CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
Description of mathematical models used to define/set-up the FLEX4FACT cluster flexibility.
Technical reports: sample cases and numerical experiments to test the beta version of the cloud platform (se abrirá en una nueva ventana)Description of the sample cases and numerical experiments performed to test the beta version of the FLEX4FACT Industrial Cluster Flexibility Platform.
Flex4Fact System Reference Architecture, Standard and Protocols (se abrirá en una nueva ventana)It will illustrate in a simplified way the design principle, the main system components, and their relationships. It will provide the high-level requirements that guide subsystem development (including standards, protocols, and cybersecurity), address key functions, and document interfaces.
KPIs Table for Validation (se abrirá en una nueva ventana)Revision and update of the KPIs considering the knowledge acquired during the project.
Optimization of industry flexibility to increase integration of renewables: a case study (se abrirá en una nueva ventana)Two scenarios per use case will be defined: (i) a status quo, with associated carbon footprint and energy consumption per unit of product, to be used for benchmarking, and (ii) a prospective scenario with techno-economic evaluations based on expected transition paths of the regional energy mix in line with the EUs emission reduction targets by 2030. The cost reduction, carbon reduction potential per unit of output, and increased share of renewables in the energy mark of the products, will be evaluated for each use-case over the defined scenarios. Detailed constraints at case level will be defined to reduce the complexity of the optimization.
Model description and scope of techno-economic assessments (se abrirá en una nueva ventana)Modeling and scoping of the techno-economic assessments for the identified industrial settings. A mathematical model based on optimization techniques will be developed to perform the system-level techno-economic assessments.
Validation Protocols (se abrirá en una nueva ventana)Definition of the protocols to validate the FLEX4FACT solutions in the industrial settings.
Technical report: Hardware and software architecture design of FLEX4FACT cloud platform (se abrirá en una nueva ventana)Description of the hardware and software architecture of theFLEX4FACT Industrial Cluster Flexibility Platform.
Technical report: Required data definition for developing and executing the algorithms for optimizing planning and scheduling of the manufacturing processes (se abrirá en una nueva ventana)Definition of the required data and its granularity needed for the optimization algorithms developed in T4.2.
Technical report: models and algorithms for FLEX4FACT cluster flexibility optimization in the internal/external markets (se abrirá en una nueva ventana)Description of the mathematical models developed for finding the optimal solution(s)from the cluster/markets point of view, favouring the use of RESs and the self-consumption of the energy produced by RESs themselves
Communication and dissemination toolbox, incl. Website (se abrirá en una nueva ventana)Toolbox for communication and dissemination activities in the project. The toolbox includes branding, brochure, roll-up, templates for materials and guidelines for partners, and the project website.
Technical report: sample cases and numerical experiments to test FLEX4FACT cluster flexibility algorithms (se abrirá en una nueva ventana)Description of the sample cases and experiments performed to validate the cluster flexibility algorithms.
Technical report: the electricity, dispatching and ancillary services markets in FLEX4FACT countries (se abrirá en una nueva ventana)Description of the electricity markets, the dispatching services markets, and the ancillary services markets in those countries where the uses cases of the FLEX4FACT project are located, and the procedures to buy/sell/exchange electricity and grid services.
Model Validation Results and sensitivity analysis (se abrirá en una nueva ventana)Description of the validation and validation results of all the models developed in Task 3.3, under different operation conditions and varying the values of the critical input parameters.
Communication, dissemination and exploitation plan update (se abrirá en una nueva ventana)Update of the Communication, dissemination and exploitation plan
Technical report: models and algorithms for optimizing planning and scheduling of the manufacturing processes (se abrirá en una nueva ventana)Description of the advanced digital algorithms for planning and control of productionprocesses, used to flexibilize the industrial processes.
Technical report: sample cases and numerical experiments to test FLEX4FACT cluster flexibility optimization (se abrirá en una nueva ventana)Description of the sample cases and numerical experiments perfomed to validate the mathematical models for the optimal solution(s) from the cluster/markets point of view, favouring the use of RESs and the self-consumption of the energy produced by RESs themselves.
Communication, dissemination and exploitation plan (se abrirá en una nueva ventana)Detailed roadmap based on the input of all partners and on the draft strategydescribed in section 2.2.
Description and scope of LCA and sustainability analysis (se abrirá en una nueva ventana)The scope of the LCA, including the environmental impact categories to be covered, will be defined in collaboration with the project partners (using existing data sets) and will be based on the work undertaken in WP1. Describes and defines the system boundaries and the function of the study, reflecting the reasons for conducting the assessment. This will ensure consistency and comparability in the assessment of the various technologies/methods under investigation
Project promotional video (se abrirá en una nueva ventana)Project promotional video featuring specific FLEX4FACT solutions and highlighting use cases.
Technical report: Sample case description and algorithm validation (se abrirá en una nueva ventana)Description and results of the sample test case to validate the flexibilization algorithms developed in tasks 4.2.
Data Management Plan (se abrirá en una nueva ventana)Description of the data management policy that the Consortium will apply to its entire data cycle, including Ethics and Privacy. Overview of the data that the project is expected to generate, the types and formats of that data, and how that data will be processed and stored. This is intended to contribute to proper data handling during the lifetime of the project.
Forethought of the activities for the integration of the tools for validation in the industrial settings.
Publicaciones
Autores:
Paul Kegfai Wan, Matteo Ranaboldo, Alessandro Burgio, Chiara Caccamo & Giuseppe Fragapane
Publicado en:
IFIP Advances in Information and Communication technology, bookseries IFIPAICT Volume 692, Edición PP634-649, 2023, ISBN 978-3-031-43688-8
Editor:
Springre Link
DOI:
10.1007/978-3-031-43688-8_44
Autores:
Olga Ogorodnyk Endre Sølvsberg og Ragnhild Johnsen Eleftheriadis
Publicado en:
Procedia CIRP, 2025, ISSN 2212-8271
Editor:
Procedia CIRP
Autores:
Emrah Arica, Olga Ogorodnyk, Matteo Ranaboldo, Marc Juanpera, Pau Fisco-Compte, Bruno Domenech & al.
Publicado en:
Procedia Cirp, 2025, ISSN 2212-8271
Editor:
Procedia Cirp
Autores:
Fisco-Compte, Pau; Bullich-Massagué, Eduard; Domenech, Bruno; Juanpera, Marc; Pastor, Rafael; Ranaboldo, Matteo
Publicado en:
IET Conference Proceedings, Edición 5, 2024
Editor:
CIRED
DOI:
10.1049/ICP.2024.2080
Autores:
Fisco-Compte, Pau; Bullich-Massagué, Eduard; Domenech, Bruno; Juanpera, Marc; Pastor, Rafael; Ranaboldo, Matteo
Publicado en:
Industrial Engineering and Industrial Management, 2024, ISBN 978-3-031-57996-7
Editor:
Springer Nature
DOI:
10.1007/978-3-031-57996-7_48
Autores:
Kitch, Madeline; Støen, Mikael; Muñoz Ortiz, Miguel; Lima Silva, Thiago; Juanpera, Marc; Fisco-Compte, Pau
Publicado en:
SINTEF Report, 2024, ISBN 978-82-14-07014-9
Editor:
SINTEF Industry
Autores:
Bullich-Massagué, Eduard; Ranaboldo, Matteo; Aragüés-Peñalba, Mònica; Arica, Emrah; Bade, Alexander; Burgio, Alessandro; Caccamo, Chiara; Caprara, Adriano; Cimmino, Domenico; Domenech, Bruno; Danoso, Irene; Fragapane, Giuseppe; González-Font-de-Rubinat, Paula; Jahnke, Eric; Juanpera, Marc; Manafi, Ehsan; Rövekamp, Jessica; Tani, Riccardo
Publicado en:
Renewable and Sustainable Energy Reviews, Edición 203, 2024, ISSN 1364-0321
Editor:
Elsevier BV
DOI:
10.1016/J.RSER.2024.114797
Autores:
Lutz Sommer
Publicado en:
Crossref, 2024, ISSN 2046-1402
Editor:
F1000 Research Ltd
DOI:
10.12688/OPENRESEUROPE.16728.1
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles