Reinforcing the scientific excellence and innovation capacity in logistics technologies of the University of Miskolc

Korszerű logisztikai tantárgy MOOC rendszerben történt megvalósításának bemutatása

Autori: Illés Béla, Skapinyecz Róbert, Tamás Péter
Pubblicato in: The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference, Numero No. 30., 2016.04.21.-2016.04.22., 2016, ISBN 978-963-358-113-1
Editore: University of Miskolc

Design problems of conveyors

Autori: Péter Telek
Pubblicato in: The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference, Numero No. 30., 2016.04.21.-2016.04.22., 2016, ISBN 978-963-358-113-1
Editore: University of Miskolc

Logisztikai trendek, UMi-TWINN projekt

Autori: Illés Béla
Pubblicato in: The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference, Numero No. 30., 2016.04.21.-2016.04.22., 2016, ISBN 978-963-358-113-1
Editore: University of Miskolc

Észak-Magyarországi virtuális logisztikai központ koncepciója

Autori: Tamás Péter, Illés Béla
Pubblicato in: The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference, Numero No. 30., 2016.04.21.-2016.04.22., 2016, ISBN 978-963-358-113-1
Editore: University of Miskolc

Igényváltozások, időhorizontok és a készletszint közötti összefüggés

Autori: Korponai János, Bányainé Tóth Ágota, Illés Béla
Pubblicato in: The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference, Numero No. 30., 2016.04.21.-2016.04.22., 2016, ISBN 978-963-358-113-1
Editore: University of Miskolc

Results of the UMI-TWINN Project During Months 1-15

Autori: Béla Illés, Péter Telek
Pubblicato in: MultiScience - XXXI. microCAD International Multidisciplinary Scientific Conference, 2017, Pagina/e 6 p.
Editore: University of Miskolc

Wearable solutions for efficient manual logistics processes - RFID Wristband and Smart-Glasses

Autori: Olaf, Poenicke ; Martin, Kirch ; Klaus, Richter ; Falko, Schmid ; Péter, Telek
Pubblicato in: 4th International Physical Internet Conference, 2017, Pagina/e pp. 171-180. , 10 p.
Editore: Medienfabrik Graz

A new network concept for Logistic Centres in Hungary – regional segmentation in line with the PI vision

Autori: Florian, Ehrentraut ; Christian, Landschützer ; Péter, Telek ; Tamás, Bányai
Pubblicato in: Proceedings of the 5th International Physical Internet Conference, 2018, Pagina/e pp. 129-141.
Editore: University of Groningen

Telematikai alapú logisztikai megoldások az igényvezérelt helyközi közlekedési szolgáltatásokban Magyarországon

Autori: Sárközi György, Illés Béla, Wagner György
Pubblicato in: MultiScience - XXXI. microCAD International Multidisciplinary Scientific Conference, Numero 20-21 April 2017, 2017, Pagina/e Section C1, 2. paper, 6 p., ISBN 978-963-358-132-2
Editore: University of Miskolc

Raktári anyagmozgatási stratégia optimális kialakításának döntési módszere termelő vállalatoknál

Autori: Dobos Péter, Dr. Tamás Péter, Dr. Illés Béla
Pubblicato in: 3rd FORUM OF APPLIED SCIENCES, Numero 2016 March 10-11., 2017, Pagina/e 169-178, ISBN 978-963-7159-23-7
Editore: Budapest Business School, University of Applied Sciences

A folyamatmodellezés jövője a logisztikában

Autori: Skapinyecz Róbert, Illés Béla, Tamás Péter, Lajos Sándor, Szentesi Szabolcs
Pubblicato in: 3rd FORUM OF APPLIED SCIENCES, Numero 2016 March 10-11, 2017, Pagina/e 760-782, ISBN 978-963-7159-23-7
Editore: Budapest Business School, University of Applied Sciences

A folyamatfejlesztés módszerei szakaszos gyártási rendszereknél

Autori: Szentesi Szabolcs, Illés Béla, Tamás Péter
Pubblicato in: 3rd FORUM OF APPLIED SCIENCES, Numero 2016 March 10-11., 2017, Pagina/e 804-813, ISBN 978-963-7159-23-7
Editore: Budapest Business School, University of Applied Sciences

Járattervezés előre nem definiált objektumok között

Autori: Veres Péter, Bányai tamás, Illés Béla
Pubblicato in: 3rd FORUM OF APPLIED SCIENCES, Numero 2016 March 10-11, 2017, Pagina/e 880-890, ISBN 978-963-7159-23-7
Editore: Budapest Business School, University of Applied Sciences

Intelligent Transportation Systems to Support Production Logistics

Autori: Péter Veres, Tamás Bányai, Béla Illés
Pubblicato in: Lecture Notes in Mechanical Engineering/Vehicle and Automotive Engineering, 2017, Pagina/e 245-256
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-51189-4_24

The Context Between the Shift of Average Demand and the Safety Stock of Purchased Parts

Autori: János Korponai, Ágota Bányainé Tóth, Béla Illés
Pubblicato in: Lecture Notes in Mechanical Engineering/Vehicle and Automotive Engineering, 2017, Pagina/e 275-285
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-51189-4_26

Description of a Method for the Handling of Customer Needs in Logistics

Autori: Béla Illés, Róbert Skapinyecz, György Wagner
Pubblicato in: Lecture Notes in Mechanical Engineering/Vehicle and Automotive Engineering, 2017, Pagina/e 341-354
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-51189-4_31

