Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch Deutsch
CORDIS - Forschungsergebnisse der EU
CORDIS

Boosting the surface quality and geometric accuracy in laser additive manufacturing via a novel data-driven control system design

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Communication, Dissemination & Outreach Plan (öffnet in neuem Fenster)

The plan describes the planned measures to maximize the impact of the project, including the dissemination and exploitation measures that are planned, and the target group(s) addressed. Regarding communication measures and public engagement strategy, the aim is to inform and reach out to society and show the activities performed, and the use and the benefits the project will have for citizens.

Data Management Plan (öffnet in neuem Fenster)

The Data Management Plan describes the data management life cycle for all data sets that will be collected, processed or generated by the action. It is a document describing what data will be collected, processed or generated and following what methodology and standards, whether and how this data will be shared and/or made open, and how it will be curated and preserved.

Veröffentlichungen

IEEE Access (öffnet in neuem Fenster)

Autoren: Mohammad Abuabiah; Vito Cerone; Simone Pirrera; Diego Regruto
Veröffentlicht in: IEEE Access, 2023, ISSN 2169-3536
Herausgeber: IEEE
DOI: 10.1109/ACCESS.2023.3329070

Materials (öffnet in neuem Fenster)

Autoren: Mohammad Abuabiah; Natago Guilé Mbodj; Bahaa Shaqour; Luqman Herzallah; Adel Juaidi; Ramez Abdallah; Peter Plapper
Veröffentlicht in: Materials, Vol 16, Iss 5, p 2030 (2023), 2023, ISSN 1996-1944
Herausgeber: MDPI
DOI: 10.3390/ma16052030

Influence on the bead geometry in Laser Metal Deposition with wire

Autoren: Tizia Charlotte Weidemann; Mohammad Abuabiah; Bahaa Shaqour; Robin Day; Thomas Bergsa; Peter Plapper
Veröffentlicht in: Lasers in Manufacturing Conference 2023, 2023
Herausgeber: wlt.de

Suche nach OpenAIRE-Daten ...

Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten

Es liegen keine Ergebnisse vor

Mein Booklet 0 0