Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

Multiscale Modelling of Dissolutive Wetting

Description du projet

Amélioration de la modélisation du mouillage dissolutif

Une ligne de contact mobile est une ligne d’intersection mobile entre une interface fluide-fluide et une paroi solide. L’étude de ces lignes mobiles est importante pour de nombreuses applications, du revêtement de surface, du refroidissement par pulvérisation et du déplacement d’huile par CO2, à l’impression 3D, aux microréacteurs et aux nanotechnologies. Financé par le programme Actions Marie Skłodowska-Curie, le projet MMDWET a pour ambition d’améliorer la modélisation des lignes de contact mobiles, notamment lorsqu’il s’agit de simuler la façon dont un fluide mouille une surface solide en dissolution (mouillage dissolutif). Le nouveau modèle informatique constituera un changement radical par rapport aux modèles conventionnels, en réduisant le temps de calcul d’au moins 9 ordres de grandeur. Il permettra de réaliser des simulations précises et abordables de problèmes d’ingénierie impliquant un mouillage dissolutif.

Objectif

A moving contact line (MCL) is a moving line of intersection between a fluid/fluid interface and a solid wall. MCLs are central to a wide range of flows in nature and industry, ranging from surface coating, spray cooling, displacement of oil by CO2, to the recent development of 3D printing, microreactors, and nanotechnology. However, the modelling of MCLs has been a classical challenge. In particular, when the solid phase can dissolve into the wetting fluids, e.g. in soldering, formation of alloys and manufacturing of composite materials, there are still a few fundamental challenges which have handicapped the development of predictive computational models. This fellowship project will address those challenges and it has three objectives: (1) to develop a new computational model for 3D direct numerical simulation (DNS) of MCLs on dissolvable solid surfaces, covering both inertial- and diffusion-dominant dissolutive wetting regimes, and resolving nanometer length scales; (2) to develop a novel experimental method using tapping mode atomic force microscopy to directly measure, for the first time of the world, the dynamic contact angle and interface profiles within tens to hundreds of nanometers near the dynamic dissolutive wetting line, and to formulate a theory relating the dynamic contact angle and interface profiles to system parameters; (3) to formulate a reduced-order macroscale computational model which can save computational effort by at least nine orders of magnitude compared with DNS models in numerical simulation of dissolutive wetting. The project will lead to a step change in our modelling and understanding of dissolutive wetting. It will enable accurate and affordable simulations which will greatly benefit design and optimization in a vast range of industrial applications.

Champ scientifique (EuroSciVoc)

Mots‑clés

Programme(s)

Thème(s)

Régime de financement

MSCA-IF - Marie Skłodowska-Curie Individual Fellowships (IF)

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) H2020-MSCA-IF-2020

Voir tous les projets financés au titre de cet appel

Coordinateur

QUEEN MARY UNIVERSITY OF LONDON
Contribution nette de l'UE
€ 224 933,76
Coût total
€ 224 933,76