CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.
Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .
Rezultaty
The deliverable will include a plan describing the data collected throughout the project, their status and how non-confidential research data will be made available to other researchers in a repository.
Design of civil engineering part: joining collets for pipe lines (odnośnik otworzy się w nowym oknie)The deliverable will include the design of a part for the particular domain, taking the mechanical and visual properties of recycle material into account. The load case scenario will be described as well.
Life cycle analysis of circular production process (odnośnik otworzy się w nowym oknie)The report will include an analysis of the environmental and economic impact of the new, circular manufacturing process and its variants as developed in the project. A comparison will be made to the conventional, linear process.
Sorting method for glass fibre parts (odnośnik otworzy się w nowym oknie)A prototype implementation of spectroscopic sorting method with inline capabilities for the sorting of end-of-life glass fibre parts according to the type of resin will be set up. Tests results will be provided and a design for upscaling to large quantities.
Assessment of parts made from recycled material (odnośnik otworzy się w nowym oknie)"This deliverable will consist of sample parts manufactured from recycled material for all domains investigated in the project. Results of the characterization of the parts will be provided and compared to requirements as well as to ""conventional"" (i.e. using virgin material) designs. In addition, for each part marketing-oriented visual material (one page per part) will be included as well."
Sorting method for carbon fibre parts (odnośnik otworzy się w nowym oknie)This report will describe the experimental setup and the results of inline spectroscopy for the sorting of end-of-life carbon fibre parts.
This deliverable will be a data set that is made publicly available in the Zenodo repository. It will include suitably structured data and meta-information to make the data usable for other researchers.
This demonstration will show all processing and recycling steps that have been developed, including the quality grading systems. An evaluation report with sample parts and an assessment relative to the expected outcomes will be provided.
Quality control and grading systems (odnośnik otworzy się w nowym oknie)The prototype deliverable will consist of the quality control and quality grading systems implemented for the spinning, weaving and nonwoven processes. Test result of materials of different quality will be reported and an outlook about the full integration with the manufacturing process will be provided.
Liquid recycled fraction for amine epoxy resin (odnośnik otworzy się w nowym oknie)Demonstration of analysis and phase separation of retrieved liquid fraction suitable for application in NOMA’s virgin epoxy resin with different mixture ratios.
This deliverable will consists of a set of sample materials manufactured for part production in WP6. It will report about the quantities of carbon fibre fabric and will provide a characterization of the resulting material properties to be correlated with mechanical part performance.
This deliverable is the project web page and a “visual identity” package. The report will describe the structure, the content and the intended use of the web page, as well as the logo, colours, fonts, styles and templates to be used by all project partners in the project.
Final report on standardization (odnośnik otworzy się w nowym oknie)The report will address relevant standards that relate to the use of recycled material in the different domains also including the results of interactions with OEMs in the different domains.
Documentation of training material (odnośnik otworzy się w nowym oknie)The deliverable will consist of the training material prepared in the project and it will describe its further use.
Publikacje
Autorzy:
Christian Eitzinger (Profactor)
Opublikowane w:
ICCM International Conference on Composite Materials, 2023
Wydawca:
Conference Partners International
Autorzy:
Johannes Leis, Romy Naumann, Anna Große (STFI)
Opublikowane w:
CTT - Chemnitzer Textiltechniktagung, 2024
Wydawca:
CTT - Chemnitzer Textiltechniktagung
Autorzy:
Johannes Leis (STFI), Romy Naumann(STFI), Marcel Hofmann(STFI), Anna Große(STFI), Thomas Roure (Chomarat), Christian Eitzinger(Profactor)
Opublikowane w:
Dornbirn GFC Conference, 2024
Wydawca:
Dornbirn GFC
Autorzy:
Alexander Walch (Profactor)
Opublikowane w:
SAMPE Europe Conference, 2023
Wydawca:
SAMPE
Autorzy:
Clara Leclaire, Robin Oddon (Techtera)
Opublikowane w:
Dornbirn Global Fibres Congress, 2023
Wydawca:
Dornbirn Global Fibres Congress
Autorzy:
Laura Fulgencio Medrano, Asier Asueta Asensio, Sixto Arnaiz Aguilar, Jon Leivar Cilleruelo, Izotz Amundarain Hidalgo, Rafa Miguel Fernandez, Ana Iruskieta Uribe (GAIKER)
Opublikowane w:
MATCOMP Conference, 2023
Wydawca:
AEMAC – Asociación Española de Materiales Compuestos
Autorzy:
Abhiram Kolli, Denis Krajnc, Lukas Hartung, Christian Eitzinger
Opublikowane w:
SAMPE Conference, 2024
Wydawca:
SAMPE Conference
Autorzy:
Itxaso Azcune; Arrate Huegun; Alaitz Rekondo (CIDETEC)
Opublikowane w:
MATCOMP Conference, 2023
Wydawca:
AEMAC – Asociación Española de Materiales Compuestos
Autorzy:
Anastasia Gkika1, Lydia Peraki(IRES), Zoë van de Pas (VDL), Jaime Sistach (FIDAMC), Christian Eitzinger (PROFACTOR), Elias Koumoulos (IRES)
Opublikowane w:
ECCM 21st Conference on Composite Materials, 2024
Wydawca:
ECCM Nantes
Autorzy:
Jaime Sistach, Álvaro Calero, Bernardo López‐Romano, María Ordoñez (FIDAMC)
Opublikowane w:
MATCOMP Conference, 2023
Wydawca:
AEMAC – Asociación Española de Materiales Compuestos
Autorzy:
Robin Oddon (Techtera)
Opublikowane w:
Open Access Government, 2023, ISSN 2516-3817
Wydawca:
Open Access Government
DOI:
10.56367/OAG-040-11075-01
Autorzy:
Romy Naumann (STFI)
Opublikowane w:
Textil Plus, Numer 09/10, 2023, ISSN 2296-1208
Wydawca:
Verlag Textilplus AG
DOI:
10.3030/101057394
Autorzy:
Christian Eitzinger (Profactor)
Opublikowane w:
SAMPE Europe conference, 2022
Wydawca:
SAMPE
Autorzy:
Itxaso Azcune, Edurne Elorza, Alaitz Ruiz de Luzuriaga, Arrate Huegun , Alaitz Rekondo (CIDETEC), Hans-Jürgen Grande (CIDETEC, UPV/EHU)
Opublikowane w:
Polymers, Numer Polymers 2023, 15(20), 4123, 2023, ISSN 2073-4360
Wydawca:
Multidisciplinary Digital Publishing Institute
DOI:
10.3390/polym15204123
Autorzy:
Asier Asueta (Fundación GAIKER)
Opublikowane w:
Open Access Government, 2023, ISSN 2516-3817
Wydawca:
Open Access Government
DOI:
10.56367/OAG-040-11075-03
Autorzy:
Álvaro Calero Casanova (FIDAMC)
Opublikowane w:
Open Access Government, 2023, ISSN 2516-3817
Wydawca:
Open Access Government
DOI:
10.56367/OAG-040-11075-02
Autorzy:
Christian Eitzinger (Profactor)
Opublikowane w:
Open Access Government, 2023, ISSN 2516-3817
Wydawca:
Open Access Government
DOI:
10.56367/OAG-040-11075-04
Autorzy:
L. Fulgencio, A. Asueta, S. Arnaiz, J. Leivar, I. Amundarain, R. Miguel, A. Iruskieta
Opublikowane w:
Revista de Materiales Compuestos, Numer 8, 2024, ISSN 2531-0739
Wydawca:
Scipedia, S.L.
DOI:
10.23967/r.matcomp.2024.04.07
Autorzy:
A. Rekondo, I. Azcune, A. Huegun
Opublikowane w:
Revista de Materiales Compuestos, Numer 8, 2024, ISSN 2531-0739
Wydawca:
Scipedia, S.L.
DOI:
10.23967/r.matcomp.2024.04.10
Autorzy:
VDL Fibertech
Opublikowane w:
Kunststof&Rubber, 2025
Wydawca:
Kunststof&Rubber
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników