Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

All-in-one surface methodology for corrosion protection in Metal Additive Manufacturing

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Data Management Plan (s’ouvre dans une nouvelle fenêtre)

The Data Management Plan describes the data management life cycle for all data sets that will be collected, processed or generated by the action. It is a document describing what data will be collected, processed or generated and following what methodology and standards, whether and how this data will be shared and/or made open, and how it will be curated and preserved.

Communication, Dissemination & Exploitation Plan (s’ouvre dans une nouvelle fenêtre)

The plan describes the planned measures to maximize the impact of the project, including the dissemination and exploitation measures that are planned, and the target group(s) addressed. Regarding communication measures and public engagement strategy, the aim is to inform and reach out to society and show the activities performed, and the use and the benefits the project will have for citizens.

Publications

Corrosion behavior of steel parts repaired using additive manufacturing: Overview and research perspective (s’ouvre dans une nouvelle fenêtre)

Auteurs: Marina Furbino, Rubén Del Olmo, Reynier I. Revilla, Iris De Graeve
Publié dans: Materials & Design, Numéro 252, 2025, ISSN 0264-1275
Éditeur: Elsevier BV
DOI: 10.1016/J.MATDES.2025.113769

Layered double hydroxides on additively manufactured Al–Si alloy: Growth mechanism, microstructure and corrosion performance (s’ouvre dans une nouvelle fenêtre)

Auteurs: Rubén del Olmo, Reynier I. Revilla, Francesco Andreatta, Iris De Graeve
Publié dans: Applied Surface Science, Numéro 710, 2025, ISSN 0169-4332
Éditeur: Elsevier BV
DOI: 10.1016/J.APSUSC.2025.163891

Corrosion behaviour of novel Al-Fe-Zr alloy developed for additive manufacturing (s’ouvre dans une nouvelle fenêtre)

Auteurs: Reynier I. Revilla, Rubén del Olmo, Kitty Baert, Ilya Ostrovsky, Loïc Malet, Stéphane Godet, Iris De Graeve
Publié dans: Corrosion Science, Numéro 257, 2026, ISSN 0010-938X
Éditeur: Elsevier BV
DOI: 10.1016/J.CORSCI.2025.113292

Role of non-metallic inclusions in the initiation and propagation of corrosion in wire arc additive manufactured low-alloy steel (s’ouvre dans une nouvelle fenêtre)

Auteurs: Marina Furbino, Rubén Del Olmo, Zhichao Che, Arshad Yazdanpanah, Loïc Malet, Stéphane Godet, Chao Liu, Reynier I. Revilla, Iris De Graeve
Publié dans: Corrosion Science, Numéro 259, 2026, ISSN 0010-938X
Éditeur: Elsevier BV
DOI: 10.1016/J.CORSCI.2025.113509

Microstructure and corrosion behaviour of 316L stainless steel deposited by laser-based directed energy deposition on wrought material: A post-mortem analysis bringing insights for coating and repair applications (s’ouvre dans une nouvelle fenêtre)

Auteurs: Meron Desalegn Tuemay, Reynier I. Revilla, Rubén Del Olmo, Zoé Jardon, Michaël Hinderdael, Iris De Graeve
Publié dans: Engineering Failure Analysis, Numéro 179, 2026, ISSN 1350-6307
Éditeur: Elsevier BV
DOI: 10.1016/J.ENGFAILANAL.2025.109815

Synergistic effects of etching and electropolishing on additively manufactured Ti-6Al-4V scaffolds for biomedical implants (s’ouvre dans une nouvelle fenêtre)

Auteurs: Ruben del Olmo, Reynier I. Revilla, Floriane Debuisson, Kitty Baert, Brecht Van Hooreweder, Anne des Rieux, Iris De Graeve, Ana Santos-Coquillat
Publié dans: Additive Manufacturing, Numéro 116, 2026, ISSN 2214-8604
Éditeur: Elsevier BV
DOI: 10.1016/J.ADDMA.2026.105083

Data Management Plan

New Trends in the Design of Biomaterials for 3D and 4D Printing (s’ouvre dans une nouvelle fenêtre)

Auteurs: Rubén del Olmo, Enrique Martínez-Campos, José Javier Relinque, Alberto Gallardo, Juan Rodríguez-Hernández, Endzhe Matykina, Ana Santos-Coquillat
Publié dans: Advances in Material Research and Technology, Advances in Biomaterials Research, 2025
Éditeur: Springer Nature Switzerland
DOI: 10.1007/978-3-031-97481-6_3

Recherche de données OpenAIRE...

Une erreur s’est produite lors de la recherche de données OpenAIRE

Aucun résultat disponible

Mon livret 0 0