Reinforcing the scientific excellence and innovation capacity in logistics technologies of the University of Miskolc

Korszerű logisztikai tantárgy MOOC rendszerben történt megvalósításának bemutatása

Author(s): Illés Béla, Skapinyecz Róbert, Tamás Péter
Published in: The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference, Issue No. 30., 2016.04.21.-2016.04.22., 2016, ISBN 978-963-358-113-1
Publisher: University of Miskolc

Design problems of conveyors

Author(s): Péter Telek
Published in: The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference, Issue No. 30., 2016.04.21.-2016.04.22., 2016, ISBN 978-963-358-113-1
Publisher: University of Miskolc

Logisztikai trendek, UMi-TWINN projekt

Author(s): Illés Béla
Published in: The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference, Issue No. 30., 2016.04.21.-2016.04.22., 2016, ISBN 978-963-358-113-1
Publisher: University of Miskolc

Észak-Magyarországi virtuális logisztikai központ koncepciója

Author(s): Tamás Péter, Illés Béla
Published in: The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference, Issue No. 30., 2016.04.21.-2016.04.22., 2016, ISBN 978-963-358-113-1
Publisher: University of Miskolc

Igényváltozások, időhorizontok és a készletszint közötti összefüggés

Author(s): Korponai János, Bányainé Tóth Ágota, Illés Béla
Published in: The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference, Issue No. 30., 2016.04.21.-2016.04.22., 2016, ISBN 978-963-358-113-1
Publisher: University of Miskolc

Results of the UMI-TWINN Project During Months 1-15

Author(s): Béla Illés, Péter Telek
Published in: MultiScience - XXXI. microCAD International Multidisciplinary Scientific Conference, 2017, Page(s) 6 p.
Publisher: University of Miskolc

Wearable solutions for efficient manual logistics processes - RFID Wristband and Smart-Glasses

Author(s): Olaf, Poenicke ; Martin, Kirch ; Klaus, Richter ; Falko, Schmid ; Péter, Telek
Published in: 4th International Physical Internet Conference, 2017, Page(s) pp. 171-180. , 10 p.
Publisher: Medienfabrik Graz

A new network concept for Logistic Centres in Hungary – regional segmentation in line with the PI vision

Author(s): Florian, Ehrentraut ; Christian, Landschützer ; Péter, Telek ; Tamás, Bányai
Published in: Proceedings of the 5th International Physical Internet Conference, 2018, Page(s) pp. 129-141.
Publisher: University of Groningen

Telematikai alapú logisztikai megoldások az igényvezérelt helyközi közlekedési szolgáltatásokban Magyarországon

Author(s): Sárközi György, Illés Béla, Wagner György
Published in: MultiScience - XXXI. microCAD International Multidisciplinary Scientific Conference, Issue 20-21 April 2017, 2017, Page(s) Section C1, 2. paper, 6 p., ISBN 978-963-358-132-2
Publisher: University of Miskolc

Raktári anyagmozgatási stratégia optimális kialakításának döntési módszere termelő vállalatoknál

Author(s): Dobos Péter, Dr. Tamás Péter, Dr. Illés Béla
Published in: 3rd FORUM OF APPLIED SCIENCES, Issue 2016 March 10-11., 2017, Page(s) 169-178, ISBN 978-963-7159-23-7
Publisher: Budapest Business School, University of Applied Sciences

A folyamatmodellezés jövője a logisztikában

Author(s): Skapinyecz Róbert, Illés Béla, Tamás Péter, Lajos Sándor, Szentesi Szabolcs
Published in: 3rd FORUM OF APPLIED SCIENCES, Issue 2016 March 10-11, 2017, Page(s) 760-782, ISBN 978-963-7159-23-7
Publisher: Budapest Business School, University of Applied Sciences

A folyamatfejlesztés módszerei szakaszos gyártási rendszereknél

Author(s): Szentesi Szabolcs, Illés Béla, Tamás Péter
Published in: 3rd FORUM OF APPLIED SCIENCES, Issue 2016 March 10-11., 2017, Page(s) 804-813, ISBN 978-963-7159-23-7
Publisher: Budapest Business School, University of Applied Sciences

Járattervezés előre nem definiált objektumok között

Author(s): Veres Péter, Bányai tamás, Illés Béla
Published in: 3rd FORUM OF APPLIED SCIENCES, Issue 2016 March 10-11, 2017, Page(s) 880-890, ISBN 978-963-7159-23-7
Publisher: Budapest Business School, University of Applied Sciences

Intelligent Transportation Systems to Support Production Logistics

Author(s): Péter Veres, Tamás Bányai, Béla Illés
Published in: Lecture Notes in Mechanical Engineering/Vehicle and Automotive Engineering, 2017, Page(s) 245-256
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-51189-4_24

The Context Between the Shift of Average Demand and the Safety Stock of Purchased Parts

Author(s): János Korponai, Ágota Bányainé Tóth, Béla Illés
Published in: Lecture Notes in Mechanical Engineering/Vehicle and Automotive Engineering, 2017, Page(s) 275-285
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-51189-4_26

Description of a Method for the Handling of Customer Needs in Logistics

Author(s): Béla Illés, Róbert Skapinyecz, György Wagner
Published in: Lecture Notes in Mechanical Engineering/Vehicle and Automotive Engineering, 2017, Page(s) 341-354
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-51189-4_31

Optimal Formation of Logistics Networks

Author(s): György Kovács, Zoltán Varga, Márk Mihalik
Published in: Lecture Notes in Mechanical Engineering/Vehicle and Automotive Engineering, 2017, Page(s) 391-403
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-51189-4_35