Optimal Formation of Logistics Networks

Autori: György Kovács, Zoltán Varga, Márk Mihalik
Pubblicato in: Lecture Notes in Mechanical Engineering/Vehicle and Automotive Engineering, 2017, Pagina/e 391-403
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-51189-4_35

Raktárbővítési lehetőség kiválasztásának módszere

Autori: Dr. Tamás Péter, Dr. Illés Béla, Fekete Dávid
Pubblicato in: FMTÜ: Fiatal Műszakiak Tudományos Ülésszaka, 2013, Pagina/e pp. 407-411
Editore: Erdélyi Múzeum-Egyesület

Mutatószámok vizsgálata a vállalati logisztikai rendszerben

Autori: Korponai János, Bányainé Tóth Ágota, Illés Béla
Pubblicato in: The Publications of the MultiScience - XXIX. microCAD International Multidisciplinary Scientific Conference, 2015
Editore: University of Miskolc

Vállalatok közötti stratégiai együttműködés

Autori: Korponai János, Bányainé Tóth Ágota, Illés Béla
Pubblicato in: Műszaki Tudomány az Észak-Kelet Magyarországi Régióban, 2015, Pagina/e pp. 127-134
Editore: Debreceni Akadémiai Bizottság Műszaki Szakbizottsága

The sensibility inspection of supply chains based on logistics aspects

Autori: Beáta Borodavko, Béla Illés, Ágota Bányai
Pubblicato in: The Publications of the MultiScience - XXIX. microCAD International Multidisciplinary Scientific Conference, 2015
Editore: University of Miskolc

Design of networking service systems

Autori: Péter Veres, Tamás Bányai, Béla Illés
Pubblicato in: The Publications of the MultiScience - XXIX. microCAD International Multidisciplinary Scientific Conference, 2015
Editore: University of Miskolc

The function of the replenishment time in the purchasing.

Autori: János Korponai, Ágota Bányainé Tóth, Béla Illés
Pubblicato in: Proceedings of the 3rd International Scientific Conference on Advances in Mechanical Engineering (ISCAME 2015), 2015, Pagina/e pp. 90-95
Editore: University of Debrecen

Application of simulation modeling for formation of pull-principled production control system

Autori: Péter Tamás
Pubblicato in: Journal of Production Engineering, Numero Vol. 19., No. 1., 2016, 2016, Pagina/e 99-102, ISSN 1821-4932
Editore: University of Novi Sad

Raktár-irányítási rendszerek hatékonyságnövelési lehetőségeinek vizsgálata / Examination of Efficiency Improvement Possibilities for Warehouse Management Systems

Autori: Péter Tamás, Béla Illés
Pubblicato in: Műszaki szemle, Numero No. 68 (2016), 2016, Pagina/e pp. 29-36., ISSN 1454-0746
Editore: Erdélyi Magyar Műszaki Tudományos Társaság – EMT / Hungarian Technical Scientific Society

New Challenges for Quality Assurance of Manufacturing Processes in Industry 4.0

Autori: Béla Illés, Péter Tamás, Péter Dobos, Róbert Skapinyecz
Pubblicato in: Solid State Phenomena, Numero 261, 2017, Pagina/e 481-486, ISSN 1662-9779
Editore: Scientific.net
DOI: 10.4028/www.scientific.net/ssp.261.481

Gyártási folyamatok minőségbiztosításának kihívásai a 4. Ipari forradalomban

Autori: Tamás Péter, Illés Béla, Dobos Péter, Skapinyecz Róbert
Pubblicato in: LOGISZTIKA - INFORMATIKA - MENEDZSMENT, Numero 2 : 1 (2017), 2017, Pagina/e pp. 21-31. , 10 p., ISSN 2498-9037
Editore: Budapest Business School

Logistic aspects of Industry 4.0

Autori: R Skapinyecz, B Illés, Á Bányai
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 448, 2018, Pagina/e 012014, ISSN 1757-899X
Editore: IOP Publishing Ltd
DOI: 10.1088/1757-899x/448/1/012014

Risk management in logistics networks: an overview of the field and some novel perspectives

Autori: Róbert, Skapinyecz ; Béla, Illés
Pubblicato in: ADVANCED LOGISTIC SYSTEMS: THEORY AND PRACTICE, Numero 11 : 1 (2018), 2018, Pagina/e pp. 41-52. , 12 p., ISSN 1789-2198
Editore: University of Miskolc

Effects of Logistic Processes to the Maintenance Time

Autori: Péter Telek
Pubblicato in: Research Papers Faculty of Materials Science and Technology Slovak University of Technology, Numero 26/42, 2018, Pagina/e 135-143, ISSN 1338-0532
Editore: Slovak University of Technology in Bratislava
DOI: 10.2478/rput-2018-0016

Process-based planning of material handling in manufacturing systems

Autori: Péter Telek
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 448, 2018, Pagina/e 012018, ISSN 1757-899X
Editore: IOP Publishing Ltd
DOI: 10.1088/1757-899x/448/1/012018

Complexity Analysis of Material Handling Design Processes

Autori: Péter, Telek ; Christian, Landschützer
Pubblicato in: ADVANCED LOGISTIC SYSTEMS: THEORY AND PRACTICE, Numero 11 : 1 (2017), 2017, Pagina/e pp. 61-76. , 16 p., ISSN 1789-2198
Editore: University of Miskolc

Optimization of In-Plant Production Supply with Black Hole Algorithm

Autori: Péter Veres, Tamás Bányai, Béla Illés
Pubblicato in: Solid State Phenomena, Numero 261, 2017, Pagina/e 503-508, ISSN 1662-9779
Editore: Scientific.net
DOI: 10.4028/www.scientific.net/ssp.261.503

Optimisation problems of networking manufacturing processes

Autori: Péter Veres, Tamás Bányai, Béla Illés
Pubblicato in: MATEC Web of Conferences, Numero 112, 2017, Pagina/e 06026, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201711206026

TOYOTA PRODUCTION SYSTEM IN MILKRUN BASED IN-PLANT SUPPLY

Autori: Vivien Mácsay, Tamás Bányai
Pubblicato in: Journal of Production Engineering, Numero 20/1, 2017, Pagina/e 141-146, ISSN 1821-4932
Editore: University of Novi Sad
DOI: 10.24867/jpe-2017-01-141

Sensor Networks for Smart Manufacturing Processes

Autori: József Konyha, Tamás Bányai
Pubblicato in: Solid State Phenomena, Numero 261, 2017, Pagina/e 456-462, ISSN 1662-9779
Editore: Scientific.net
DOI: 10.4028/www.scientific.net/ssp.261.456

Modelling of just-in-sequence supply of manufacturing processes

Autori: Tamás Bányai, Ágota Bányai
Pubblicato in: MATEC Web of Conferences, Numero 112, 2017, Pagina/e 06025, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201711206025

Optimization of Consignment-Store-Based Supply Chain with Black Hole Algorithm

Autori: Ágota Bányai, Tamás Bányai, Béla Illés
Pubblicato in: Complexity, Numero 2017, 2017, Pagina/e 1-12, ISSN 1076-2787
Editore: John Wiley & Sons Inc.
DOI: 10.1155/2017/6038973

Markov-Chain Simulation-Based Analysis of Human Resource Structure: How Staff Deployment and Staffing Affect Sustainable Human Resource Strategy

Autori: Tamás Bányai, Christian Landschützer, Ágota Bányai
Pubblicato in: Sustainability, Numero 10/10, 2018, Pagina/e 3692, ISSN 2071-1050
Editore: MDPI Open Access Publishing
DOI: 10.3390/su10103692

Last mile logistics: an integrated view

Autori: János Juhász, Tamás Bányai
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 448, 2018, Pagina/e 012026, ISSN 1757-899X
Editore: IOP Publishing Ltd
DOI: 10.1088/1757-899x/448/1/012026

Smart Scheduling: An Integrated First Mile and Last Mile Supply Approach

Autori: Tamás Bányai, Béla Illés, Ágota Bányai
Pubblicato in: Complexity, Numero 2018, 2018, Pagina/e 1-15, ISSN 1076-2787
Editore: John Wiley & Sons Inc.
DOI: 10.1155/2018/5180156

Real-Time Decision Making in First Mile and Last Mile Logistics: How Smart Scheduling Affects Energy Efficiency of Hyperconnected Supply Chain Solutions

Autori: Tamás Bányai
Pubblicato in: Energies, Numero 11/7, 2018, Pagina/e 1833, ISSN 1996-1073
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en11071833

Economic aspects of decision making in production processes with uncertain component quality

Autori: Tamás Bányai
Pubblicato in: Engineering Economics, Numero 30/1, 2019, ISSN 1392-2785
Editore: Kaunas University of Technology
DOI: 10.5755/j01.ee.30.1.19324

Optimization of Municipal Waste Collection Routing: Impact of Industry 4.0 Technologies on Environmental Awareness and Sustainability

Autori: Tamás Bányai, Péter Tamás, Béla Illés, Živilė Stankevičiūtė, Ágota Bányai
Pubblicato in: International Journal of Environmental Research and Public Health, Numero 16/4, 2019, Pagina/e 634, ISSN 1660-4601
Editore: mdpi
DOI: 10.3390/ijerph16040634

Smart Cyber-Physical Manufacturing: Extended and Real-Time Optimization of Logistics Resources in Matrix Production

Autori: Ágota Bányai, Béla Illés, Elke Glistau, Norge Isaias Coello Machado, Péter Tamás, Faiza Manzoor, Tamás Bányai
Pubblicato in: Applied Sciences, Numero 9/7, 2019, Pagina/e 1287, ISSN 2076-3417
Editore: mdpi
DOI: 10.3390/app9071287

Többszintű optimáló algoritmus alkalmazása

Autori: Kota, László ; Jármai, Károly
Pubblicato in: GÉP, Numero 69 : 2 (2018), 2018, Pagina/e pp. 32-35. , 4 p., ISSN 0016-8572
Editore: Gépipari Tudományos Egyesület

Az OZone program használata

Autori: Jármai, Károly ; Kota, László
Pubblicato in: MAGÉSZ ACÉLSZERKEZETEK, Numero 15 : 4 (2018), 2018, Pagina/e pp. 28-32. , 5 p., ISSN 1785-4822
Editore: Magyar Acélszerkezeti Szövetség

Az Open Journal Systems rendszer bemutatása

Autori: Jármai, Károly ; Kota, László
Pubblicato in: GÉP, Numero 67 : 3 (2016), 2016, Pagina/e pp. 18-22. , 5 p., ISSN 0016-8572
Editore: Gépipari Tudományos Egyesület

Effect of the Safety Stock on the Probability of Occurrence of the Stock Shortage

Autori: János Korponai, Ágota Bányainé Tóth, Béla Illés
Pubblicato in: Procedia Engineering, Numero 182, 2017, Pagina/e 335-341, ISSN 1877-7058
Editore: Elsevier
DOI: 10.1016/j.proeng.2017.03.106

The Effect of the Safety Stock on the Occurrence Probability of the Stock Shortage

Autori: János Korponai, Ágota Bányainé Tóth, Béla Illés
Pubblicato in: Management and Production Engineering Review, Numero 8/1, 2017, Pagina/e 69-77, ISSN 2082-1344
Editore: De Gruyter
DOI: 10.1515/mper-2017-0008

Context of the inventory management expenses in the case of planned shortages

Autori: János Korponai, Ágota Bányainé Tóth, Béla Illés
Pubblicato in: Engineering Management in Production and Services, Numero 9/1, 2017, Pagina/e 26-35, ISSN 2543-912X
Editore: De Gruyter
DOI: 10.1515/emj-2017-0003

Supply Chain Design of Manufacturing Processes with Blending Technologies

Autori: Ágota Bányainé Tóth, Béla Illés, Fabian Schenk
Pubblicato in: Solid State Phenomena, Numero 261, 2017, Pagina/e 509-515, ISSN 1662-9779
Editore: Scientific.net
DOI: 10.4028/www.scientific.net/ssp.261.509

Impact of Industry 4.0 on production logistics

Autori: G Nagy, B Illés, Á Bányai
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 448, 2018, Pagina/e 012013, ISSN 1757-899X
Editore: IOP Publishing Ltd
DOI: 10.1088/1757-899x/448/1/012013

The improvement of the efficiency of purchasing by networking operation

Autori: Gábor, Nagy ; Ágota, Bányai ; Béla, Illés
Pubblicato in: ADVANCED LOGISTIC SYSTEMS: THEORY AND PRACTICE, Numero 10 : 2 (2016), 2016, Pagina/e pp. 79-90. , 12 p., ISSN 1789-2198
Editore: University of Miskolc

Examining the Integration Possibilities for Lean Tools and Simulation Modeling

Autori: Péter Tamás, Béla Illés
Pubblicato in: Solid State Phenomena, Numero 261, 2017, Pagina/e 516-522, ISSN 1662-9779
Editore: Scientific.net
DOI: 10.4028/www.scientific.net/ssp.261.516

Innovative Business Model for Realization of Sustainable Supply Chain at the Outsourcing Examination of Logistics Services

Autori: Péter Tamás
Pubblicato in: Sustainability, Numero 10/1, 2018, Pagina/e 210, ISSN 2071-1050
Editore: MDPI Open Access Publishing
DOI: 10.3390/su10010210

Application possibilities of the Big Data concept in Industry 4.0

Autori: P Dobos, P Tamás, B Illés, R Balogh
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 448, 2018, Pagina/e 012011, ISSN 1757-899X
Editore: IOP Publishing
DOI: 10.1088/1757-899x/448/1/012011

APPLICATION OF A SIMULATION INVESTIGATIONAL METHOD FOR EFFICIENCY IMPROVEMENT OF SMED METHOD

Autori: Tamás Péter
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero 15 : 2 (2017), 2017, Pagina/e pp. 23-30., ISSN 1583-7904
Editore: Editura Politehnica

SELECTION OF OPTIMAL WAREHOUSE CAPACITY ENLARGMENT POSSIBILITY USING THE CHURCHMAN-ACKOFF WEIGHTING METHOD

Autori: Tamás, Péter
Pubblicato in: TRANSPORT & LOGISTICS: the International Journal, Numero 17 : 43 (2017), 2017, Pagina/e 50-58. , 9 p., ISSN 2406-1069
Editore: University of Belgrade,Technical University of Košice

LEAN ESZKÖZÖK HATÉKONYSÁGNÖVELÉSE SZIMULÁCIÓS MODELLEZÉS FELHASZNÁLÁSÁVAL

Autori: Tamás Péter
Pubblicato in: LOGISZTIKA - INFORMATIKA - MENEDZSMENT , Numero 2 : 1 (2017), 2017, Pagina/e pp. 61-70. , 10 p., ISSN 2498-9037
Editore: Budapest Business School

SMED MÓDSZER HATÉKONYSÁGNÖVELÉSE SZIMULÁCIÓS VIZSGÁLATI MÓDSZER ALKALMAZÁSÁVAL

Autori: Tamás Péter
Pubblicato in: LOGISZTIKA-INFORMATIKA-MENEDZSMENT, Numero 17 : 43 (2017), 2017, Pagina/e pp. 57-63., ISSN 2498-9037
Editore: Budapest Business School

Examination of improvement possibilities in warehouse management systems

Autori: Szabolcs, Szentesi ; Dr. Péter, Tamás ; Dr. Béla, Illés
Pubblicato in: TRANSPORT & LOGISTICS: the International Journal, Numero 17 : 43 (2017), 2017, Pagina/e pp. 57-63., ISSN 2406-1069
Editore: University of Belgrade,Technical University of Košice

NOVEL TRENDS IN IMPROVEMENT OF WAREHOUSE MANAGEMENT SYSTEMS FOR MANFACTURING COMPANIES

Autori: Péter, Tamás ; Béla, Illés
Pubblicato in: Academic Journal of Manufacturing Engineering, Numero 15 : 3 (2017), 2017, Pagina/e pp. 23-28. , 6 p., ISSN 1583-7904
Editore: Editura Politehnica

Novel trends in improvement of warehouse management systems for manfacturing companies

Autori: Szabolcs, Szentesi ; Péter, Tamás ; Béla, Illés
Pubblicato in: ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, Numero 16 : 1 (2018), 2018, Pagina/e pp. 33-37. , 5 p., ISSN 1583-7904
Editore: Editura Politehnica

Collaborating robots in Industry 4.0 conception

Autori: R Benotsmane, L Dudás, Gy Kovács
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 448, 2018, Pagina/e 012023, ISSN 1757-899X
Editore: IOP Publishing
DOI: 10.1088/1757-899x/448/1/012023

NEW LOGISTICS AND PRODUCTION TRENDS AS THE EFFECT OF GLOBAL ECONOMY CHANGES

Autori: Gyorgy Kovacs, Sebastian Kot
Pubblicato in: Polish Journal of Management Studies, Numero 14/2, 2016, Pagina/e 115-126, ISSN 2081-7452
Editore: Czestochowa University of Technology
DOI: 10.17512/pjms.2016.14.2.11

LOGISTICS AND PRODUCTION PROCESSES TODAY AND TOMORROW

Autori: György Kovács
Pubblicato in: Acta logistica, Numero 3/4, 2016, Pagina/e 1-5, ISSN 1339-5629
Editore: 4S go, s.r.o.
DOI: 10.22306/al.v3i4.71

GLOBAL PRODUCTION TENDENCIES – LEAN MANUFACTURING PHILOSOPHY

Autori: György Kovács
Pubblicato in: Journal of Production Engineering, Numero 20/1, 2017, Pagina/e 137-140, ISSN 1821-4932
Editore: University of Novi Sad
DOI: 10.24867/jpe-2017-01-137

Development of performance evaluation software for road freight transport activity

Autori: Kovács, György
Pubblicato in: POLISH JOURNAL OF MANAGEMENT STUDIES, Numero 15 : 1, 2017, Pagina/e pp. 121-134. , 14 p., ISSN 2081-7452
Editore: Czestochowa University of Technology

OPTIMIZATION METHOD AND SOFTWARE FOR FUEL COST REDUCTION IN CASE OF ROAD TRANSPORT ACTIVITY

Autori: György Kovács
Pubblicato in: Acta Polytechnica, Numero 57/3, 2017, Pagina/e 201-208, ISSN 1210-2709
Editore: Czech Technical University, Publishing House
DOI: 10.14311/ap.2017.57.0201

GLOBAL ECONOMIC CHANGES, OPTIMIZATION OF VIRTUAL ENTERPRISES - SOFTWARE DEVELOPMENT

Autori: György Kovács
Pubblicato in: Polish Journal of Management Studies, Numero 15/2, 2017, Pagina/e 125-131, ISSN 2081-7452
Editore: Czestochowa University of Technology
DOI: 10.17512/pjms.2017.15.2.11

Planning of Optimal Fuel Supply of International Transport Activity

Autori: György Kovács, Miklós Gubán
Pubblicato in: Periodica Polytechnica Transportation Engineering, Numero 45/4, 2017, Pagina/e 186, ISSN 0303-7800
Editore: Budapesti Muszaki es Gazdasagtudomanyi Egyetem/Budapest University of Technology and Economics
DOI: 10.3311/pptr.10843

First Cost Calculation Methods for Road Freight Transport Activity

Autori: György Kovács
Pubblicato in: Transport and Telecommunication Journal, Numero 18/2, 2017, Pagina/e 107-117, ISSN 1407-6179
Editore: Transport and Telecommunication Institute, Lomonosova 1, Riga, LV-1019, Latvia
DOI: 10.1515/ttj-2017-0010

Methods for Efficiency Improvement of Production and Logistic Processes

Autori: György Kovács
Pubblicato in: Research Papers Faculty of Materials Science and Technology Slovak University of Technology, Numero 26/42, 2018, Pagina/e 55-61, ISSN 1338-0532
Editore: SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA
DOI: 10.2478/rput-2018-0006

Development of an Optimization Method and Software for Optimizing Global Supply Chains for Increased Efficiency, Competitiveness, and Sustainability

Autori: György Kovács, Béla Illés
Pubblicato in: Sustainability, Numero 11/6, 2019, Pagina/e 1610, ISSN 2071-1050
Editore: MDPI Open Access Publishing
DOI: 10.3390/su11061610

Logisztika és digitalizálás

Autori: Illés Béla
Pubblicato in: Logisztikai Évkönyv, Numero 2017, 2017, Pagina/e pp. 30-36, ISSN 1218-3849
Editore: Magyar Logisztikai Egyesület

COOPERATION IN LOGISTICS TECHNOLOGY RESEARCH: HOW TWINNING PROJECT AFFECTS R+D IN THE FIELD OF LOGISTIC SYSTEMS AND NETWORKS

Autori: Bányai Tamás, Illés Béla, Christian Landschützer, Fabian Schenk, Flavien Massi
Pubblicato in: Advanced Logistic Systems – Theory and Practice, Numero 12(1), 2018, Pagina/e 61-76, ISSN 1789-2198
Editore: Miskolc University Press

ARTIFICIAL INTELLIGENCE IN LOGISTICS APPLICATIONS AND ALGORITHMS

Autori: LÁSZLÓ KOTA
Pubblicato in: Advanced Logistic Systems – Theory and Practice, Numero 12(1), 2018, Pagina/e 47-60, ISSN 1789-2198
Editore: Miskolc University Press

THE CONCEPT OF AUTONOMOUS SYSTEMS IN INDUSTRY 4.0

Autori: RABAB BENOTSMANE, LÁSZLÓ DUDÁS, GYÖRGY KOVÁCS
Pubblicato in: Advanced Logistic Systems – Theory and Practice, Numero 12(1), 2018, Pagina/e 77-87, ISSN 1789-2198
Editore: Miskolc University Press

Material handling machines and systems – UMi-TWINN project contribution

Autori: Péter Telek; Béla Illés; Christian Landschützer; Fabian Schenk; Flavien Massi
Pubblicato in: Advanced Logistic Systems – Theory and Practice, Numero 12(1), 2018, Pagina/e 7-20, ISSN 1789-2198
Editore: Miskolc University Press

Introduction of Demo3D into the scientific education of material handling

Autori: Péter Telek; Wolfgang Trummer
Pubblicato in: Advanced Logistic Systems – Theory and Practice, Numero 12(1), 2018, Pagina/e 61-76, ISSN 1789-2198
Editore: Miskolc University Press

Application of Value Stream Mapping at Flexible Manufacturing Systems

Autori: Péter Tamás
Pubblicato in: Key Engineering Materials, Numero 686, 2016, Pagina/e 168-173, ISSN 1662-9795
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.686.168

Decision method for optimal selection of warehouse material handling strategies by production companies

Autori: P Dobos, P Tamás and B Illés
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero Vol. 161 (2016), 2016, Pagina/e pp. 1-7., ISSN 1757-899X
Editore: IOP Publishing
DOI: 10.1088/1757-899X/161/1/012100

Waste reduction possibilities for manufacturing systems in the industry 4.0

Autori: P Tamás, B Illés and P Dobos
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero Vol. 161 (2016), 2016, Pagina/e pp. 1-8., ISSN 1757-899X
Editore: IOP Publishing
DOI: 10.1088/1757-899X/161/1/012074

Sensibility analysis of the planned availability period and of the impact of the cost factors on total costs

Autori: János Korponai, Ágota Bányai, Béla Illés
Pubblicato in: Advanced Logistic Systems: Theory and Practice, Numero Vol 10/1 (2016), 2016, Pagina/e pp. 13-28., ISSN 1789-2198
Editore: University of Miskolc

Material flow relations in the design process of materials handling

Autori: Péter Telek
Pubblicato in: Advanced Logistic Systems: Theory and Practice, Numero Vol. 10/1 (2016), 2016, Pagina/e pp. 53-64., ISSN 1789-2198
Editore: University of Miskolc

Supply chain agility in humanitarian logistics

Autori: Tamás Bányai
Pubblicato in: Advanced Logistic Systems: Theory and Practice, Numero Vol. 10/1 (2016), 2016, Pagina/e pp. 75-81., ISSN 1789-2198
Editore: University of Miskolc

Approach to accelerate algorithms to solve logistic problems with GPGPU

Autori: József Konyha, Tamás Bányai
Pubblicato in: Advanced Logistic Systems: Theory and Practice, Numero Vol. 10/2 (2016), 2016, Pagina/e pp. 5-10., ISSN 1789-2198
Editore: University of Miskolc

Improvement possibilities for the method of value stream mapping

Autori: Szabolcs Szentesi, Péter Tamás, Béla Illés
Pubblicato in: Advanced Logistic Systems: Theory and Practice, Numero Vol. 10/2 (2016), 2016, Pagina/e pp. 39-48., ISSN 1789-2198
Editore: University of Miskolc

Sourcing process improvement with six sigma methodology

Autori: Adél Anett Szabó, Ágota Bányai
Pubblicato in: Advanced Logistic Systems: Theory and Practice, Numero Vol. 10/2 (2016), 2016, Pagina/e pp. 59-64., ISSN 1789-2198
Editore: University of Miskolc

Simulation method for design and analysis of logistical processes

Autori: György Kovács
Pubblicato in: Advanced Logistic Systems: Theory and Practice, Numero Vol. 10/2 (2016), 2016, Pagina/e pp. 65-70., ISSN 1789-2198
Editore: University of Miskolc

Computer algorithm for determination of material flow relations

Autori: Péter Telek
Pubblicato in: Advanced Logistic Systems: Theory and Practice, Numero Vol. 10/2 (2016), 2016, Pagina/e pp. 71-78., ISSN 1789-2198
Editore: University of Miskolc

Development of courier companies as for the e-commerce market service

Autori: Gábor Nagy, Ágota Bányai, Béla Illés
Pubblicato in: Advanced Logistic Systems: Theory and Practice, Numero Vol. 10/2 (2016), 2016, Pagina/e pp. 79-90., ISSN 1789-2198
Editore: University of Miskolc

Optimisation of knapsack problem with matlab, based on harmony search algorithm

Autori: Bányai Tamás, Veres Péter
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 7 No.1, 2013, Pagina/e pp. 13-20, ISSN 1789-2198
Editore: University of Miskolc

Optimisation of production depth

Autori: Bányai Tamás, Veres Péter
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 7 No.2, 2013, Pagina/e pp. 85-94, ISSN 1789-2198
Editore: University of Miskolc

Build to sequence supply

Autori: Bányai Tamás
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 7 No.2, 2013, Pagina/e pp. 35-40, ISSN 1789-2198
Editore: University of Miskolc

How to support purchasing with ERP systems as integrator of novel logistic tools?

Autori: Bányai Ágota
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 7 No.1, 2013, Pagina/e pp. 7-12, ISSN 1789-2198
Editore: University of Miskolc

Complex design of integrated material flow systems

Autori: Telek Péter, Bányai Tamás
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 7 No.2, 2013, Pagina/e pp. 105-110, ISSN 1789-2198
Editore: University of Miskolc

Just in sequence supply with multilevel cross docking

Autori: Bányai Ágota
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 7 No.2, 2013, Pagina/e pp. 5-12, ISSN 1789-2198
Editore: University of Miskolc

Equipment preselection for integrated design of materials handling systems

Autori: Telek Péter
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 7 No.2, 2013, Pagina/e pp. 57-66, ISSN 1789-2198
Editore: University of Miskolc

Development of e-learning curricula in the field of logistics

Autori: Bányai Ágota, Borodavko Beáta, Illés Béla
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 7 No.2, 2013, Pagina/e pp. 103-108, ISSN 1789-2198
Editore: University of Miskolc

