistivity and thermoelectric power has been investigated.
Studies have been made on the effect of oxygen nonstoichiometry upon superconductivity in bismuth cuprate and lead cuprate using X-ray diffraction techniques and high resolution electron microscopy (HREM) for understanding the structures and magnetic and electrical measurements for physical characterization. A series of new superconductors of formulation lead(1-x) A(x) strontium 2 (calcium(1-y) yttrium(y)) copper 2 oxygen (7-delta) were isolated for A equal to copper magnesium, zinc, scandium, cadmium and indium with critical temperatures ranging from 35 K to 70 K. The microstructure of the different samples was studied and several kinds of extended defects were found.
This research has involved gas solid reactions of high critical temperature superconductors, particularly of the bismuth family, preparations of thin films of superconductors by several methods including laser ablation deposition (LAD) and the analysis of transport properties especially the Hall effect. The process of making thin films of reproducible quality by laser ablation has been mastered. Efforts are being made to manufacture thin film devices from yttrium barium 2 copper 3 oxygen 7 and bismuth 2 strontium 2 calcium(n-1) copper n (n = 2, 3) systems. An instrument has been developed to analyze gas solid reactions.
This research was firstly to obtain good ceramics of yttrium barium 2 copper 3 oxygen(7-y) with a favourable microstructure for obtaining high critical densities, secondly to study the effect of iron doping on the high temperature susceptibility of yttrium barium 2 copper 3 oxygen(7-y) and thirdly to propose a novel method of processing melt cast bismuth strontium calcium copper oxide (BSCCO) rods. In the latter case, for bismuth based compounds, bulk samples were prepared as rods by a melt casting process. The application of an electric field to the rods under certain conditions produced a well defined hot zone which travelled along the rod from the positive to the negative electrode. This is a possible alternative processing route for producing BSCCO materials.
Research on new superconducting materials will be guided by the essential structural and chemical features that have emerged from study of the well-known high temperature superconductors
(La, Sr)2CuO 4-delta and YBA2Cu3O7-delta. Namely an anisotropic structure with low dimensional elements (Cu-O planes), a transition element which is formally in a mixed valence state, one configuration having S as 1/2 (Cu 2+), and proximity to an antiferromagnetic ground state or a metal-insulator transition.
Preliminary characterization of new materials will involve chemical studies using the scanning electron microprobe and Auger microscopy, structural studies by X-ray diffraction and search for signs of superconductivity by susceptibility and magnetization measurements. As new phases are isolated, their structure and physical properties will be more fully characterized.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali scienze chimiche chimica inorganica metalli di transizione
- scienze naturali scienze chimiche chimica inorganica metalli alcalino terrosi
- scienze naturali scienze fisiche ottica microscopia electron microscopy
- scienze naturali scienze chimiche chimica inorganica metalli di post-transizione
- scienze naturali scienze fisiche elettromagnetismo ed elettronica superconduttività
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
33405 TALENCE
Francia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.