CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
Final report on the dissemination and communication strategy.
Data Management Plan (se abrirá en una nueva ventana)This deliverable presents the envisioned Data Management Plan.
Report on requirements and specification definition on communication and connectivity technologies (se abrirá en una nueva ventana)The report will specify the derived technical requirements and specification together with the targeted KPIs referring to defined baselines. In addition, the report will describe the requirements for cloud- and edge-based communication and connectivity for the foreseen demonstrators in SC5.
Report on Requirements for Simulation of AI-shared mobility system as a digital twin (se abrirá en una nueva ventana)The report will outline the specified SC1 use cases together with the targeted scenarios and KPIs referring to defined baselines for MAGIC Approach and MAGICFLOW. In addition, the report will describe the requirements for virtualisation and simulation for cloud- and edge-based environment perception and vehicle ADAS functionalities together with the communication in between all the required sensors.
Report on project clustering and synergies (se abrirá en una nueva ventana)Report describing cooperation with other projects and relations to light-house initiatives.
Report on requirements and specifications for the robust propulsion and energy storage system (se abrirá en una nueva ventana)The report will describe the functions and specifications defined for the powertrain and energy storage demonstrators including hardware and control and diagnostics algorithms.
Final report on Standards, Certification and Ethical aspects (se abrirá en una nueva ventana)The report is a concluding update of D7.7 and will describe the ongoing evolution and progress in the standardization landscape and the partners involvement during the project, and provide some outlook on the longer-term commitment of the most active partners in contributing to and influencing standardization.
Report on Ethics and Environmental Requirements (se abrirá en una nueva ventana)The report provides a discussion of the ethical, environmental and gender/diversity aspects that have been considered or added while working out the detailed use cases and their requirements. The report will elaborate on all these added requirements and show how they are necessary for achieving the Green Deal, Trustworthy AI, and an inclusive society. If some requirements were considered but not added, this report will give the reasoning behind this decision, state the potential impact, and discuss how these requirements should be considered in future developments.
2nd Dissemination and communication report (se abrirá en una nueva ventana)Report on the dissemination and communication strategy, the second year.
Report on simulation architectures for testing, verification, and validation of SC1 building bricks (se abrirá en una nueva ventana)The report will describe the specified simulation architectures specifying all relevant edge- and cloud-based environment perception and vehicle intelligence building blocks together with the communication architecture and their corresponding interfaces.
Initial Report on Standardization, Certification and Ethical aspects (se abrirá en una nueva ventana)The report will describe the existing and evolving international standardization landscape (ISO, IEC, CEN/CENELEC, ETSI and others) in the areas relevant for the highly automated, connected and shared mobility, the involvement of partners (as users, observers and active contributors), and the potential areas of interest for the work packages and use cases of AI4CSM. This will be supported by a survey among the consortium partners. The report will also cover ethical (based on EC and some national recommendations and guidelines) and potential certification aspects.
Project Handbook (se abrirá en una nueva ventana)This deliverable presents the procedures related to the project management and communication.
Report on Requirements and specifications for the AI based EV demonstrator (se abrirá en una nueva ventana)The report will detail the requirements for function and integration aspects of the intended demonstrators implementation into the demo car.
Report on SC1 use cases, scenarios, KPIs and requirements (se abrirá en una nueva ventana)The report will outline the specified SC1 use cases together with the targeted scenarios and validation criteria. In addition, the report will describe the requirements for cloud- and edge-based environment perception and vehicle intelligence functionalities together with the communication in between.
Broad Strategies for Stakeholder engagement & Initial dissemination and communication plan (se abrirá en una nueva ventana)Report on stakeholder identification and mapping, stakeholder engagement plan, Advisory Board set-up and activities, Plan for the initial dissemination and communication strategy.
1st Dissemination and communication report (se abrirá en una nueva ventana)Report on the dissemination and communication strategy, the first year.
Report on requirements and specifications of electronic component and systems for L3 driving and L1e vehicle (se abrirá en una nueva ventana)The report will collect high level and functional requirements of the electronic components and systems to be integrated on SC3 demonstrator.
Report on technical requirements and specifications for AI-enabled perception and sensors fusion systems and platforms and the definition of SC6 use cases (se abrirá en una nueva ventana)The report includes the technical requirements and specifications for AI-enabled perception and sensors fusion systems and platforms developed and used in SC6 and presents the specified use cases that are implemented in the project with the description of the scenarios and environment conditions for the demonstrators.
Report on AI4CSM Environmental and Technical Impact (se abrirá en una nueva ventana)Based on the requirements (D1.8), the system design (D2.9) and the evaluation results (WP6), this report will summarize the findings related to the ecological and societal impact of AI4CSM’s developments. The report will also showcase partners’ future strategies and identify open issues that could not be solved during AI4CSM.
AI4CSM validation demonstrators (se abrirá en una nueva ventana)This report represents the publishable version of D6.1. Any confidential information will be removed.
Report on System level design for the AI based EV demonstrator (se abrirá en una nueva ventana)The report will cover the detailed concept for integration of the intended functions in the demo vehicle.
The demonstrator showcasing the virtual simulation platform for Sensing and corresponding scenarios together with all the real environments.
Demo vehicle with integrated AI sensing, powertrain, and edge-cloud communication (se abrirá en una nueva ventana)The AI-supported hardware and functions (SiC powertrain with control, the edge-cloud communication, and the interior sensing) from SC4, SC5 and SC6 are integrated in the test car. The car modification is completed
800V 6-Phase GaN powertrain demonstrator with integrated diagnostics and control solutions (se abrirá en una nueva ventana)The deliverable consists of the 6-phase 3-level inverter with a GaN power-stage, gate drivers optimized for fast switching, and cognitive software for control and diagnostics. The inverter, as well as its associated electric motor, will be provided for integration into the validation testbench.
HW and SW demonstrator for smart connected mobility (se abrirá en una nueva ventana)Demonstrator showcasing the targeted use cases and corresponding scenarios together with the KPI evaluation within real environments.
Integrated prototype of fast, reliable and secure V2X communication system (se abrirá en una nueva ventana)System integration and use case description of the cognitive based V2X connectivity platform for combined connectivity, facilitating different transportation domains and smart mobility services.
Initial setup of HW and SW demonstrator for smart connected mobility (se abrirá en una nueva ventana)Initial version of demonstrator for commissioning and initial tests.
L1e vehicle prototype (se abrirá en una nueva ventana)The deliverable consists of the L1e vehicle prototype for the demonstration of multimodal CSM functionalities in the realistic MASA environment.
L3 autonomous vehicle prototype (se abrirá en una nueva ventana)The deliverable consists of the vehicle prototype for the demonstration of L3 autonomous driving functionalities in the realistic MASA environment.
Wireless charger with FOD system (se abrirá en una nueva ventana)A FOD sensing system will be built into the primary side of a wireless charger. The system will be used as demonstrator.
Integrated prototypes of perception systems and platforms for ECAS vehicles (se abrirá en una nueva ventana)Prototypes of AI-based perceptions systems – demonstrators for SC6 use-cases.
Project website, and communication channels (Social Media and others)
Project newsletter No. 2 (se abrirá en una nueva ventana)Report on recent news and activities from the project, the second year.
Project newsletter No. 1 (se abrirá en una nueva ventana)Report on recent news and activities from the project, the first year.
Project newsletter No. 3 (se abrirá en una nueva ventana)Report on recent news and activities from the project, the third year
Publicaciones
Autores:
Romana Blazevic, Omar Veledar, Michael Stolz, Georg Macher
Publicado en:
SAE International Journal of Connected and Automated Vehicles, Edición 8, 2024, ISSN 2574-0741
Editor:
SEA International
DOI:
10.4271/12-08-01-0007
Autores:
Aurimas Čerškus; Vygantas Ušinskis; Nikolaj Šešok; Igor Iljin; Vytautas Bučinskas
Publicado en:
Applied Sciences; Volume 13; Edición 9; Pages: 5371, Edición 6, 2023, ISSN 2076-3417
Editor:
MDPI
DOI:
10.3390/app13095371
Autores:
Vytautas Bucinskas; Andrius Dzedzickis; Mantas Makulavicius; Nikolaj Sesok; Inga Morkvenaite-Vilkonciene
Publicado en:
Coatings; Volume 12; Edición 11; Pages: 1785, Edición 2, 2022, ISSN 2079-6412
Editor:
MDPI
DOI:
10.3390/coatings12111785
Autores:
Lukas Zezula, Matus Kozovsky, Petr Blaha
Publicado en:
IEEE Transactions on Industrial Electronics, Edición 71, 2024, Página(s) 15001-15011, ISSN 0278-0046
Editor:
Institute of Electrical and Electronics Engineers
DOI:
10.1109/tie.2024.3363775
Autores:
Allan Tengg, Michael Stolz and Joachim Hillebrand
Publicado en:
Sensors 2022, 22(18), 2022, ISSN 1424-8220
Editor:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/s22186798
Autores:
Uwe Hentschel , Martin Helwig , Anja Winkler and Niels Modler
Publicado en:
World Electr. Veh. J, 2023, ISSN 2032-6653
Editor:
MDPI
DOI:
10.3390/wevj14090241
Autores:
Marcus Mayrhofer, Peter Filzmoser
Publicado en:
Econometrics and Statistics, 2023, ISSN 2452-3062
Editor:
Elsevier BV
DOI:
10.1016/j.ecosta.2023.04.003
Autores:
Ondrej Bartik
Publicado en:
IEEE Access, Edición 12, 2024, Página(s) 77764-77773, ISSN 2169-3536
Editor:
Institute of Electrical and Electronics Engineers Inc.
DOI:
10.1109/access.2024.3407850
Autores:
Vygantas Ušinskis, Mantas Makulavičius, Sigitas Perkevičius, Andrius Dzerdzickis, Vytautas Bučinskas
Publicado en:
Sensors, 2024, ISSN 1424-8220
Editor:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/s24113411
Autores:
Tadas Lenkutis, Darius Viržonis, Aurimas Čerškus, Andrius Dzedzickis, Nikolaj Šešok, Vytautas Bučinskas
Publicado en:
Sensors, Edición 2022, 22(3), 2022, ISSN 1424-8220
Editor:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/s22031195
Autores:
Martin Helwig, Yun Xu, Uwe Hentschel, Anja Winkler and Niels Modler
Publicado en:
Sensors, 2023, ISSN 1424-8220
Editor:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/s23239425
Autores:
Ovidiu Vermesan, Reiner John, Patrick Pype, Gerardo Daalderop, Kai Kriegel, Gerhard Mitic, Vincent Lorentz, Roy Bahr, Hans Erik Sand, Steffen Bockrath, Stefan Waldhör
Publicado en:
Frontiers in Future Transportation, Edición July 2021 | Volume 2 | Article 688482, 2021, ISSN 2673-5210
Editor:
https://www.frontiersin.org/
DOI:
10.3389/ffutr.2021.688482
Autores:
Edgars Lielamurs, Ibrahim Sayed, Andrejs Cvetkovs, Rihards Novickis, Anatolijs Zencovs, Maksis Celitans, Andis Bizuns, George Dimitrakopoulos, Jochen Koszescha, Kaspars Ozols
Publicado en:
Electronics, Edición 14, 2025, Página(s) 1375, ISSN 2079-9292
