Development of high strength hot- and cold-rolled steel strip with extended production applications

Projektinformationen

ID Finanzhilfevereinbarung: 7210-EC-404

Projekt abgeschlossen

Startdatum 1 Juli 1994

Enddatum 30 Juni 1998

Finanziert unter

• Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Gesamtkosten € 338 500,00

EU-Beitrag € 203 100,00

Koordiniert durch

CENTRO SVILUPPO MATERIALI SPA
Italy

Ziel

The aim of this project is to develop concepts allowing the increased requirements for steel strip products to be achieved using the smallest possible number of steel grades. The problem could be solved through variations of the heat treatment and cooling parameters during hot rolling and annealing. Laboratory experiments in combination with modelling procedures hold out the promise of effectively meeting the aims of this project. Focusing on a reduced number of steel grades would provide effective logistic and economic advantages.

Programm/Programme

• ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Thema/Themen

• D3 - Physical metallurgy of rolling and finishing

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

Data not available

Koordinator

CENTRO SVILUPPO MATERIALI SPA

• EU-Beitrag: Keine Daten
• Adresse: Via Di Castel Romano 100 ; ROMA ; Italien
• Gesamtkosten: Keine Daten