Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS

Industrial Cluster FLEXibility platform for sustainable FACTories to reduce CO2 emissions and to enable the Energy Transition

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Technical report: models and algorithms for managing FLEX4FACT cluster flexibility (s’ouvre dans une nouvelle fenêtre)

Description of mathematical models used to define/set-up the FLEX4FACT cluster flexibility.

Technical reports: sample cases and numerical experiments to test the beta version of the cloud platform (s’ouvre dans une nouvelle fenêtre)

Description of the sample cases and numerical experiments performed to test the beta version of the FLEX4FACT Industrial Cluster Flexibility Platform.

Flex4Fact System Reference Architecture, Standard and Protocols (s’ouvre dans une nouvelle fenêtre)

It will illustrate in a simplified way the design principle, the main system components, and their relationships. It will provide the high-level requirements that guide subsystem development (including standards, protocols, and cybersecurity), address key functions, and document interfaces.

KPIs Table for Validation (s’ouvre dans une nouvelle fenêtre)

Revision and update of the KPIs considering the knowledge acquired during the project.

Optimization of industry flexibility to increase integration of renewables: a case study (s’ouvre dans une nouvelle fenêtre)

Two scenarios per use case will be defined: (i) a status quo, with associated carbon footprint and energy consumption per unit of product, to be used for benchmarking, and (ii) a prospective scenario with techno-economic evaluations based on expected transition paths of the regional energy mix in line with the EUs emission reduction targets by 2030. The cost reduction, carbon reduction potential per unit of output, and increased share of renewables in the energy mark of the products, will be evaluated for each use-case over the defined scenarios. Detailed constraints at case level will be defined to reduce the complexity of the optimization.

Model description and scope of techno-economic assessments (s’ouvre dans une nouvelle fenêtre)

Modeling and scoping of the techno-economic assessments for the identified industrial settings. A mathematical model based on optimization techniques will be developed to perform the system-level techno-economic assessments.

Validation Protocols (s’ouvre dans une nouvelle fenêtre)

Definition of the protocols to validate the FLEX4FACT solutions in the industrial settings.

Technical report: Hardware and software architecture design of FLEX4FACT cloud platform (s’ouvre dans une nouvelle fenêtre)

Description of the hardware and software architecture of theFLEX4FACT Industrial Cluster Flexibility Platform.

Technical report: Required data definition for developing and executing the algorithms for optimizing planning and scheduling of the manufacturing processes (s’ouvre dans une nouvelle fenêtre)

Definition of the required data and its granularity needed for the optimization algorithms developed in T4.2.

Technical report: models and algorithms for FLEX4FACT cluster flexibility optimization in the internal/external markets (s’ouvre dans une nouvelle fenêtre)

Description of the mathematical models developed for finding the optimal solution(s)from the cluster/markets point of view, favouring the use of RESs and the self-consumption of the energy produced by RESs themselves

Communication and dissemination toolbox, incl. Website (s’ouvre dans une nouvelle fenêtre)

Toolbox for communication and dissemination activities in the project. The toolbox includes branding, brochure, roll-up, templates for materials and guidelines for partners, and the project website.

Technical report: sample cases and numerical experiments to test FLEX4FACT cluster flexibility algorithms (s’ouvre dans une nouvelle fenêtre)

Description of the sample cases and experiments performed to validate the cluster flexibility algorithms.

Technical report: the electricity, dispatching and ancillary services markets in FLEX4FACT countries (s’ouvre dans une nouvelle fenêtre)

Description of the electricity markets, the dispatching services markets, and the ancillary services markets in those countries where the uses cases of the FLEX4FACT project are located, and the procedures to buy/sell/exchange electricity and grid services.

Model Validation Results and sensitivity analysis (s’ouvre dans une nouvelle fenêtre)

Description of the validation and validation results of all the models developed in Task 3.3, under different operation conditions and varying the values of the critical input parameters.

Communication, dissemination and exploitation plan update (s’ouvre dans une nouvelle fenêtre)

Update of the Communication, dissemination and exploitation plan

Technical report: models and algorithms for optimizing planning and scheduling of the manufacturing processes (s’ouvre dans une nouvelle fenêtre)

Description of the advanced digital algorithms for planning and control of productionprocesses, used to flexibilize the industrial processes.

Technical report: sample cases and numerical experiments to test FLEX4FACT cluster flexibility optimization (s’ouvre dans une nouvelle fenêtre)

Description of the sample cases and numerical experiments perfomed to validate the mathematical models for the optimal solution(s) from the cluster/markets point of view, favouring the use of RESs and the self-consumption of the energy produced by RESs themselves.

Communication, dissemination and exploitation plan (s’ouvre dans une nouvelle fenêtre)

Detailed roadmap based on the input of all partners and on the draft strategydescribed in section 2.2.

Description and scope of LCA and sustainability analysis (s’ouvre dans une nouvelle fenêtre)

The scope of the LCA, including the environmental impact categories to be covered, will be defined in collaboration with the project partners (using existing data sets) and will be based on the work undertaken in WP1. Describes and defines the system boundaries and the function of the study, reflecting the reasons for conducting the assessment. This will ensure consistency and comparability in the assessment of the various technologies/methods under investigation

Project promotional video (s’ouvre dans une nouvelle fenêtre)

Project promotional video featuring specific FLEX4FACT solutions and highlighting use cases.

Technical report: Sample case description and algorithm validation (s’ouvre dans une nouvelle fenêtre)

Description and results of the sample test case to validate the flexibilization algorithms developed in tasks 4.2.

Data Management Plan (s’ouvre dans une nouvelle fenêtre)

Description of the data management policy that the Consortium will apply to its entire data cycle, including Ethics and Privacy. Overview of the data that the project is expected to generate, the types and formats of that data, and how that data will be processed and stored. This is intended to contribute to proper data handling during the lifetime of the project.

System Integration Plan (s’ouvre dans une nouvelle fenêtre)

Forethought of the activities for the integration of the tools for validation in the industrial settings.

Publications

A framework for enabling manufacturing flexibility and optimizing industrial demand response services (s’ouvre dans une nouvelle fenêtre)

Auteurs: Paul Kegfai Wan, Matteo Ranaboldo, Alessandro Burgio, Chiara Caccamo & Giuseppe Fragapane
Publié dans: IFIP Advances in Information and Communication technology, bookseries IFIPAICT Volume 692, Numéro PP634-649, 2023, ISBN 978-3-031-43688-8
Éditeur: Springre Link
DOI: 10.1007/978-3-031-43688-8_44

Digital Twin and Deman Response – Sustainable Tools for Quality and Energy Consumption Optimization in Manufacturing

Auteurs: Olga Ogorodnyk Endre Sølvsberg og Ragnhild Johnsen Eleftheriadis
Publié dans: Procedia CIRP, 2025, ISSN 2212-8271
Éditeur: Procedia CIRP

A framework for designing a decision support system for energy aware production planning and scheduling

Auteurs: Emrah Arica, Olga Ogorodnyk, Matteo Ranaboldo, Marc Juanpera, Pau Fisco-Compte, Bruno Domenech & al.
Publié dans: Procedia Cirp, 2025, ISSN 2212-8271
Éditeur: Procedia Cirp

Multi-stage optimization flexibility algorithm for demand response in ancillary services. An industrial case study (s’ouvre dans une nouvelle fenêtre)

Auteurs: Fisco-Compte, Pau; Bullich-Massagué, Eduard; Domenech, Bruno; Juanpera, Marc; Pastor, Rafael; Ranaboldo, Matteo
Publié dans: IET Conference Proceedings, Numéro 5, 2024
Éditeur: CIRED
DOI: 10.1049/ICP.2024.2080

The Impact of Electricity Tariffs on Optimal Production Scheduling (s’ouvre dans une nouvelle fenêtre)

Auteurs: Fisco-Compte, Pau; Bullich-Massagué, Eduard; Domenech, Bruno; Juanpera, Marc; Pastor, Rafael; Ranaboldo, Matteo
Publié dans: Industrial Engineering and Industrial Management, 2024, ISBN 978-3-031-57996-7
Éditeur: Springer Nature
DOI: 10.1007/978-3-031-57996-7_48

Optimal Industrial Clusters: Flex4Fact Summer Research Report

Auteurs: Kitch, Madeline; Støen, Mikael; Muñoz Ortiz, Miguel; Lima Silva, Thiago; Juanpera, Marc; Fisco-Compte, Pau
Publié dans: SINTEF Report, 2024, ISBN 978-82-14-07014-9
Éditeur: SINTEF Industry

Renewable and Sustainable Energy Reviews (s’ouvre dans une nouvelle fenêtre)

Auteurs: Bullich-Massagué, Eduard; Ranaboldo, Matteo; Aragüés-Peñalba, Mònica; Arica, Emrah; Bade, Alexander; Burgio, Alessandro; Caccamo, Chiara; Caprara, Adriano; Cimmino, Domenico; Domenech, Bruno; Danoso, Irene; Fragapane, Giuseppe; González-Font-de-Rubinat, Paula; Jahnke, Eric; Juanpera, Marc; Manafi, Ehsan; Rövekamp, Jessica; Tani, Riccardo
Publié dans: Renewable and Sustainable Energy Reviews, Numéro 203, 2024, ISSN 1364-0321
Éditeur: Elsevier BV
DOI: 10.1016/J.RSER.2024.114797

F1000 Research (s’ouvre dans une nouvelle fenêtre)

Auteurs: Lutz Sommer
Publié dans: Crossref, 2024, ISSN 2046-1402
Éditeur: F1000 Research Ltd
DOI: 10.12688/OPENRESEUROPE.16728.1

Recherche de données OpenAIRE...

Une erreur s’est produite lors de la recherche de données OpenAIRE

Aucun résultat disponible

Mon livret 0 0