Demonstrator of systemic solutions for the territorial deployment of the circular economy in the Trilateral Chemical Region with a focus on plastic waste streams Quality for Recycling

Projektinformationen

SYSCHEMIQ

ID Finanzhilfevereinbarung: 101059909

DOI

10.3030/101059909

EK-Unterschriftsdatum 7 Juni 2022

Startdatum 1 September 2022

Enddatum 31 August 2026

Finanziert unter

• Food, Bioeconomy Natural Resources, Agriculture and Environment

Gesamtkosten

€ 11 219 362,10

EU-Beitrag

€ 9 573 418,00

Koordiniert durch

CHEMELOT CAMPUS BV
Netherlands

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Documents, reports (15)

Report on qualitative and quantitative analysis on in-depth interviews and case studies

Result from Task 4.1: Report defining citizens’ behavioural biases, the status of capability, opportunity and motivations that could generate behavioural change towards plastic recycling

Assessment of the recyclability of technologies to obtain barrier lidding and coatings for PP trays

Result of Task 2.1 and 2.2: New design solutions for liddings, sleeves, labels and colour

(New) sorting standards for sorted materials

Result from Task 3.2: Report describing new sorting standards and solutions based on matching current variations in MPW composition against quality requirements from chemical and mechanical recycling

Methodology report Governance Support Systems: Design 1.0

Result of Task 1.1.: Design (configure, assemble) a methodological approach for Dual Track Governance Support Systems in circular, transitional settings, based on amongst others the PRISM and QR tools.

Quick scan of economic and environmental performance of plastics recycling pathways

Result from Task 7-2: Report outlining economic and environmental impact of plastics recycling taking into account new technologies and circular governance

Samples available from PCR PP

Final result of Task 2.3: PP materials based on Recycled Plastics with higher quality resulting from new designs for recycling

Multi-actor governance model, features and proposed actions: V2.0

Result of Task 1.2, 1.3 and 1.4: Second version of the case report Multi-actor governance model (Zuyd), Longlist of salient governance features, positioned on the multi-actor governance model of the CCH ecosystem (UM) and Shortlist of proposed actions for the CCH ecosystem (TNO). The shortlist is to be presented to the governmental board (that will be involved during the road)

JOINT CCRI deliverable - SYSCHEMIQ Policy briefs and guidelines on the circular systemic solutions adopted (incl. strengths and weaknesses) UPDATE

Result from Task 8.5 and 8.6: Report with SWOT of SyschemiQ innovations, and proposed governance actions, including results and learning experiences from DTG workshop in M18, and coordinated with clustering activities (other EU funded projects and CCRI), as a basis for dissemination and further replication of the SyschemiQ learning experiences towards other regional innovation eco-systems (as mapped under D8.5). Targeted audience will be regional policy makers (policy feedback) , and other stakeholders (industry, research and civil society organisations) in line with the Dual Track Governance concept, as well as national and European policy makers dealing with circular economy. To be confirmed during the project. This deliverable will describe potential synergies and joint achievements with the project TREASOURCE which is issued from the same topic (CIRCBIO-01-01). The nature of the joint work will be further defined during the project but may include joint policy feedback such as policy brief or white paper.

EU Regions stakeholders' map and MoUs with relevant Plastics twinning regions

Result from Task 8.3: Report mapping regions and industrial clusters throughout the EU and analysing ongoing (plastics) recycling and regional circular economic action plans (CEAP) and activities.

SYSCHEMIQ DTG Knowledge tools framework for replication

Result from Task 8.5: Report describing tools and framework developed for carrying out Dual Track Governance workshops in Flanders (B), North Rhein WestPhalia (D) and Lombardia (IT). A candidate framework is the Boundary Work framework van Myrthe Velter by MSI

Intermediate report on TOK activities (incl. stakeholder events with twinning regions)

Result from Task 8.4: Report on Transfer of Knowledge activities organised with the support of ECRN at M12, and 24) carried out with the Twinning Regions. Final reporting on these activities (e.g. further stakeholder events organised under the coordination of ECRN in M36 and 48) will be reported in D8.2

Multi-actor governance model, features and proposed actions: V1.0

Result of Task 1.2, 1.3 and 1.4: . First version of the case report Multi-actor governance model (Zuyd), Longlist of salient governance features, positioned on the multi-actor governance model of the CCH ecosystem (UM) and Shortlist of proposed actions for the CCH ecosystem (TNO). The shortlist is to be presented to the governmental board (that will be involved during the road)

Report and PRISM GIS tool: Scenarios and forecasts

Result from Task 7.1: Report includingspatial determination of quantities and qualities of current and future plastic and bio waste streams in the tri-lateral ARRRA region

JOINT CCRI deliverable - SYSCHEMIQ Policy briefs and guidelines on the circular systemic solutions adopted, including their strengths and weaknesses experienced

Result from Task 8.5 and 8.6: Report with SWOT of SyschemiQ innovations, and proposed governance actions, including results and learning experiences from DTG workshop in M18, and coordinated with clustering activities (other EU funded projects and CCRI), as a basis for dissemination and further replication of the SyschemiQ learning experiences towards other regional innovation eco-systems (as mapped under D8.5). Targeted audience will be regional policy makers (policy feedback), and other stakeholders (industry, research and civil society organisations) in line with the Dual Track Governance concept, as well as national and European policy makers dealing with circular economy. To be confirmed during the project. This deliverable will describe potential synergies and joint achievements with the project TREASOURCE which is issued from the same topic (CIRCBIO-01-01). The nature of the joint work will be further defined during the project but may include joint policy feedback such as policy brief or white paper.

An empirical research article based on the field experiments

Result from Task 4.3: Article describing behavioural insights to identify effective behavioural levers to stimulate citizens to engage in smart recycling, and the impact on environmental spill

Demonstrators, pilots, prototypes (2)

Showcase products available based on PCR PP

Results of Task 2.3: Demo products based on PCR resulting from Tasks 2.1

Local plastic re-use, collection and separation experiment and awareness program (including digital coin remuneration programme)

Result from Task 4.2: Report on awareness program aimed at environmental savvy consumers and benchmarking of the existing social circular practices around plastics.

Websites, patent fillings, videos etc. (1)

Communication Plan and report V1.0

Result from Task 8.2 : Report to outline plans for communication ongoing the implementation of the project : this will include amongst others project identify, website and materials, (online) events, webinars, and meetings, regional (media) communication campaign to support transition in the tri-lateral region and Chemelot Circular Hub initiatives on introducing large scale plastics recycling and scientific Publications

Veröffentlichungen

Peer reviewed articles (3)

Plastic recycling stripped naked – from circular product to circular industry with recycling cascade

Autoren: Jean‐Paul Lange, Sascha R. A. Kersten, Steven De Meester, Marcel C. P. van Eijk, Kim Ragaert
Veröffentlicht in: ChemSusChem, Ausgabe 17, 2024, ISSN 1864-5631
Herausgeber: Wiley
DOI: 10.1002/CSSC.202301320

Perceptions and alignment on quality along the circular plastics packaging material chain

Autoren: Merel Molenbuur, Marcel C.P. van Eijk, Jan Harm Urbanus, Henk Diepenmaat, Kim Ragaert
Veröffentlicht in: Waste Management, Ausgabe 200, 2025, ISSN 0956-053X
Herausgeber: Elsevier BV
DOI: 10.1016/J.WASMAN.2025.114758

Monitoring Antioxidant Consumption and Build-Up in Polypropylene During Open-Loop and Closed-Loop Mechanical Recycling

Autoren: Niek Knoben, Max Vanhouttem, Aike Wypkema, Nithya Subramanian
Veröffentlicht in: Materials, Ausgabe 18, 2025, ISSN 1996-1944
Herausgeber: MDPI AG
DOI: 10.3390/MA18071640