Raktárbővítési lehetőség kiválasztásának módszere

Author(s): Dr. Tamás Péter, Dr. Illés Béla, Fekete Dávid
Published in: FMTÜ: Fiatal Műszakiak Tudományos Ülésszaka, 2013, Page(s) pp. 407-411
Publisher: Erdélyi Múzeum-Egyesület

Mutatószámok vizsgálata a vállalati logisztikai rendszerben

Author(s): Korponai János, Bányainé Tóth Ágota, Illés Béla
Published in: The Publications of the MultiScience - XXIX. microCAD International Multidisciplinary Scientific Conference, 2015
Publisher: University of Miskolc

Vállalatok közötti stratégiai együttműködés

Author(s): Korponai János, Bányainé Tóth Ágota, Illés Béla
Published in: Műszaki Tudomány az Észak-Kelet Magyarországi Régióban, 2015, Page(s) pp. 127-134
Publisher: Debreceni Akadémiai Bizottság Műszaki Szakbizottsága

The sensibility inspection of supply chains based on logistics aspects

Author(s): Beáta Borodavko, Béla Illés, Ágota Bányai
Published in: The Publications of the MultiScience - XXIX. microCAD International Multidisciplinary Scientific Conference, 2015
Publisher: University of Miskolc

Design of networking service systems

Author(s): Péter Veres, Tamás Bányai, Béla Illés
Published in: The Publications of the MultiScience - XXIX. microCAD International Multidisciplinary Scientific Conference, 2015
Publisher: University of Miskolc

The function of the replenishment time in the purchasing.

Author(s): János Korponai, Ágota Bányainé Tóth, Béla Illés
Published in: Proceedings of the 3rd International Scientific Conference on Advances in Mechanical Engineering (ISCAME 2015), 2015, Page(s) pp. 90-95
Publisher: University of Debrecen

Application of simulation modeling for formation of pull-principled production control system

Author(s): Péter Tamás
Published in: Journal of Production Engineering, Issue Vol. 19., No. 1., 2016, 2016, Page(s) 99-102, ISSN 1821-4932
Publisher: University of Novi Sad

Raktár-irányítási rendszerek hatékonyságnövelési lehetőségeinek vizsgálata / Examination of Efficiency Improvement Possibilities for Warehouse Management Systems

Author(s): Péter Tamás, Béla Illés
Published in: Műszaki szemle, Issue No. 68 (2016), 2016, Page(s) pp. 29-36., ISSN 1454-0746
Publisher: Erdélyi Magyar Műszaki Tudományos Társaság – EMT / Hungarian Technical Scientific Society

New Challenges for Quality Assurance of Manufacturing Processes in Industry 4.0

Author(s): Béla Illés, Péter Tamás, Péter Dobos, Róbert Skapinyecz
Published in: Solid State Phenomena, Issue 261, 2017, Page(s) 481-486, ISSN 1662-9779
Publisher: Scientific.net
DOI: 10.4028/www.scientific.net/ssp.261.481

Gyártási folyamatok minőségbiztosításának kihívásai a 4. Ipari forradalomban

Author(s): Tamás Péter, Illés Béla, Dobos Péter, Skapinyecz Róbert
Published in: LOGISZTIKA - INFORMATIKA - MENEDZSMENT, Issue 2 : 1 (2017), 2017, Page(s) pp. 21-31. , 10 p., ISSN 2498-9037
Publisher: Budapest Business School

Logistic aspects of Industry 4.0

Author(s): R Skapinyecz, B Illés, Á Bányai
Published in: IOP Conference Series: Materials Science and Engineering, Issue 448, 2018, Page(s) 012014, ISSN 1757-899X
Publisher: IOP Publishing Ltd
DOI: 10.1088/1757-899x/448/1/012014

Risk management in logistics networks: an overview of the field and some novel perspectives

Author(s): Róbert, Skapinyecz ; Béla, Illés
Published in: ADVANCED LOGISTIC SYSTEMS: THEORY AND PRACTICE, Issue 11 : 1 (2018), 2018, Page(s) pp. 41-52. , 12 p., ISSN 1789-2198
Publisher: University of Miskolc

Effects of Logistic Processes to the Maintenance Time

Author(s): Péter Telek
Published in: Research Papers Faculty of Materials Science and Technology Slovak University of Technology, Issue 26/42, 2018, Page(s) 135-143, ISSN 1338-0532
Publisher: Slovak University of Technology in Bratislava
DOI: 10.2478/rput-2018-0016

Process-based planning of material handling in manufacturing systems

Author(s): Péter Telek
Published in: IOP Conference Series: Materials Science and Engineering, Issue 448, 2018, Page(s) 012018, ISSN 1757-899X
Publisher: IOP Publishing Ltd
DOI: 10.1088/1757-899x/448/1/012018

Complexity Analysis of Material Handling Design Processes

Author(s): Péter, Telek ; Christian, Landschützer
Published in: ADVANCED LOGISTIC SYSTEMS: THEORY AND PRACTICE, Issue 11 : 1 (2017), 2017, Page(s) pp. 61-76. , 16 p., ISSN 1789-2198
Publisher: University of Miskolc

Optimization of In-Plant Production Supply with Black Hole Algorithm

Author(s): Péter Veres, Tamás Bányai, Béla Illés
Published in: Solid State Phenomena, Issue 261, 2017, Page(s) 503-508, ISSN 1662-9779
Publisher: Scientific.net
DOI: 10.4028/www.scientific.net/ssp.261.503

Optimisation problems of networking manufacturing processes

Author(s): Péter Veres, Tamás Bányai, Béla Illés
Published in: MATEC Web of Conferences, Issue 112, 2017, Page(s) 06026, ISSN 2261-236X
Publisher: EDP Sciences
DOI: 10.1051/matecconf/201711206026

TOYOTA PRODUCTION SYSTEM IN MILKRUN BASED IN-PLANT SUPPLY

Author(s): Vivien Mácsay, Tamás Bányai
Published in: Journal of Production Engineering, Issue 20/1, 2017, Page(s) 141-146, ISSN 1821-4932
Publisher: University of Novi Sad
DOI: 10.24867/jpe-2017-01-141

Sensor Networks for Smart Manufacturing Processes

Author(s): József Konyha, Tamás Bányai
Published in: Solid State Phenomena, Issue 261, 2017, Page(s) 456-462, ISSN 1662-9779
Publisher: Scientific.net
DOI: 10.4028/www.scientific.net/ssp.261.456

Modelling of just-in-sequence supply of manufacturing processes

Author(s): Tamás Bányai, Ágota Bányai
Published in: MATEC Web of Conferences, Issue 112, 2017, Page(s) 06025, ISSN 2261-236X
Publisher: EDP Sciences
DOI: 10.1051/matecconf/201711206025

Optimization of Consignment-Store-Based Supply Chain with Black Hole Algorithm

Author(s): Ágota Bányai, Tamás Bányai, Béla Illés
Published in: Complexity, Issue 2017, 2017, Page(s) 1-12, ISSN 1076-2787
Publisher: John Wiley & Sons Inc.
DOI: 10.1155/2017/6038973

Markov-Chain Simulation-Based Analysis of Human Resource Structure: How Staff Deployment and Staffing Affect Sustainable Human Resource Strategy

Author(s): Tamás Bányai, Christian Landschützer, Ágota Bányai
Published in: Sustainability, Issue 10/10, 2018, Page(s) 3692, ISSN 2071-1050
Publisher: MDPI Open Access Publishing
DOI: 10.3390/su10103692

Last mile logistics: an integrated view

Author(s): János Juhász, Tamás Bányai
Published in: IOP Conference Series: Materials Science and Engineering, Issue 448, 2018, Page(s) 012026, ISSN 1757-899X
Publisher: IOP Publishing Ltd
DOI: 10.1088/1757-899x/448/1/012026

Smart Scheduling: An Integrated First Mile and Last Mile Supply Approach

Author(s): Tamás Bányai, Béla Illés, Ágota Bányai
Published in: Complexity, Issue 2018, 2018, Page(s) 1-15, ISSN 1076-2787
Publisher: John Wiley & Sons Inc.
DOI: 10.1155/2018/5180156

Real-Time Decision Making in First Mile and Last Mile Logistics: How Smart Scheduling Affects Energy Efficiency of Hyperconnected Supply Chain Solutions

Author(s): Tamás Bányai
Published in: Energies, Issue 11/7, 2018, Page(s) 1833, ISSN 1996-1073
Publisher: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en11071833

Economic aspects of decision making in production processes with uncertain component quality

Author(s): Tamás Bányai
Published in: Engineering Economics, Issue 30/1, 2019, ISSN 1392-2785
Publisher: Kaunas University of Technology
DOI: 10.5755/j01.ee.30.1.19324

Optimization of Municipal Waste Collection Routing: Impact of Industry 4.0 Technologies on Environmental Awareness and Sustainability

Author(s): Tamás Bányai, Péter Tamás, Béla Illés, Živilė Stankevičiūtė, Ágota Bányai
Published in: International Journal of Environmental Research and Public Health, Issue 16/4, 2019, Page(s) 634, ISSN 1660-4601
Publisher: mdpi
DOI: 10.3390/ijerph16040634

Smart Cyber-Physical Manufacturing: Extended and Real-Time Optimization of Logistics Resources in Matrix Production

Author(s): Ágota Bányai, Béla Illés, Elke Glistau, Norge Isaias Coello Machado, Péter Tamás, Faiza Manzoor, Tamás Bányai
Published in: Applied Sciences, Issue 9/7, 2019, Page(s) 1287, ISSN 2076-3417
Publisher: mdpi
DOI: 10.3390/app9071287

Többszintű optimáló algoritmus alkalmazása

Author(s): Kota, László ; Jármai, Károly
Published in: GÉP, Issue 69 : 2 (2018), 2018, Page(s) pp. 32-35. , 4 p., ISSN 0016-8572
Publisher: Gépipari Tudományos Egyesület

Az OZone program használata

Author(s): Jármai, Károly ; Kota, László
Published in: MAGÉSZ ACÉLSZERKEZETEK, Issue 15 : 4 (2018), 2018, Page(s) pp. 28-32. , 5 p., ISSN 1785-4822
Publisher: Magyar Acélszerkezeti Szövetség

Az Open Journal Systems rendszer bemutatása

Author(s): Jármai, Károly ; Kota, László
Published in: GÉP, Issue 67 : 3 (2016), 2016, Page(s) pp. 18-22. , 5 p., ISSN 0016-8572
Publisher: Gépipari Tudományos Egyesület

Effect of the Safety Stock on the Probability of Occurrence of the Stock Shortage

Author(s): János Korponai, Ágota Bányainé Tóth, Béla Illés
Published in: Procedia Engineering, Issue 182, 2017, Page(s) 335-341, ISSN 1877-7058
Publisher: Elsevier
DOI: 10.1016/j.proeng.2017.03.106

The Effect of the Safety Stock on the Occurrence Probability of the Stock Shortage