Editor:
MDPI AG
DOI:
10.3390/electronics14071375
Autores:
Uwe Hentschel, Fiete Labitzke, Martin Helwig, Anja Winkler and Niels Modler
Publicado en:
World Electr. Veh. J. 2022, 13(12), 241, 2022, ISSN 2032-6653
Editor:
MDPI
DOI:
10.3390/wevj13120241
Autores:
Marcus Mayrhofer, Una Radojičić, Peter Filzmoser
Publicado en:
Technometrics, 2025, Página(s) 1-15, ISSN 0040-1706
Editor:
American Statistical Association
DOI:
10.1080/00401706.2025.2475781
Autores:
Anja Dakić, Benjamin Rainer, Peter Priller, Guo Nan, Anamarija Momić, Xiaochun Ye, Thomas Zemen
Publicado en:
2024 IEEE Vehicular Networking Conference (VNC), 2024, Página(s) 9-16
Editor:
IEEE
DOI:
10.1109/vnc61989.2024.10575958
Autores:
Lukas Zezula; Petr Blaha
Publicado en:
IECON 2023: 49th Annual Conference of the IEEE Industrial Electronics Society, Edición 2023, 2023, ISBN 979-8-3503-3182-0
Editor:
IEEE
DOI:
10.1109/iecon51785.2023.10312226
Autores:
Jan Ruh, Wilfried Steiner, Gerhard Fohler
Publicado en:
2023
Editor:
IEEE
DOI:
10.1109/dsn-s58398.2023.00027
Autores:
G. Brilli, G. Valente, A. Capotondi, P. Burgio, T. Di Mascio, P. Valente, A. Marongiu
Publicado en:
2023
Editor:
IEEE
DOI:
10.1109/dac56929.2023.10247840
Autores:
Lukas Knappstein, Niklas Falkenberg, Martin Pfost
Publicado en:
2024
Editor:
VDE
DOI:
10.30420/566262237
Autores:
Erwin Schoitsch, Amund Skavhaug
Publicado en:
Computer Safety, Reliability, and Security. SAFECOMP 2021 Workshops, 2021
Editor:
Springer Cham
DOI:
10.1007/978-3-030-83906-2
Autores:
Matus Kozovsky, Ludek Buchta, Petr Blaha
Publicado en:
IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society, Edición 2023, 2023, ISBN 979-8-3503-3182-0
Editor:
IEEE
DOI:
10.1109/iecon51785.2023.10312642
Autores:
Ludek Buchta, Matus Kozovsky
Publicado en:
IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society, Edición 2023, 2023, ISBN 979-8-3503-3182-0
Editor:
IEEE
DOI:
10.1109/iecon51785.2023.10312305
Autores:
Jorge Perez, Martin Pfost
Publicado en:
2024 Energy Conversion Congress & Expo Europe (ECCE Europe), 2025, Página(s) 1-7
Editor:
IEEE
DOI:
10.1109/ecceeurope62508.2024.10751925
Autores:
Zunnurain Ahmad, Khai Yuan Chang, Heinrich Heiss, Hans-Dieter Wohlmuth
Publicado en:
2023
Editor:
IEEE
DOI:
10.23919/eucap57121.2023.10133659
Autores:
Vincent Latzko, Christian Vielhaus, Mahshid Mehrabi, Frank H. P. Fitzek
Publicado en:
2023
Editor:
IEEE
DOI:
10.1109/wimob58348.2023.10187820
Autores:
Vincent Latzko, Osel Lhamo, Mahshid Mehrabi, Christian Vielhaus, Frank H. P. Fitzek
Publicado en:
2023
Editor:
IEEE
DOI:
10.1109/icnc57223.2023.10074189
Autores:
Andrea Bernardi, Gianluca Brilli, Alessandro Capotondi, Andrea Marongiu, Paolo Burgio
Publicado en:
2022 Design, Automation & Test in Europe Conference & Exhibition (DATE), Antwerp, Belgium, 2022, pp. 915-920, 2022
Editor:
IEEE
DOI:
10.23919/date54114.2022.9774517
Autores:
Edgars Lielamurs, Kaspars Ozols
Publicado en:
2024 19th Biennial Baltic Electronics Conference (BEC), 2024, Página(s) 1-6
Editor:
IEEE
DOI:
10.1109/bec61458.2024.10737976
Autores:
Liliana Marie Prikler and Franz Wotawa
Publicado en:
2022
Editor:
Association for Computing Machinery
DOI:
10.1145/3503229.3547048
Autores:
Erwin Schoitsch, Amund Skavhaug
Publicado en:
Computer Safety, Reliability, and Security; SAFECOMP 2022 Workshops, Edición Springer LNCS 13415, 2022, Página(s) 2-10, ISBN 978-3-031-14861-3
Editor:
Springer Nature
Autores:
Marco Pogliano, Irene Buraioli, Alessandro Sanginario, Danilo Demarchi and Paolo Motto Ros
Publicado en:
2023
Editor:
IEEE
DOI:
10.1109/sensors56945.2023.10325213
Autores:
Sun, Huawei; Feng, Hao; Stettinger, Georg; Servadei, Lorenzo; Wille, Robert
Publicado en:
Crossref, Edición 11, 2023
Editor:
arxiv
DOI:
10.1109/itsc57777.2023.10421802
Autores:
Tomas Horelican, Ludek Zalud
Publicado en:
2024
Editor:
IEEE
Autores:
Anagha Athavale, Ezio Bartocci, Maria Christakis, Matteo Maffei, Dejan Nickovic, Georg Weissenbacher
Publicado en:
2024
Editor:
Cornell University
DOI:
10.48550/arxiv.2405.14400
Autores:
Ibrahim Sayed, Andrejs Cvetkovs, Kaspars Ozols, Rihards Novickis
Publicado en:
2024 19th Biennial Baltic Electronics Conference (BEC), 2024, Página(s) 1-4
Editor:
IEEE
DOI:
10.1109/bec61458.2024.10737935
Autores:
Lukas Schichler, Karin Festl, Selim Solmaz, Daniel Watzenig
Publicado en:
2024
Editor:
Arxiv
DOI:
10.48550/arxiv.2411.18150
Autores:
Liliana Prikler and Franz Wotawa
Publicado en:
2023
Editor:
IEEE
Autores:
Schoitsch, Erwin
Publicado en:
IDIMT-2022 : digitalization of society, business and management in a pandemic : 30th Interdisciplinary Information Management Talks, Edición Schriftenreihe Informatik 51, Trauner Verlag, 2022, Página(s) 357-366, ISBN 978-3-99113-758-0
Editor:
Universität Linz
DOI:
10.35011/idimt-2022-357
Autores:
Lukas Schichler, Karin Festl, Michael Stolz, Daniel Watzenig
Publicado en:
2023
Editor:
IEEE
DOI:
10.1109/med59994.2023.10185811
Autores:
Jan Philipp Degel, Stefan Haehnlein, Lars Boschert, Christian Kloeffer, Martin Doppelbauer
Publicado en:
2023
Editor:
IEEE
DOI:
10.1109/ectidamtncon57770.2023.10139562
Autores:
Giraudi, Lorenzo; Tranchero, Maurizio; Romano, Claudio; Santero, Paolo
Publicado en:
Edición 7, 2023
Editor:
IEEE
DOI:
10.1109/THERMINIC60375.2023.10325905
Autores:
Erwin Schoitsch, Amund Skavhaug
Publicado en:
Computer Safety, Reliability, and Security. SAFECOMP 2023 Workshops, Edición Springer LNCS 14182, 2023, Página(s) 39-46, ISBN 978-3-031-40952-3
Editor:
Springer Nature
Autores:
Anja Dakić, Benjamin Rainer, Thomas Zemen
Publicado en:
2025 IEEE Wireless Communications and Networking Conference (WCNC), 2025, Página(s) 1-6
Editor:
IEEE
DOI:
10.1109/wcnc61545.2025.10978340
Autores:
Stefan Haehnlein, Jan Philipp Degel, Christian Kloeffer
Publicado en:
2023
Editor:
IEEE
DOI:
10.1109/ectidamtncon57770.2023.10139454
Autores:
Schoitsch Erwin
Publicado en:
IDIMT-2021 - 29th Interdisciplinary Information Management Talks, Edición 31, 2021
Editor:
Trauner Verlag - Universität
DOI:
10.5281/zenodo.5828351
Autores:
Christoph Blechinger, Daniel Walch, Martin Schellenberger, Maximilian Hofmann, Harm-Friedrich Steinmetz
Publicado en:
2023
Editor:
IEEE
DOI:
10.1109/edpc60603.2023.10372150
Autores:
Horst J. Lewitschnig, Marcus Mayrhofer, Peter Filzmoser
Publicado en:
2025 Annual Reliability and Maintainability Symposium (RAMS), 2025, Página(s) 1-6
Editor:
IEEE
DOI:
10.1109/rams48127.2025.10935003
Autores:
Erwin Schoitsch, Amund Skavhaug
Publicado en:
Computer Safety, Reliability, and Security. SAFECOMP 2024 Workshops, Edición Springer LNCS 14989, 2024, Página(s) 2-8, ISBN 978-3-031-68737-2
Editor:
Springer Nature
Autores:
Anja Dakic, Benjamin Rainer, Markus Hofer, Thomas Zemen
Publicado en:
2023
Editor:
arXiv
DOI:
10.48550/arxiv.2304.05743
Autores:
Mantas Makulavičius, Rokas Bagdonas, Karolina
Lapkauskaite, Justinas Gargasas, Andrius
Dzedzickis
Publicado en:
2023, ISBN 978-3-031-25843-5
Editor:
Springer, Cham
DOI:
10.1007/978-3-031-25844-2_8
Autores:
Schoitsch, Erwin
Publicado en:
IDIMT-2024 32nd Interdisciplinary Information Management Talks, Edición Schriftenreihe Informatik 53, Trauner Verlag, 2024, Página(s) 163-170, ISBN 978-3-99151-527-2
Editor:
University Linz
DOI:
10.35011/idimt-2024-163
Autores:
Anand Balakrishnan, Stefan Jaksic, Edgar A. Aguilar, Dejan Nickovic, Jyotirmoy V. Deshmukh
Publicado en:
2023
Editor:
IEEE
DOI:
10.1109/cdc49753.2023.10383559
Autores:
Francesco Cecchetto, Luca Lentola, Enrico Orietti, Giada Giorgi
Publicado en:
2024 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2024, Página(s) 1-6
Editor:
IEEE
DOI:
10.1109/i2mtc60896.2024.10561205
Autores:
Schoitsch, Erwin
Publicado en:
IDIMT-2023, 31st Interdisciplinary Information Management Talks, Edición Schriftenreihe Informatik 52, Trauner Verlag, 2023, Página(s) 133-141, ISBN 978-3-99151-176-2
Editor:
Linz
DOI:
10.35011/idimt-2023-133
Autores:
Ovidiu Vermesan, Cristina De Luca, Reiner John,
Marcello Coppola, Bjorn Debaillie, and Giulio Urlini
Publicado en:
Intelligent Edge-Embedded Technologies for Digitising Industry, 2022, ISBN 9788770226110
Editor:
River Publishers
Autores:
Vincent Latzko, Zhenzhen Jia, Christian L. Vielhaus, Mahshid Mehrabi, Frank H. P. Fitzek.
Publicado en:
2024
Editor:
IEEE
DOI:
10.1109/acdsa59508.2024.10468018
Autores:
Karin Festl, Patrick Promitzer, Daniel Watzenig and Huilin Yin
Publicado en:
2023
Editor:
arXiv
DOI:
10.48550/arxiv.2306.07084
Autores:
Ovidiu Vermesan, Marcello Coppola, Reiner John,
Cristina De Luca, Roy Bahr and Giulio Urlini
Publicado en:
Book, Intelligent Edge-Embedded Technologies for Digitising Industry, 2022
Editor:
River Publishers
Autores:
Ledio Jahaj, Lorenz Klampfl, Franz Wotawa
Publicado en:
Lecture Notes in Computer Science, Advances and Trends in Artificial Intelligence. Theory and Applications, 2024, Página(s) 491-502
Editor:
Springer Nature Singapore
DOI:
10.1007/978-981-97-4677-4_40
Autores:
Stanislav Svědiroh, Luděk Žalud
Publicado en:
Lecture Notes in Computer Science, Modelling and Simulation for Autonomous Systems, 2024, Página(s) 21-33
Editor:
Springer Nature Switzerland
DOI:
10.1007/978-3-031-71397-2_3
Autores:
Karin Festl, Michael Stolz and Daniel Watzenig
Publicado en:
2023
Editor:
arxiv
DOI:
10.48550/arxiv.2306.08866
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles