Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-06-10

Improvement of Interlaboratory Reproducibility for NOx and CO Measurements

Objectif

The aim of the research is to define precise measurement techniques for the determination of CO and NOx emissions from appliances burning fossil fuels and to improve the reproducibility of test results among European laboratories, which shall not exceed 15 % relative. (Actual reproducibility lies respectively about 40 % and 25 % for NOx and CO measurement). The research shall improve the CEN technical report CR 1404, which will be amended where needed, in particular to extend its scope to oil fixed appliances.
Measurement and calculation have been carried out to check the influence of the gas composition as well as the nitrogen content in fuel oil: The first results obtained indicate that qualitatively there is a good coincidence between the experimental figures and the model used for the calculation. It is now possible to predict the influence on emissions of gas or fuel oil composition and the corresponding correction formulas have been developed. Sampling has also been fully examined and figures are available on various influences such as sampling point in appliance in chimneys, material used etc. A protocol to measure the sampling line influence has been developed.

Experimental protocols to evaluate the errors due to the analyzers (CO, NOx) have been developed and practical tests have been carried out indicating the range of errors possible in a real situation. Calibration gas bottles from different suppliers are presently tested. Possible drift with time is being checked. This part is not yet finalized. Finally the analysis of the influence of repeatability has led to identification of new error sources.
A GLP document has been written and made available for an intercomparison presently on-going with three different samples (boilers). The GLP document includes details on how to check the measurement instruments and sampling line, the procedures for calibration and testing as well as the detailed method for the uncertainty calculation.

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

Données non disponibles

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

CSC - Cost-sharing contracts

Coordinateur

DANISH GAS TECHNOLOGY CENTRE A/S
Contribution de l’UE
Aucune donnée
Adresse
5A,Dr. Neergaardsvej 5A Naturgassens Hus
2970 HOERSHOLM
Danemark

Voir sur la carte

Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée

Participants (13)

Mon livret 0 0