Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-06-10

Improvement of Interlaboratory Reproducibility for NOx and CO Measurements

Obiettivo

The aim of the research is to define precise measurement techniques for the determination of CO and NOx emissions from appliances burning fossil fuels and to improve the reproducibility of test results among European laboratories, which shall not exceed 15 % relative. (Actual reproducibility lies respectively about 40 % and 25 % for NOx and CO measurement). The research shall improve the CEN technical report CR 1404, which will be amended where needed, in particular to extend its scope to oil fixed appliances.
Measurement and calculation have been carried out to check the influence of the gas composition as well as the nitrogen content in fuel oil: The first results obtained indicate that qualitatively there is a good coincidence between the experimental figures and the model used for the calculation. It is now possible to predict the influence on emissions of gas or fuel oil composition and the corresponding correction formulas have been developed. Sampling has also been fully examined and figures are available on various influences such as sampling point in appliance in chimneys, material used etc. A protocol to measure the sampling line influence has been developed.

Experimental protocols to evaluate the errors due to the analyzers (CO, NOx) have been developed and practical tests have been carried out indicating the range of errors possible in a real situation. Calibration gas bottles from different suppliers are presently tested. Possible drift with time is being checked. This part is not yet finalized. Finally the analysis of the influence of repeatability has led to identification of new error sources.
A GLP document has been written and made available for an intercomparison presently on-going with three different samples (boilers). The GLP document includes details on how to check the measurement instruments and sampling line, the procedures for calibration and testing as well as the detailed method for the uncertainty calculation.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

Dati non disponibili

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

CSC - Cost-sharing contracts

Coordinatore

DANISH GAS TECHNOLOGY CENTRE A/S
Contributo UE
Nessun dato
Indirizzo
5A,Dr. Neergaardsvej 5A Naturgassens Hus
2970 HOERSHOLM
Danimarca

Mostra sulla mappa

Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato

Partecipanti (13)

Il mio fascicolo 0 0