Projektbeschreibung
Den Weg für Lignin als Grundlage zur Herstellung von Bioharzen bereiten
Nachhaltigkeit beschränkt sich nicht nur auf die Materialien, aus denen die Produkte hergestellt werden, sondern umfasst auch die verschiedenen Beschichtungen, auf die viele von ihnen angewiesen sind. Deshalb geht es bei der Nachhaltigkeit von Beschichtungen um Energie- und Ressourceneinsparung, Abfallminimierung und Effizienz ebenso wie um die Verwendung erneuerbarer und ungiftiger Produkte. In diesem Zusammenhang untersucht das EU-finanzierte Projekt LIGNICOAT den Einsatz von Lignin, das hinsichtlich Kosten und Umweltnutzen ein hohes Potenzial aufweist. Es wird insbesondere neue Synthesewege zur Herstellung von Bioharzen aus Lignin für Beschichtungen vorschlagen. Das übergeordnete Ziel des Projekts ist der Nachweis der technischen, wirtschaftlichen und ökologischen Machbarkeit.
Ziel
Sustainability in coatings covers aspects related to energy and resource conservation, waste minimization or efficiency and the use of renewable and non-toxic products. The coatings industry has been driven by regulatory issues to diminish the content of volatile organic compounds to improve indoor and outdoor air quality, shifting from solvent borne systems (still the preferred choice globally) to waterborne ones. However, even in the case of products labelled as “environmentally friendly” their bio-based content is usually small (up to 30-40%). The challenge is to substitute fossil-based resins maintaining at least the same performance. New bio-based value chains are necessary. Lignin is an underutilized product with a high potential to provide not only economic returns, but also environmental benefits if value-added applications are found. Although lignin is a topic of great interest, the conversion of lignocellulosic biomass into real products is not trivial and still no commercial options are available. LIGNICOAT proposal provides new synthetic routes to obtain bioresins “à la carte” (PUD, ALKYD and EPOXY) based on lignin intermediates (Polyols, Epoxies, phosphorylated, polyacids and carbonates) for application in coatings and validated in an industrial relevant environment (TRL5). The target is not only to increase the biobased content and ensure performance, but also take advantage of lignin specific characteristics, to develop bioadditives (enzymes, chitosan, sugars, …), increasing the biocontent and providing anticorrosive, fireproof and antimicrobial/antiviral features in high-volume market case studies. Depending on the intermediates and the resins used, the estimated biocontent of the coatings will vary between 60-90%. A multidisciplinary and complementary consortium consists in 9 industrial partners BARPIMO, VENCOREX, AEP, WESTLAKE, FORESA, BRS, IRIS, ECOAT and AXIA and 4 RTOs, TECNALIA, VITO, VTT, NORCE and ARDITEC.
Wissenschaftliches Gebiet
- natural scienceschemical sciencesinorganic chemistryinorganic compounds
- natural scienceschemical sciencesorganic chemistryvolatile organic compounds
- engineering and technologymaterials engineeringcoating and films
- engineering and technologyenvironmental engineeringair pollution engineering
- natural sciencesbiological sciencesbiochemistrybiomoleculesproteinsenzymes
Schlüsselbegriffe
Programm/Programme
- H2020-EU.3.2. - SOCIETAL CHALLENGES - Food security, sustainable agriculture and forestry, marine, maritime and inland water research, and the bioeconomy Main Programme
- H2020-EU.2.1.4. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies – Biotechnology
- H2020-EU.3.2.6. - Bio-based Industries Joint Technology Initiative (BBI-JTI)
Aufforderung zur Vorschlagseinreichung
Andere Projekte für diesen Aufruf anzeigenFinanzierungsplan
RIA - Research and Innovation actionKoordinator
20009 DONOSTIA-SAN SEBASTIAN (GIPUZKOA)
Spanien