Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2022-12-27

WIND ENERGY FARM 1 MW TARIFA

Objetivo

Demonstration of the viability of three 300 KW vertical axis wind turbines in a 1 MW windfarm in Spain and comparing different versions of the vertical axis machines. Innovation is in the fully automatic control system, the two speed generator and the GRP blades for the third machine.

The wind farm will be installed in Tarifa and will form a demonstration project composed of 3 vertical axis wind turbines of the type CENEMESA-19, 300 KW each, to be built in Spain, at the CORDOBA factory of CENEMESA. Two of the machines will be standard units and the third one with improvements and innovations such as a fully automatic control system, two speed generator and GRP blades also built in Spain. The three machines will be installed 60 m from each other and interconnected through a main switchboard to a 1 000 KVA transformer 380/15 KV main substation. The 2 bladed wind turbine has a 19 m diameter rotor, total height 25 m and is mounted on a 4.5 m base, with an overall turbine height of 31 m. The blades are made of aluminium. Main improvements of the demo machine:
1) three independent braking systems, one on the low-speed shaft, one fail-safe and one on the high-speed shaft;
2) fully automatic operation using new type of sophisticated controller;
3) special joint betweenthe aluminium blade and the tower. The demo machine will have GRP blades instead of aluminium ones. The 300 KW induction generator is placed vertically, in parallel to the drive shaft and is connected through a soft coupling to the gearbox which is placed on the ground.
During the demonstration phase, comparison with the standard machines will show the degree of success of the project. The estimated annual yield is about 600 MWh and the payback time about 9 years.

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Datos no disponibles

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

Datos no disponibles

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

DEM - Demonstration contracts

Coordinador

CONSTRUCTORA NACIONAL DE MAQUINARIA ELECTRICA SA
Aportación de la UE
Sin datos
Dirección
VICTOR HUGO 4
28004 Madrid
España

Ver en el mapa

Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos
Mi folleto 0 0