Description du projet
Exploiter le plein potentiel de la fabrication additive métallique dans les transports
La fabrication additive métallique (FAM) est une technologie essentielle de l’industrie 4.0 car elle constitue une méthode de traitement des composants métalliques respectueuse de l’environnement et efficace du point de vue des coûts et de l’énergie. Les traitements post-surface existants ont toutefois une incidence négative sur l’environnement, consomment de l’énergie, et la résistance à la corrosion qu’ils génèrent ne répond pas aux exigences en termes de durée de vie. Le projet SuMAM, relevant des Actions Marie Skłodowska-Curie, entend élaborer une méthodologie à usages multiples innovante qui permettra d’obtenir la meilleure résistance possible à la corrosion pendant l’impression. Cette démarche éliminera le besoin de recourir à un post-traitement. Elle créera des surfaces par traitement laser in situ et intégrera des additifs pendant l’impression. Des matériaux communs dans le secteur des transports seront utilisés, à savoir quatre alliages d’aluminium et un alliage d’acier inoxydable.
Objectif
Metal Additive Manufacturing (MAM), also known as 3D metal printing, has attracted a great deal of attention from scientists and industries due to its potential in the state-of-the-art production of complex-shaped designs in the transport industry. MAM is considered the fundamental technology for Industry 4.0 since it is a low-cost and energy-efficient processing method for metallic components with a minimal environmental impact. Nevertheless, the surface finishing of MAM components is uncontrolled during the fabrication, resulting in low corrosion-resistant components. So far, current post-surface treatments are non-eco-friendly, non-energy efficient, and the achieved corrosion resistance does not fulfil the service life requirements.
In this scenario, the main goal of the SuMAM project is to achieve the full exploitation of MAM in the transport industry following the European Green Deal. Namely, as a major innovation, we will develop an innovative All-in-one methodology to achieve the highest corrosion resistance during printing, removing the need for post-treatment. We will combine two approaches: surface creating by (i) in-situ laser processing and (ii) incorporation of additives during printing to control the surface without affecting the bulk properties of the final components. Our target materials are four aluminium alloys and one stainless steel, widely used materials in the transport industry.
This project is an outstanding opportunity for the fundamental advancement of MAM science by a technological and economically feasible methodology. The SuMAM project presents the best research scenario for Dr. Rubn Del Olmo Martnez (candidate) to further develop his scientific career. The SuMAM project is led by Prof. Dr. Ir. Iris de Graeve and Prof. Dr. Ir. Herman Terryn from the SURF research group of the Vrije Universiteit Brussel (VUB), with a proven outstanding track record in both academic and industrial sectors in the scope of the proposal.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- sciences naturellessciences chimiqueschimie inorganiquemétal pauvre
- sciences naturellessciences physiquesoptiquephysique des lasers
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Mots‑clés
Programme(s)
- HORIZON.1.2 - Marie Skłodowska-Curie Actions (MSCA) Main Programme
Appel à propositions
(s’ouvre dans une nouvelle fenêtre) HORIZON-MSCA-2021-PF-01
Voir d’autres projets de cet appelRégime de financement
HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European FellowshipsCoordinateur
1050 Bruxelles / Brussel
Belgique