Mathematical Modeling of the Unit Load Formation

Autori: Béla Illés, Gabriella Bognár
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2013, Pagina/e 358-365, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.309.358

The alteration of the Hungarian toll payment system in 2013, activity support with the application of a fleet management system

Autori: Kovács György, Zakar katalin
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 7 No.1, 2013, Pagina/e pp. 111-116, ISSN 1789-2198
Editore: University of Miskolc

CAN Message Filter Algorithms for Remote Diagnostics of Vehicles

Autori: Attila Trohák, Béla Illés, Zoltán Biró
Pubblicato in: Applied Mechanics and Materials, Numero 16627482, 2013, Pagina/e 213-220, ISSN 1662-7482
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/AMM.309.213

On the Multi-Level Unit Load Formation Model

Autori: Béla Illés, Gabriella Bognár
Pubblicato in: Key Engineering Materials, Numero 16629795, 2013, Pagina/e 519-526, ISSN 1662-9795
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.581.519

Sensitivity Analysis of Road Transport by Sensibility of Production-Function

Autori: Béla Illés, János Németh
Pubblicato in: Key Engineering Materials, Numero 16629795, 2013, Pagina/e 539-546, ISSN 1662-9795
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.581.539

Mathematical Model for the Homogenization of Unit Load Formation

Autori: Béla Illés, Gabriella Bognár
Pubblicato in: Journal of Applied Mathematics and Physics, Numero 23274352, 2014, Pagina/e 14-20, ISSN 2327-4352
Editore: Scientific Research
DOI: 10.4236/jamp.2014.21003

Introducing a Risk-Management Concept for Holonic Manufacturing Supply Chains

Autori: Róbert Skapinyecz, Béla Illés
Pubblicato in: Key Engineering Materials, Numero 16629795, 2013, Pagina/e 547-553, ISSN 1662-9795
Editore: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.581.547

Heuristic Supply Chain Optimization of Networked Maintenance Companies

Autori: Tamás Bányai, Péter Veres, Béla Illés
Pubblicato in: Procedia Engineering, Numero 18777058, 2015, Pagina/e 46-55, ISSN 1877-7058
Editore: Elsevier
DOI: 10.1016/j.proeng.2015.01.341

Cloud Logisztics

Autori: Ágota Bányai
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 8 No.1, 2014, Pagina/e pp. 11-16, ISSN 1789-2198
Editore: University of Miskolc

Application of device preselection for discontinuous unit handling

Autori: Péter Telek
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 8 No.1, 2014, Pagina/e pp. 93-102, ISSN 1789-2198
Editore: University of Miskolc

Examination of scheduling methods for production systems

Autori: Zoltán Varga, Pál Simon
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 8 No.1, 2014, Pagina/e pp. 111-120, ISSN 1789-2198
Editore: University of Miskolc

GPRS based remote monitoring system to support logistic decisions

Autori: József Konyha, Tamás Bányai
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 8 No.1, 2014, Pagina/e pp. 67-76, ISSN 1789-2198
Editore: University of Miskolc

The effect of different packaging concepts on logistical costs and stocks

Autori: Korponai János, Bányai Ágota, Illés Béla
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 8 No.2, 2014, Pagina/e pp. 35-50, ISSN 1789-2198
Editore: University of Miskolc

Serving times of discontinuous material handling machines

Autori: Péter Telek
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 8 No.2, 2014, Pagina/e pp. 87-96, ISSN 1789-2198
Editore: University of Miskolc

Process-oriented risk assessment in integrated logistics networks: an AHP approach

Autori: Róbert Skapinyecz, Béla Illés
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 9 No.1, 2015, Pagina/e pp. 61-72, ISSN 1789-2198
Editore: University of Miskolc

Conception for selection of adequate warehouse material handling strategy

Autori: Dobos Péter, Illés Béla, Tamás Péter
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 9 No.1, 2015, Pagina/e pp. 53-59, ISSN 1789-2198
Editore: University of Miskolc

The aspects of logistics development of air transport in Hungarian airports

Autori: Varga Zoltán, Mang Béla
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 9 No.1, 2015, Pagina/e pp. 41-51, ISSN 1789-2198
Editore: University of Miskolc

The effect of the supply accuracy and the demand-changes on the inventories and on the costs

Autori: János Korponai, Ágota Bányai, Béla Illés
Pubblicato in: Advanced Logistic Systems: Theory and Practice , Numero Vol. 9 No.1, 2015, Pagina/e pp. 5-16, ISSN 1789-2198
Editore: University of Miskolc

Mathematical model for optimal fuel supply of international transport activity

Autori: Miklós Gubán, György Kovács
Pubblicato in: Annals of Faculty Engineering Hunedoara – International Journal of Engineering, Numero Tome XIV (2016), Fascicule 3 (August), 2016, Pagina/e 29.-34., ISSN 1584-2665
Editore: University Politehnica Timisoara, Faculty of Engineering Hunedoara

Az igényváltozások hatása a vásárolt alkatrész készletekre és a költségekre

Autori: Korponai János, Bányainé Tóth Ágota, Illés Béla
Pubblicato in: Repüléstudományi közlemények, Numero XXVIII./2. (2016), 2017, Pagina/e 15-32, ISSN 1789-770X
Editore: NKE KRI

Examination of improvement possibilities in warehouse management systems

Autori: Tamas, Péter ; Dobos, Péter ; Illés, Béla
Pubblicato in: LOGISTICS JOURNAL, Numero Vol. 2017., 2017, Pagina/e 1-6. , 6 p., ISSN 1860-5923
Editore: Wissenschaftliche Gesellschaft für Technische Logistik (WGTL)
DOI: 10.2195/lj_notrev_tamas_en_201709_01

Gyártórendszerek folyamatfejlesztési lehetőségei a negyedik ipari forradalomban/Process improvement possibilities for manufacturing systems in the industry 4.0

Autori: Tamás Péter, Illés Béla
Pubblicato in: Műszaki Szemle, Numero No. 67. (2016), 2016, Pagina/e pp. 41-48., ISSN 1454-0746
Editore: Hungarian Technical Scientific Society of Transylvania

New supply chain concepts, flexibility as a key parameter of agile supply chains

Autori: Zoltán Varga, György Kovács
Pubblicato in: Acta Technología, International Scientific Journal about Technologies, Numero Vol. 2, Numero 4, 2016, 2016, Pagina/e pp. 1-5., ISSN 2453-675X
Editore: 4S go, Ltd.

A Lean ellátási láncok jellemzőinek bemutatása

Autori: Kovács György
Pubblicato in: Műszaki Szemle, Numero VOL. 68, 2016, 2016, Pagina/e pp. 8-12., ISSN 1454-0746
Editore: Hungarian Technical Scientific Society of Transylvania

Just-in-sequence ellátási stratégiák

Autori: Bányai Tamás
Pubblicato in: Multidiszciplináris Tudományok: A Miskolci Egyetem közleménye, Numero 20629737, 2013, Pagina/e pp. 141-152, ISSN 2062-9737
Editore: University of Miskolc

Közúti és légi kombinált fuvarozás közötti választás a földrajzi elhelyezkedés és az átfutási idő függvényében

Autori: Korponai János, Bányai Ágota, Illés Béla
Pubblicato in: Repüléstudományi Közlemények, Numero 14170604, 2015, Pagina/e pp. 140-147, ISSN 1417-0604
Editore: National University of Public Service

The concept of a virtual logistics center for a Hungarian Region

Autori: Tamás Péter, Illés Béla
Pubblicato in: Journal of Production Engineering , Numero 18214932, 2015, Pagina/e pp. 107-110, ISSN 1821-4932
Editore: University of Novi Sad

Simulation examination of logistics systems in the automotive industry

Autori: Tamás Péter, Illés Béla
Pubblicato in: Journal of Production Engineering , Numero 18214932, 2015, Pagina/e pp. 69-72, ISSN 1821-4932
Editore: University of Novi Sad

Hálózatszerű szolgáltató rendszer tervezése

Autori: Péter Veres, Tamás Bányai, Béla Illés
Pubblicato in: Repüléstudományi Közlemények, Numero 14170604, 2015, Pagina/e pp. 143-153, ISSN 1417-0604
Editore: National University of Public Service

Advanced Materials Handling Processes and Devices in the Automotive Industry

Autori: Péter Telek, Tamás Bányai
Pubblicato in: Vehicle and Automotive Engineering 2, 2018, Pagina/e 315-328, ISBN 978-3-319-75676-9
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-75677-6_26

Milkrun Based In-plant Supply – An Automotive Approach

Autori: Tamás Bányai, Péter Telek, Christian Landschützer
Pubblicato in: Vehicle and Automotive Engineering 2, 2018, Pagina/e 170-185, ISBN 978-3-319-75676-9
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-75677-6_14

What Industry 4.0 Means for Just-In-Sequence Supply in Automotive Industry?

Autori: János Juhász, Tamás Bányai
Pubblicato in: Vehicle and Automotive Engineering 2, 2018, Pagina/e 226-240, ISBN 978-3-319-75676-9
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-75677-6_19

Application of Multilevel Optimization Algorithms

Autori: László Kota, Károly Jármai
Pubblicato in: Advances in Structural and Multidisciplinary Optimization, 2018, Pagina/e 710-715, ISBN 978-3-319-67987-7
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-67988-4_54

Analysis of Supply Chain Efficiency in Blending Technologies

Autori: Gábor Nagy, Ágota Bányainé Tóth, Béla Illés, Elke Glistau
Pubblicato in: Vehicle and Automotive Engineering 2, 2018, Pagina/e 280-291, ISBN 978-3-319-75676-9
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-75677-6_23

Logistics and Digitization

Autori: Béla Illés, Attila K. Varga, László Czap
Pubblicato in: Vehicle and Automotive Engineering 2, 2018, Pagina/e 220-225, ISBN 978-3-319-75676-9
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-75677-6_18

Supply Chain Optimization in Automotive Industry: A Comparative Analysis of Evolutionary and Swarming Heuristics

Autori: Péter Veres, Béla Illés, Christian Landschützer
Pubblicato in: Vehicle and Automotive Engineering 2, 2018, Pagina/e 666-676, ISBN 978-3-319-75676-9
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-75677-6_57

Logisztikai trendek a globalizáció tükrében

Autori: Illés Béla
Pubblicato in: Báthory – Brassai Nemzetközi Tudományos Konferencia, 2013, Pagina/e pp. 80-92
Editore: Tibor Tuzson

Presenting a Logistics Oriented Research Project in the Field of E-marketplace Integrated Virtual Enterprises

Autori: Róbert Skapinyecz, Béla Illés
Pubblicato in: Applied Information Science, Engineering and Technology, 2014, Pagina/e 197-211, ISBN 978-3-319-01919-2
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-01919-2_11

Logisztikai hálózatok rizikótényezőinek kezelése

Autori: Skapinyecz Róbert
Pubblicato in: 2018
Editore: University of Miskolc

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica