CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
The deliverable will include a plan describing the data collected throughout the project, their status and how non-confidential research data will be made available to other researchers in a repository.
Design of civil engineering part: joining collets for pipe lines (se abrirá en una nueva ventana)The deliverable will include the design of a part for the particular domain, taking the mechanical and visual properties of recycle material into account. The load case scenario will be described as well.
Life cycle analysis of circular production process (se abrirá en una nueva ventana)The report will include an analysis of the environmental and economic impact of the new, circular manufacturing process and its variants as developed in the project. A comparison will be made to the conventional, linear process.
Sorting method for glass fibre parts (se abrirá en una nueva ventana)A prototype implementation of spectroscopic sorting method with inline capabilities for the sorting of end-of-life glass fibre parts according to the type of resin will be set up. Tests results will be provided and a design for upscaling to large quantities.
Assessment of parts made from recycled material (se abrirá en una nueva ventana)"This deliverable will consist of sample parts manufactured from recycled material for all domains investigated in the project. Results of the characterization of the parts will be provided and compared to requirements as well as to ""conventional"" (i.e. using virgin material) designs. In addition, for each part marketing-oriented visual material (one page per part) will be included as well."
Sorting method for carbon fibre parts (se abrirá en una nueva ventana)This report will describe the experimental setup and the results of inline spectroscopy for the sorting of end-of-life carbon fibre parts.
This deliverable will be a data set that is made publicly available in the Zenodo repository. It will include suitably structured data and meta-information to make the data usable for other researchers.
This demonstration will show all processing and recycling steps that have been developed, including the quality grading systems. An evaluation report with sample parts and an assessment relative to the expected outcomes will be provided.
Quality control and grading systems (se abrirá en una nueva ventana)The prototype deliverable will consist of the quality control and quality grading systems implemented for the spinning, weaving and nonwoven processes. Test result of materials of different quality will be reported and an outlook about the full integration with the manufacturing process will be provided.
Liquid recycled fraction for amine epoxy resin (se abrirá en una nueva ventana)Demonstration of analysis and phase separation of retrieved liquid fraction suitable for application in NOMA’s virgin epoxy resin with different mixture ratios.
This deliverable will consists of a set of sample materials manufactured for part production in WP6. It will report about the quantities of carbon fibre fabric and will provide a characterization of the resulting material properties to be correlated with mechanical part performance.
This deliverable is the project web page and a “visual identity” package. The report will describe the structure, the content and the intended use of the web page, as well as the logo, colours, fonts, styles and templates to be used by all project partners in the project.
Final report on standardization (se abrirá en una nueva ventana)The report will address relevant standards that relate to the use of recycled material in the different domains also including the results of interactions with OEMs in the different domains.
Documentation of training material (se abrirá en una nueva ventana)The deliverable will consist of the training material prepared in the project and it will describe its further use.
Publicaciones
Autores:
Christian Eitzinger (Profactor)
Publicado en:
ICCM International Conference on Composite Materials, 2023
Editor:
Conference Partners International
Autores:
Johannes Leis, Romy Naumann, Anna Große (STFI)
Publicado en:
CTT - Chemnitzer Textiltechniktagung, 2024
Editor:
CTT - Chemnitzer Textiltechniktagung
Autores:
Johannes Leis (STFI), Romy Naumann(STFI), Marcel Hofmann(STFI), Anna Große(STFI), Thomas Roure (Chomarat), Christian Eitzinger(Profactor)
Publicado en:
Dornbirn GFC Conference, 2024
Editor:
Dornbirn GFC
Autores:
Alexander Walch (Profactor)
Publicado en:
SAMPE Europe Conference, 2023
Editor:
SAMPE
Autores:
Clara Leclaire, Robin Oddon (Techtera)
Publicado en:
Dornbirn Global Fibres Congress, 2023
Editor:
Dornbirn Global Fibres Congress
Autores:
Laura Fulgencio Medrano, Asier Asueta Asensio, Sixto Arnaiz Aguilar, Jon Leivar Cilleruelo, Izotz Amundarain Hidalgo, Rafa Miguel Fernandez, Ana Iruskieta Uribe (GAIKER)
Publicado en:
MATCOMP Conference, 2023
Editor:
AEMAC – Asociación Española de Materiales Compuestos
Autores:
Abhiram Kolli, Denis Krajnc, Lukas Hartung, Christian Eitzinger
Publicado en:
SAMPE Conference, 2024
Editor:
SAMPE Conference
Autores:
Itxaso Azcune; Arrate Huegun; Alaitz Rekondo (CIDETEC)
Publicado en:
MATCOMP Conference, 2023
Editor:
AEMAC – Asociación Española de Materiales Compuestos
Autores:
Anastasia Gkika1, Lydia Peraki(IRES), Zoë van de Pas (VDL), Jaime Sistach (FIDAMC), Christian Eitzinger (PROFACTOR), Elias Koumoulos (IRES)
Publicado en:
ECCM 21st Conference on Composite Materials, 2024
Editor:
ECCM Nantes
Autores:
Jaime Sistach, Álvaro Calero, Bernardo López‐Romano, María Ordoñez (FIDAMC)
Publicado en:
MATCOMP Conference, 2023
Editor:
AEMAC – Asociación Española de Materiales Compuestos
Autores:
Robin Oddon (Techtera)
Publicado en:
Open Access Government, 2023, ISSN 2516-3817
Editor:
Open Access Government
DOI:
10.56367/OAG-040-11075-01
Autores:
Romy Naumann (STFI)
Publicado en:
Textil Plus, Edición 09/10, 2023, ISSN 2296-1208
Editor:
Verlag Textilplus AG
DOI:
10.3030/101057394
Autores:
Christian Eitzinger (Profactor)
Publicado en:
SAMPE Europe conference, 2022
Editor:
SAMPE
Autores:
Itxaso Azcune, Edurne Elorza, Alaitz Ruiz de Luzuriaga, Arrate Huegun , Alaitz Rekondo (CIDETEC), Hans-Jürgen Grande (CIDETEC, UPV/EHU)
Publicado en:
Polymers, Edición Polymers 2023, 15(20), 4123, 2023, ISSN 2073-4360
Editor:
Multidisciplinary Digital Publishing Institute
DOI:
10.3390/polym15204123
Autores:
Asier Asueta (Fundación GAIKER)
Publicado en:
Open Access Government, 2023, ISSN 2516-3817
Editor:
Open Access Government
DOI:
10.56367/OAG-040-11075-03
Autores:
Álvaro Calero Casanova (FIDAMC)
Publicado en:
Open Access Government, 2023, ISSN 2516-3817
Editor:
Open Access Government
DOI:
10.56367/OAG-040-11075-02
Autores:
Christian Eitzinger (Profactor)
Publicado en:
Open Access Government, 2023, ISSN 2516-3817
Editor:
Open Access Government
DOI:
10.56367/OAG-040-11075-04
Autores:
L. Fulgencio, A. Asueta, S. Arnaiz, J. Leivar, I. Amundarain, R. Miguel, A. Iruskieta
Publicado en:
Revista de Materiales Compuestos, Edición 8, 2024, ISSN 2531-0739
Editor:
Scipedia, S.L.
DOI:
10.23967/r.matcomp.2024.04.07
Autores:
A. Rekondo, I. Azcune, A. Huegun
Publicado en:
Revista de Materiales Compuestos, Edición 8, 2024, ISSN 2531-0739
Editor:
Scipedia, S.L.
DOI:
10.23967/r.matcomp.2024.04.10
Autores:
VDL Fibertech
Publicado en:
Kunststof&Rubber, 2025
Editor:
Kunststof&Rubber
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles