Increasing the quality and rate of MultilayER packaging recycLINg waste

Informazioni relative al progetto

MERLIN

ID dell’accordo di sovvenzione: 101003883

DOI

10.3030/101003883

Progetto chiuso

Data della firma CE 25 Maggio 2021

Data di avvio 1 Giugno 2021

Data di completamento 30 Novembre 2024

Finanziato da

• SOCIETAL CHALLENGES - Climate action, Environment, Resource Efficiency and Raw Materials

Costo totale

€ 4 926 225,00

Contributo UE

€ 4 926 225,00

Coordinato da

INSTITUTO TECNOLOGICO DEL EMBALAJE, TRANSPORTE Y LOGISTICA
Spain

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (12)

D5.5 Policy recommendations toolbox for policymakers (preliminary)

D55Policy recommendations toolbox for policymakers Task 55

D7.1 Communication Plan

D71Communication Plan Task 71

D5.4 Preliminary Safety study report with baseline scenario and final report, including Safety by Process Design (SPD)

D54Preliminary Safety study report with baseline scenario and final report including Safety by Process Design SPD Task 54

D4.4 Evaluation of the circularity of the materials developed

D4.4Evaluation of the circularity of the materials developed. (Task 4.4)

D7.4 Final Plan for the Dissemination of the project results and Replicability Action

D7.4Final Plan for the Dissemination of the project results and Replicability Action. (Task 7.3.2)

D5.7 Policy recommendations toolbox for policymarkers (final)

D5.7 Policy recommendations toolbox for policymakers (final) (Task 5.5)

D6.2 Guidelines on increasing the recyclability and circularity of plastic packaging: Learnings from collected good practices.

D6.2Guidelines on increasing the recyclability and circularity of plastic packaging: Learnings from collected good practices. (Task 6.2.2)

D5.10 S-LCA final report. Social recommendation resulting from S-LCA analysis
D5.6 Regulatory report to foster standardization frameworks

D5.6Regulatory report to foster standardization frameworks. (Task 5.5)

D6.1 Stakeholder engagement plan

D61Stakeholder engagement plan Task 613

D5.11 Safety study final report, including Safety by Process Design (SPD)
D5.3 Preliminary S-LCA report (social study) with baseline scenario and final report. Social recommendation resulting from S-LCA analysis.

D53Preliminary SLCA report social study with baseline scenario and final report Social recommendation resulting from SLCA analysis Task 53

Demonstrators, pilots, prototypes (2)

D6.4 Development and Integration of the QR code into the Merlin project packaging

D6.4Development and Integration of the QR code into the Merlin project packaging. (Task 6.4)

D6.3 Decision Support System for multi-layer packaging recycling

D6.3Decision Support System for multi-layer packaging recycling. (Task 6.3)

Pubblicazioni

Peer reviewed articles (6)

Effect of diethyl fumarate molecules grafting and/or plasticizing on surface tension and mechanical properties of recycled LDPE

Autori: POLONI Mélissa, PIETRI Thomas, GIRARDOT Cecile
Pubblicato in: ACS Polymers Au, 2025, ISSN 2694-2453
Editore: ACS Publications

Recycling of Multilayer Flexible Packaging Waste Through Delamination with Recoverable Switchable Hydrophilicity Solvents

Autori: Roberta Mastroddi, Chiara Samorì, Martina Vagnoni, Chiara Gualandi, Paola Galletti, Emilio Tagliavini
Pubblicato in: Separations, Numero 12, 2025, Pagina/e 45, ISSN 2297-8739
Editore: MDPI AG
DOI: 10.3390/separations12020045

Sustainability Assessment of Employing Chemical Recycling Technologies on Multilayer Packaging Waste

Autori: Dominik Jasiński, Ilija Djekic, Luka Dobrović
Pubblicato in: Sustainability, Numero 17, 2025, Pagina/e 556, ISSN 2071-1050
Editore: MDPI Open Access Publishing
DOI: 10.3390/su17020556

Recycling of multilayer packaging waste with sustainable solvents

Autori: Chiara Samorì, Walter Pitacco, Martina Vagnoni, Emilio Catelli, Thomas Colloricchio, Chiara Gualandi, Luciana Mantovani, Alessio Mezzi, Giorgia Sciutto, Paola Galletti
Pubblicato in: Resources, Conservation and Recycling, 2023, ISSN 0921-3449
Editore: Elsevier BV
DOI: 10.1016/j.resconrec.2022.106832

rPET valorization with biobased chain extender

Autori: POLONI Mélissa,PIETRI Thomas, GIRARDOT Cecile
Pubblicato in: ACS Polymers Au, 2025, ISSN 2694-2453
Editore: ACS Publications

Recycling of multilayer packaging waste with switchable anionic surfactants

Autori: Martina Vagnoni, Walter Pitacco, Vincenzo Arpaia, Emilio Catelli, Chiara Gualandi, Roberta Mastroddi, Alessio Mezzi, Chiara Samorì, Giorgia Sciutto, Emilio Tagliavini, Paola Galletti
Pubblicato in: Resources, Conservation and Recycling, Numero Volume 198, November 2023, 107141, 2023, ISSN 0921-3449
Editore: Elsevier BV
DOI: 10.1016/j.resconrec.2023.107141

Conference proceedings (3)

Development of New Processes for the Sorting, Delamination and Recycling of Multilayer Plastic Packaging Waste

Autori: Laurent Philippet; José L. Angulo; Victor Chamizo; Ana M. Lopez-Sabiron; Francisco V. Sanchez-Correa; José L. Diéguez-Garcia; Madeira Scauri; Marco de la Feld; Simona Mincione; Giuseppe Salvio; Paola Galletti; Chiara Samorì; Emilio Tagliavini; Martina Vagnoni; Patricio Alemany; Javier Curado; Guillermo Flores
Pubblicato in: Numero 1, 2022
Editore: Zenodo
DOI: 10.5281/zenodo.7534286

IONIQA’s PET depolymerisation story: from bottles to Multi-Layer Trays and beyond

Autori: Katarina Babić, Marianne Gravendeel
Pubblicato in: 2024
Editore: Book of IAPRI 2024

MERLIN Project's Innovative Approach to Recycling Multilayer Packaging in Europe

Autori: Francisco Sánchez, Félix González, César Aliaga
Pubblicato in: 2024
Editore: 4th IAPRI World Packaging Conference 2024

Non-peer reviewed articles (1)

Tecnología hiperespectral y robótica inteligente para la clasificación y separación de residuos de envase multicapa

Autori: IRIS Technology Solutions, Rovimática,PreZero
Pubblicato in: RETEMA, 2023, ISSN 1130-9881
Editore: RETEMA