Skip to main content
European Commission logo print header

Remote Laser Welding System Navigator for Eco & Resilient Automotive Factories

Project description


Digital factories: Manufacturing design and product lifecycle management

RLW Navigator aims to develop an innovative Process Navigator to configure, integrate, test and validate applications of Remote Laser Welding (RLW) in automotive assembly addressing today's critical needs for frequently changing operating conditions and product-mix provisions. Thus, RLW Navigator will crucially serve as an enabler for future energy efficient smart factories. RLW is emerging as a promising joining technology for sheet metal assembly due to benefits on several fronts including reduced processing time, (50-75%) and decreased factory floor footprint (50%), reduced environmental impact through energy use reduction (60%), and providing a flexible process base for future model introduction or product change. Currently, RLW systems are limited in their applicability due to an acute lack of systematic ICT-based simulation methodologies to navigate their efficient application in automotive manufacturing processes. The project aims to address this by developing a Process Navigator simulation system that will deal with three key challenges thereby allowing manufacturers to utilize the advantages of the RLW system.Firstly the most critical obstacle that currently prevents the successful implementation of RLW is the need for tight dimensional control of part-to-part gap during joining operations, essential to ensure the quality of the stitch.Secondly the existing assembly system architecture must be reconfigured to provide the opportunity to evaluate the RLW system in terms of its feasibility to perform all required assembly tasks. This will provide crucial information about the most advantageous workstation/cell reconfiguration, which will serve as the basis for optimal robot path planning to reduce joining process time and workstation level efficiency assessment.Finally the project will develop systematic evaluation and learning methods to assess and improve the overall performance, cost-effectiveness and eco-efficiency of the RLW system.

Call for proposal

FP7-2011-NMP-ICT-FoF
See other projects for this call

Coordinator Contact

Darek CEGLAREK Prof

Coordinator

THE UNIVERSITY OF WARWICK
EU contribution
€ 1 092 020,00
Address
Kirby Corner Road - University House
CV4 8UW Coventry
United Kingdom

See on map

Region
West Midlands (England) West Midlands Coventry
Activity type
Higher or Secondary Education Establishments
Administrative Contact
Peter Hedges (Dr.)
Links
Total cost
No data

Participants (13)