Obiettivo New cleaning process of exhaust air from a resin coating aluminium sheet plant. 95 % of such units are usually not treated. Complement is usually cleaned by absorption over coal. Proposed process includes solvent absorption in a liquid with liquid regeneration. Then solvent distillation coupled with a pervaporation step (distill. study by IFP, pervap. unit with selected membrane furnished by GFT) dist. alone cannot be used due to azeotropes, pervap. is used too pass over them. The unit will recover 800 T of solvents of various grades.The new process uses organic washing with oil and using a pervaporation (*1) separation process. The process requires 60% less energy than traditional methods using active carbon regenerated with water vapour. In principle the process is one of solvent absorption by an organic liquid chosen for its low volatility and inert nature towards the solvent it absorbs.The absorbates are subsequently recovered by way of distillation and pressure release. The resultant mixture of solvents is dehydrated and distilled thereby producing the required distillates.The installation can be divided into 3 main sections:1. Pre- and post-treatment of air and condesates.2. Absorption/desorption of solvents3. Dehydration/distillation.Taking into account the presence of water-alcohol-methylethyl-ketone and acetate in the azeotropic solvent, pervaporation is used to remove the azetropes from this and extract the successive distillation products; an energy intensive process. Programma(i) ENG-ENDEMO C - Programme (EEC) of demonstration projects and industrial pilot projects (EEC) in the energy field, 1985-1989 Argomento(i) 3.4 - INDUSTRY Invito a presentare proposte Data not available Meccanismo di finanziamento DEM - Demonstration contracts Coordinatore BEFS TECHNOLOGIES Contributo UE Nessun dato Indirizzo DIVISION ASOLVAIR RUE DE LA REPUBLIQUE 59 93104 MONTREUIL S/BOIS Francia Mostra sulla mappa Costo totale Nessun dato