Author(s): János Korponai, Ágota Bányainé Tóth, Béla Illés
Published in: Management and Production Engineering Review, Issue 8/1, 2017, Page(s) 69-77, ISSN 2082-1344
Publisher: De Gruyter
DOI: 10.1515/mper-2017-0008

Context of the inventory management expenses in the case of planned shortages

Author(s): János Korponai, Ágota Bányainé Tóth, Béla Illés
Published in: Engineering Management in Production and Services, Issue 9/1, 2017, Page(s) 26-35, ISSN 2543-912X
Publisher: De Gruyter
DOI: 10.1515/emj-2017-0003

Supply Chain Design of Manufacturing Processes with Blending Technologies

Author(s): Ágota Bányainé Tóth, Béla Illés, Fabian Schenk
Published in: Solid State Phenomena, Issue 261, 2017, Page(s) 509-515, ISSN 1662-9779
Publisher: Scientific.net
DOI: 10.4028/www.scientific.net/ssp.261.509

Impact of Industry 4.0 on production logistics

Author(s): G Nagy, B Illés, Á Bányai
Published in: IOP Conference Series: Materials Science and Engineering, Issue 448, 2018, Page(s) 012013, ISSN 1757-899X
Publisher: IOP Publishing Ltd
DOI: 10.1088/1757-899x/448/1/012013

The improvement of the efficiency of purchasing by networking operation

Author(s): Gábor, Nagy ; Ágota, Bányai ; Béla, Illés
Published in: ADVANCED LOGISTIC SYSTEMS: THEORY AND PRACTICE, Issue 10 : 2 (2016), 2016, Page(s) pp. 79-90. , 12 p., ISSN 1789-2198
Publisher: University of Miskolc

Examining the Integration Possibilities for Lean Tools and Simulation Modeling

Author(s): Péter Tamás, Béla Illés
Published in: Solid State Phenomena, Issue 261, 2017, Page(s) 516-522, ISSN 1662-9779
Publisher: Scientific.net
DOI: 10.4028/www.scientific.net/ssp.261.516

Innovative Business Model for Realization of Sustainable Supply Chain at the Outsourcing Examination of Logistics Services

Author(s): Péter Tamás
Published in: Sustainability, Issue 10/1, 2018, Page(s) 210, ISSN 2071-1050
Publisher: MDPI Open Access Publishing
DOI: 10.3390/su10010210

Application possibilities of the Big Data concept in Industry 4.0

Author(s): P Dobos, P Tamás, B Illés, R Balogh
Published in: IOP Conference Series: Materials Science and Engineering, Issue 448, 2018, Page(s) 012011, ISSN 1757-899X
Publisher: IOP Publishing
DOI: 10.1088/1757-899x/448/1/012011

APPLICATION OF A SIMULATION INVESTIGATIONAL METHOD FOR EFFICIENCY IMPROVEMENT OF SMED METHOD

Author(s): Tamás Péter
Published in: Academic Journal of Manufacturing Engineering, Issue 15 : 2 (2017), 2017, Page(s) pp. 23-30., ISSN 1583-7904
Publisher: Editura Politehnica

SELECTION OF OPTIMAL WAREHOUSE CAPACITY ENLARGMENT POSSIBILITY USING THE CHURCHMAN-ACKOFF WEIGHTING METHOD

Author(s): Tamás, Péter
Published in: TRANSPORT & LOGISTICS: the International Journal, Issue 17 : 43 (2017), 2017, Page(s) 50-58. , 9 p., ISSN 2406-1069
Publisher: University of Belgrade,Technical University of Košice

LEAN ESZKÖZÖK HATÉKONYSÁGNÖVELÉSE SZIMULÁCIÓS MODELLEZÉS FELHASZNÁLÁSÁVAL

Author(s): Tamás Péter
Published in: LOGISZTIKA - INFORMATIKA - MENEDZSMENT , Issue 2 : 1 (2017), 2017, Page(s) pp. 61-70. , 10 p., ISSN 2498-9037
Publisher: Budapest Business School

SMED MÓDSZER HATÉKONYSÁGNÖVELÉSE SZIMULÁCIÓS VIZSGÁLATI MÓDSZER ALKALMAZÁSÁVAL

Author(s): Tamás Péter
Published in: LOGISZTIKA-INFORMATIKA-MENEDZSMENT, Issue 17 : 43 (2017), 2017, Page(s) pp. 57-63., ISSN 2498-9037
Publisher: Budapest Business School

Examination of improvement possibilities in warehouse management systems

Author(s): Szabolcs, Szentesi ; Dr. Péter, Tamás ; Dr. Béla, Illés
Published in: TRANSPORT & LOGISTICS: the International Journal, Issue 17 : 43 (2017), 2017, Page(s) pp. 57-63., ISSN 2406-1069
Publisher: University of Belgrade,Technical University of Košice

NOVEL TRENDS IN IMPROVEMENT OF WAREHOUSE MANAGEMENT SYSTEMS FOR MANFACTURING COMPANIES

Author(s): Péter, Tamás ; Béla, Illés
Published in: Academic Journal of Manufacturing Engineering, Issue 15 : 3 (2017), 2017, Page(s) pp. 23-28. , 6 p., ISSN 1583-7904
Publisher: Editura Politehnica

Novel trends in improvement of warehouse management systems for manfacturing companies

Author(s): Szabolcs, Szentesi ; Péter, Tamás ; Béla, Illés
Published in: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Issue 16 : 1 (2018), 2018, Page(s) pp. 33-37. , 5 p., ISSN 1583-7904
Publisher: Editura Politehnica

Collaborating robots in Industry 4.0 conception

Author(s): R Benotsmane, L Dudás, Gy Kovács
Published in: IOP Conference Series: Materials Science and Engineering, Issue 448, 2018, Page(s) 012023, ISSN 1757-899X
Publisher: IOP Publishing
DOI: 10.1088/1757-899x/448/1/012023

NEW LOGISTICS AND PRODUCTION TRENDS AS THE EFFECT OF GLOBAL ECONOMY CHANGES

Author(s): Gyorgy Kovacs, Sebastian Kot
Published in: Polish Journal of Management Studies, Issue 14/2, 2016, Page(s) 115-126, ISSN 2081-7452
Publisher: Czestochowa University of Technology
DOI: 10.17512/pjms.2016.14.2.11

LOGISTICS AND PRODUCTION PROCESSES TODAY AND TOMORROW

Author(s): György Kovács
Published in: Acta logistica, Issue 3/4, 2016, Page(s) 1-5, ISSN 1339-5629
Publisher: 4S go, s.r.o.
DOI: 10.22306/al.v3i4.71

GLOBAL PRODUCTION TENDENCIES – LEAN MANUFACTURING PHILOSOPHY

Author(s): György Kovács
Published in: Journal of Production Engineering, Issue 20/1, 2017, Page(s) 137-140, ISSN 1821-4932
Publisher: University of Novi Sad
DOI: 10.24867/jpe-2017-01-137

Development of performance evaluation software for road freight transport activity

Author(s): Kovács, György
Published in: POLISH JOURNAL OF MANAGEMENT STUDIES, Issue 15 : 1, 2017, Page(s) pp. 121-134. , 14 p., ISSN 2081-7452
Publisher: Czestochowa University of Technology

OPTIMIZATION METHOD AND SOFTWARE FOR FUEL COST REDUCTION IN CASE OF ROAD TRANSPORT ACTIVITY

Author(s): György Kovács
Published in: Acta Polytechnica, Issue 57/3, 2017, Page(s) 201-208, ISSN 1210-2709
Publisher: Czech Technical University, Publishing House
DOI: 10.14311/ap.2017.57.0201

GLOBAL ECONOMIC CHANGES, OPTIMIZATION OF VIRTUAL ENTERPRISES - SOFTWARE DEVELOPMENT

Author(s): György Kovács
Published in: Polish Journal of Management Studies, Issue 15/2, 2017, Page(s) 125-131, ISSN 2081-7452
Publisher: Czestochowa University of Technology
DOI: 10.17512/pjms.2017.15.2.11

Planning of Optimal Fuel Supply of International Transport Activity

Author(s): György Kovács, Miklós Gubán
Published in: Periodica Polytechnica Transportation Engineering, Issue 45/4, 2017, Page(s) 186, ISSN 0303-7800
Publisher: Budapesti Muszaki es Gazdasagtudomanyi Egyetem/Budapest University of Technology and Economics
DOI: 10.3311/pptr.10843

First Cost Calculation Methods for Road Freight Transport Activity

Author(s): György Kovács
Published in: Transport and Telecommunication Journal, Issue 18/2, 2017, Page(s) 107-117, ISSN 1407-6179
Publisher: Transport and Telecommunication Institute, Lomonosova 1, Riga, LV-1019, Latvia
DOI: 10.1515/ttj-2017-0010

Methods for Efficiency Improvement of Production and Logistic Processes

Author(s): György Kovács
Published in: Research Papers Faculty of Materials Science and Technology Slovak University of Technology, Issue 26/42, 2018, Page(s) 55-61, ISSN 1338-0532
Publisher: SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA
DOI: 10.2478/rput-2018-0006

Development of an Optimization Method and Software for Optimizing Global Supply Chains for Increased Efficiency, Competitiveness, and Sustainability

Author(s): György Kovács, Béla Illés
Published in: Sustainability, Issue 11/6, 2019, Page(s) 1610, ISSN 2071-1050
Publisher: MDPI Open Access Publishing
DOI: 10.3390/su11061610

Logisztika és digitalizálás

Author(s): Illés Béla
Published in: Logisztikai Évkönyv, Issue 2017, 2017, Page(s) pp. 30-36, ISSN 1218-3849
Publisher: Magyar Logisztikai Egyesület

COOPERATION IN LOGISTICS TECHNOLOGY RESEARCH: HOW TWINNING PROJECT AFFECTS R+D IN THE FIELD OF LOGISTIC SYSTEMS AND NETWORKS

Author(s): Bányai Tamás, Illés Béla, Christian Landschützer, Fabian Schenk, Flavien Massi
Published in: Advanced Logistic Systems – Theory and Practice, Issue 12(1), 2018, Page(s) 61-76, ISSN 1789-2198
Publisher: Miskolc University Press

ARTIFICIAL INTELLIGENCE IN LOGISTICS APPLICATIONS AND ALGORITHMS

Author(s): LÁSZLÓ KOTA
Published in: Advanced Logistic Systems – Theory and Practice, Issue 12(1), 2018, Page(s) 47-60, ISSN 1789-2198
Publisher: Miskolc University Press

THE CONCEPT OF AUTONOMOUS SYSTEMS IN INDUSTRY 4.0

Author(s): RABAB BENOTSMANE, LÁSZLÓ DUDÁS, GYÖRGY KOVÁCS
Published in: Advanced Logistic Systems – Theory and Practice, Issue 12(1), 2018, Page(s) 77-87, ISSN 1789-2198
Publisher: Miskolc University Press

Material handling machines and systems – UMi-TWINN project contribution

Author(s): Péter Telek; Béla Illés; Christian Landschützer; Fabian Schenk; Flavien Massi
Published in: Advanced Logistic Systems – Theory and Practice, Issue 12(1), 2018, Page(s) 7-20, ISSN 1789-2198
Publisher: Miskolc University Press

Introduction of Demo3D into the scientific education of material handling

Author(s): Péter Telek; Wolfgang Trummer
Published in: Advanced Logistic Systems – Theory and Practice, Issue 12(1), 2018, Page(s) 61-76, ISSN 1789-2198
Publisher: Miskolc University Press

Application of Value Stream Mapping at Flexible Manufacturing Systems

Author(s): Péter Tamás
Published in: Key Engineering Materials, Issue 686, 2016, Page(s) 168-173, ISSN 1662-9795
Publisher: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.686.168

Decision method for optimal selection of warehouse material handling strategies by production companies

Author(s): P Dobos, P Tamás and B Illés
Published in: IOP Conference Series: Materials Science and Engineering, Issue Vol. 161 (2016), 2016, Page(s) pp. 1-7., ISSN 1757-899X
Publisher: IOP Publishing
DOI: 10.1088/1757-899X/161/1/012100

Waste reduction possibilities for manufacturing systems in the industry 4.0

Author(s): P Tamás, B Illés and P Dobos
Published in: IOP Conference Series: Materials Science and Engineering, Issue Vol. 161 (2016), 2016, Page(s) pp. 1-8., ISSN 1757-899X
Publisher: IOP Publishing
DOI: 10.1088/1757-899X/161/1/012074

Sensibility analysis of the planned availability period and of the impact of the cost factors on total costs

Author(s): János Korponai, Ágota Bányai, Béla Illés
Published in: Advanced Logistic Systems: Theory and Practice, Issue Vol 10/1 (2016), 2016, Page(s) pp. 13-28., ISSN 1789-2198
Publisher: University of Miskolc

Material flow relations in the design process of materials handling

Author(s): Péter Telek
Published in: Advanced Logistic Systems: Theory and Practice, Issue Vol. 10/1 (2016), 2016, Page(s) pp. 53-64., ISSN 1789-2198
Publisher: University of Miskolc

Supply chain agility in humanitarian logistics

Author(s): Tamás Bányai
Published in: Advanced Logistic Systems: Theory and Practice, Issue Vol. 10/1 (2016), 2016, Page(s) pp. 75-81., ISSN 1789-2198
Publisher: University of Miskolc

Approach to accelerate algorithms to solve logistic problems with GPGPU

Author(s): József Konyha, Tamás Bányai
Published in: Advanced Logistic Systems: Theory and Practice, Issue Vol. 10/2 (2016), 2016, Page(s) pp. 5-10., ISSN 1789-2198
Publisher: University of Miskolc

Improvement possibilities for the method of value stream mapping

Author(s): Szabolcs Szentesi, Péter Tamás, Béla Illés
Published in: Advanced Logistic Systems: Theory and Practice, Issue Vol. 10/2 (2016), 2016, Page(s) pp. 39-48., ISSN 1789-2198
Publisher: University of Miskolc

Sourcing process improvement with six sigma methodology

Author(s): Adél Anett Szabó, Ágota Bányai
Published in: Advanced Logistic Systems: Theory and Practice, Issue Vol. 10/2 (2016), 2016, Page(s) pp. 59-64., ISSN 1789-2198
Publisher: University of Miskolc

Simulation method for design and analysis of logistical processes

Author(s): György Kovács
Published in: Advanced Logistic Systems: Theory and Practice, Issue Vol. 10/2 (2016), 2016, Page(s) pp. 65-70., ISSN 1789-2198
Publisher: University of Miskolc

Computer algorithm for determination of material flow relations

Author(s): Péter Telek
Published in: Advanced Logistic Systems: Theory and Practice, Issue Vol. 10/2 (2016), 2016, Page(s) pp. 71-78., ISSN 1789-2198
Publisher: University of Miskolc

Development of courier companies as for the e-commerce market service

Author(s): Gábor Nagy, Ágota Bányai, Béla Illés
Published in: Advanced Logistic Systems: Theory and Practice, Issue Vol. 10/2 (2016), 2016, Page(s) pp. 79-90., ISSN 1789-2198
Publisher: University of Miskolc

Optimisation of knapsack problem with matlab, based on harmony search algorithm

Author(s): Bányai Tamás, Veres Péter
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 7 No.1, 2013, Page(s) pp. 13-20, ISSN 1789-2198
Publisher: University of Miskolc

Optimisation of production depth

Author(s): Bányai Tamás, Veres Péter
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 7 No.2, 2013, Page(s) pp. 85-94, ISSN 1789-2198
Publisher: University of Miskolc

Build to sequence supply

Author(s): Bányai Tamás
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 7 No.2, 2013, Page(s) pp. 35-40, ISSN 1789-2198
Publisher: University of Miskolc

How to support purchasing with ERP systems as integrator of novel logistic tools?

Author(s): Bányai Ágota
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 7 No.1, 2013, Page(s) pp. 7-12, ISSN 1789-2198
Publisher: University of Miskolc

Complex design of integrated material flow systems

Author(s): Telek Péter, Bányai Tamás
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 7 No.2, 2013, Page(s) pp. 105-110, ISSN 1789-2198
Publisher: University of Miskolc

Just in sequence supply with multilevel cross docking

Author(s): Bányai Ágota
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 7 No.2, 2013, Page(s) pp. 5-12, ISSN 1789-2198
Publisher: University of Miskolc

Equipment preselection for integrated design of materials handling systems

Author(s): Telek Péter
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 7 No.2, 2013, Page(s) pp. 57-66, ISSN 1789-2198
Publisher: University of Miskolc

Development of e-learning curricula in the field of logistics

Author(s): Bányai Ágota, Borodavko Beáta, Illés Béla
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 7 No.2, 2013, Page(s) pp. 103-108, ISSN 1789-2198
Publisher: University of Miskolc

Mathematical Modeling of the Unit Load Formation

Author(s): Béla Illés, Gabriella Bognár
Published in: Applied Mechanics and Materials, Issue 16627482, 2013, Page(s) 358-365, ISSN 1662-7482
Publisher: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.309.358

The alteration of the Hungarian toll payment system in 2013, activity support with the application of a fleet management system

Author(s): Kovács György, Zakar katalin
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 7 No.1, 2013, Page(s) pp. 111-116, ISSN 1789-2198
Publisher: University of Miskolc

CAN Message Filter Algorithms for Remote Diagnostics of Vehicles

Author(s): Attila Trohák, Béla Illés, Zoltán Biró
Published in: Applied Mechanics and Materials, Issue 16627482, 2013, Page(s) 213-220, ISSN 1662-7482
Publisher: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.309.213

On the Multi-Level Unit Load Formation Model

Author(s): Béla Illés, Gabriella Bognár
Published in: Key Engineering Materials, Issue 16629795, 2013, Page(s) 519-526, ISSN 1662-9795
Publisher: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.581.519

Sensitivity Analysis of Road Transport by Sensibility of Production-Function

Author(s): Béla Illés, János Németh
Published in: Key Engineering Materials, Issue 16629795, 2013, Page(s) 539-546, ISSN 1662-9795
Publisher: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.581.539

Mathematical Model for the Homogenization of Unit Load Formation

Author(s): Béla Illés, Gabriella Bognár
Published in: Journal of Applied Mathematics and Physics, Issue 23274352, 2014, Page(s) 14-20, ISSN 2327-4352
Publisher: Scientific Research
DOI: 10.4236/jamp.2014.21003

Introducing a Risk-Management Concept for Holonic Manufacturing Supply Chains

Author(s): Róbert Skapinyecz, Béla Illés
Published in: Key Engineering Materials, Issue 16629795, 2013, Page(s) 547-553, ISSN 1662-9795
Publisher: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.581.547

Heuristic Supply Chain Optimization of Networked Maintenance Companies

Author(s): Tamás Bányai, Péter Veres, Béla Illés
Published in: Procedia Engineering, Issue 18777058, 2015, Page(s) 46-55, ISSN 1877-7058
Publisher: Elsevier
DOI: 10.1016/j.proeng.2015.01.341

Cloud Logisztics

Author(s): Ágota Bányai
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 8 No.1, 2014, Page(s) pp. 11-16, ISSN 1789-2198
Publisher: University of Miskolc

Application of device preselection for discontinuous unit handling

Author(s): Péter Telek
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 8 No.1, 2014, Page(s) pp. 93-102, ISSN 1789-2198
Publisher: University of Miskolc

Examination of scheduling methods for production systems

Author(s): Zoltán Varga, Pál Simon
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 8 No.1, 2014, Page(s) pp. 111-120, ISSN 1789-2198
Publisher: University of Miskolc

GPRS based remote monitoring system to support logistic decisions

Author(s): József Konyha, Tamás Bányai
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 8 No.1, 2014, Page(s) pp. 67-76, ISSN 1789-2198
Publisher: University of Miskolc

The effect of different packaging concepts on logistical costs and stocks

Author(s): Korponai János, Bányai Ágota, Illés Béla
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 8 No.2, 2014, Page(s) pp. 35-50, ISSN 1789-2198
Publisher: University of Miskolc

Serving times of discontinuous material handling machines

Author(s): Péter Telek
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 8 No.2, 2014, Page(s) pp. 87-96, ISSN 1789-2198
Publisher: University of Miskolc

Process-oriented risk assessment in integrated logistics networks: an AHP approach

Author(s): Róbert Skapinyecz, Béla Illés
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 9 No.1, 2015, Page(s) pp. 61-72, ISSN 1789-2198
Publisher: University of Miskolc

Conception for selection of adequate warehouse material handling strategy

Author(s): Dobos Péter, Illés Béla, Tamás Péter
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 9 No.1, 2015, Page(s) pp. 53-59, ISSN 1789-2198
Publisher: University of Miskolc

The aspects of logistics development of air transport in Hungarian airports

Author(s): Varga Zoltán, Mang Béla
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 9 No.1, 2015, Page(s) pp. 41-51, ISSN 1789-2198
Publisher: University of Miskolc

The effect of the supply accuracy and the demand-changes on the inventories and on the costs

Author(s): János Korponai, Ágota Bányai, Béla Illés
Published in: Advanced Logistic Systems: Theory and Practice , Issue Vol. 9 No.1, 2015, Page(s) pp. 5-16, ISSN 1789-2198
Publisher: University of Miskolc

Mathematical model for optimal fuel supply of international transport activity

Author(s): Miklós Gubán, György Kovács
Published in: Annals of Faculty Engineering Hunedoara – International Journal of Engineering, Issue Tome XIV (2016), Fascicule 3 (August), 2016, Page(s) 29.-34., ISSN 1584-2665
Publisher: University Politehnica Timisoara, Faculty of Engineering Hunedoara

Az igényváltozások hatása a vásárolt alkatrész készletekre és a költségekre

Author(s): Korponai János, Bányainé Tóth Ágota, Illés Béla
Published in: Repüléstudományi közlemények, Issue XXVIII./2. (2016), 2017, Page(s) 15-32, ISSN 1789-770X
Publisher: NKE KRI

Examination of improvement possibilities in warehouse management systems

Author(s): Tamas, Péter ; Dobos, Péter ; Illés, Béla
Published in: LOGISTICS JOURNAL, Issue Vol. 2017., 2017, Page(s) 1-6. , 6 p., ISSN 1860-5923
Publisher: Wissenschaftliche Gesellschaft für Technische Logistik (WGTL)
DOI: 10.2195/lj_notrev_tamas_en_201709_01

Gyártórendszerek folyamatfejlesztési lehetőségei a negyedik ipari forradalomban/Process improvement possibilities for manufacturing systems in the industry 4.0

Author(s): Tamás Péter, Illés Béla
Published in: Műszaki Szemle, Issue No. 67. (2016), 2016, Page(s) pp. 41-48., ISSN 1454-0746
Publisher: Hungarian Technical Scientific Society of Transylvania

New supply chain concepts, flexibility as a key parameter of agile supply chains

Author(s): Zoltán Varga, György Kovács
Published in: Acta Technología, International Scientific Journal about Technologies, Issue Vol. 2, Issue 4, 2016, 2016, Page(s) pp. 1-5., ISSN 2453-675X
Publisher: 4S go, Ltd.

A Lean ellátási láncok jellemzőinek bemutatása

Author(s): Kovács György
Published in: Műszaki Szemle, Issue VOL. 68, 2016, 2016, Page(s) pp. 8-12., ISSN 1454-0746
Publisher: Hungarian Technical Scientific Society of Transylvania

Just-in-sequence ellátási stratégiák

Author(s): Bányai Tamás
Published in: Multidiszciplináris Tudományok: A Miskolci Egyetem közleménye, Issue 20629737, 2013, Page(s) pp. 141-152, ISSN 2062-9737
Publisher: University of Miskolc

Közúti és légi kombinált fuvarozás közötti választás a földrajzi elhelyezkedés és az átfutási idő függvényében

Author(s): Korponai János, Bányai Ágota, Illés Béla
Published in: Repüléstudományi Közlemények, Issue 14170604, 2015, Page(s) pp. 140-147, ISSN 1417-0604
Publisher: National University of Public Service

The concept of a virtual logistics center for a Hungarian Region

Author(s): Tamás Péter, Illés Béla
Published in: Journal of Production Engineering , Issue 18214932, 2015, Page(s) pp. 107-110, ISSN 1821-4932
Publisher: University of Novi Sad

Simulation examination of logistics systems in the automotive industry

Author(s): Tamás Péter, Illés Béla
Published in: Journal of Production Engineering , Issue 18214932, 2015, Page(s) pp. 69-72, ISSN 1821-4932
Publisher: University of Novi Sad

Hálózatszerű szolgáltató rendszer tervezése

Author(s): Péter Veres, Tamás Bányai, Béla Illés
Published in: Repüléstudományi Közlemények, Issue 14170604, 2015, Page(s) pp. 143-153, ISSN 1417-0604
Publisher: National University of Public Service

Advanced Materials Handling Processes and Devices in the Automotive Industry

Author(s): Péter Telek, Tamás Bányai
Published in: Vehicle and Automotive Engineering 2, 2018, Page(s) 315-328, ISBN 978-3-319-75676-9
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-75677-6_26

Milkrun Based In-plant Supply – An Automotive Approach

Author(s): Tamás Bányai, Péter Telek, Christian Landschützer
Published in: Vehicle and Automotive Engineering 2, 2018, Page(s) 170-185, ISBN 978-3-319-75676-9
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-75677-6_14

What Industry 4.0 Means for Just-In-Sequence Supply in Automotive Industry?

Author(s): János Juhász, Tamás Bányai
Published in: Vehicle and Automotive Engineering 2, 2018, Page(s) 226-240, ISBN 978-3-319-75676-9
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-75677-6_19

Application of Multilevel Optimization Algorithms

Author(s): László Kota, Károly Jármai
Published in: Advances in Structural and Multidisciplinary Optimization, 2018, Page(s) 710-715, ISBN 978-3-319-67987-7
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-67988-4_54

Analysis of Supply Chain Efficiency in Blending Technologies

Author(s): Gábor Nagy, Ágota Bányainé Tóth, Béla Illés, Elke Glistau
Published in: Vehicle and Automotive Engineering 2, 2018, Page(s) 280-291, ISBN 978-3-319-75676-9
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-75677-6_23

Logistics and Digitization

Author(s): Béla Illés, Attila K. Varga, László Czap
Published in: Vehicle and Automotive Engineering 2, 2018, Page(s) 220-225, ISBN 978-3-319-75676-9
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-75677-6_18

Supply Chain Optimization in Automotive Industry: A Comparative Analysis of Evolutionary and Swarming Heuristics

Author(s): Péter Veres, Béla Illés, Christian Landschützer
Published in: Vehicle and Automotive Engineering 2, 2018, Page(s) 666-676, ISBN 978-3-319-75676-9
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-75677-6_57

Logisztikai trendek a globalizáció tükrében

Author(s): Illés Béla
Published in: Báthory – Brassai Nemzetközi Tudományos Konferencia, 2013, Page(s) pp. 80-92
Publisher: Tibor Tuzson

Presenting a Logistics Oriented Research Project in the Field of E-marketplace Integrated Virtual Enterprises

Author(s): Róbert Skapinyecz, Béla Illés
Published in: Applied Information Science, Engineering and Technology, 2014, Page(s) 197-211, ISBN 978-3-319-01919-2
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-01919-2_11

Logisztikai hálózatok rizikótényezőinek kezelése

Author(s): Skapinyecz Róbert
Published in: 2018
Publisher: University of Miskolc

Deliverables

Publications

Share this page

Download