Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2022-12-27

WIND FARM LUESSOW

Objetivo

This project shall be used for electric power generation by wind. For this purpose 10 wind power plants, type "ENERCON E40" will be installed in "Wind farm Luessow".
The generated electric power is to be fed into the supply grid of the Energy Supply Company HEVAG Rostock. It is envisaged to produce 11,500 MWh electric energy a year by the mentioned wind farm. It shall be evidenced by this that electric power can be profitably generated from regenerative inland energy sources, too.
The new gearless wind power plant ENERCON E40 has been developed, in order to increase the efficiency of such plants. At present only 2 prototypes are existing which are subject to permanent improvement.
The a.m. type represents a new generation of wind power plants. It is the first gearless wind power plant. The project "Wind farm Luessow" shall contribute to the promotion of this new and economically working plant and to the production stage as well.
Thus this project can be considered to be innovative.
The wind farm was inaugured on 19.04.1995. During the first two years of operation, the reliability was permanently increased, by continuous software development and data adjustment. The average availability during the period was 97%.
The wind power plant manufacturer ENERCON situated in Aurich, Germany together with Windenergienutzungs GmbH with its registered office in Altenpleen, Germany have prepared the "Wind farm Luessow" project.
Luessow is a little village located in the South-West of Stralsund in Mecklenburg Pomerania.
On the top of Luessower Berg (that is a flat hill in this region) the wind farm shall be erected. It is designed in three rows with a distance of 200 m and more between the several plants, in order to avoid mutual shading and restriction of performance.
The wind expertise has shown an average annual wind velocity of 4.2 m/sec at 10 m above ground and 5.4 m/sec at 30 m above ground. These data make evident that an appropriate site has been chosen for electric wind power generation. While a relatively free advance to the wind farm us provided in the west sector (that is the main wind direction), there are some obstructions in free advance to the plant it is necessary to install the hub ashigh as possible.
Beside several other improvements of the wind power plant ENERCON has increased the tower's height. Now a tower of 48 m height is available. Considering the surrounding roughness which the wind farm is subject to this tower could considerably increase the power output, compared with the original 40...42 m tower.
It is intended by us to use this new higher tower, in order to improve the performance of the wind farm.
The 20 kV medium voltage mains installed in this region is not able to take the 500 kV nominal output of the wind farm. That's why we were obliged by the Energy Supply Company HEVAG to build a separate line from the wind farm Luessow to the Knieper transformation station. The distance is abt. 4 km.
The wind power plant ENERCON E40 is a new development representing the first large gearless wind power plant in the world which is equipped with a directly driven controlled DC generator (annular construction) with subsequent 12 pulse inverter and harmonicsfilter for adaptation to the supply grid of the Energy Supply Company.
Due to the missing gear frictional loss and noise emission can be reduced. Furthermore, it is possible to shorten the maintenance expenditure for the plant and to increase the efficiency, but the costs will be comparatively similar to those for conventional wind power plants.
The operation results of wind farm Luessow shall be used for further distribution of information about the performance of this new type of wind power plants (trade journals, EC etc.).

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Datos no disponibles

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

Datos no disponibles

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

DEM - Demonstration contracts

Coordinador

ENERCON GMBH & CO
Aportación de la UE
Sin datos
Dirección
DREEKAMP 5
26605 AURICH
Alemania

Ver en el mapa

Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos
Mi folleto 0 0