Sustainable manufacturing and optimized materials and interfaces for lithium metal batteries with digital quality control

Información del proyecto

SOLiD

Identificador del acuerdo de subvención: 101069505

DOI

10.3030/101069505

Fecha de la firma de la CE 9 Junio 2022

Fecha de inicio 1 Septiembre 2022

Fecha de finalización 30 Abril 2027

Financiado con arreglo a

• Climate, Energy and Mobility

Coste total

€ 7 026 000,75

Aportación de la UE

€ 6 980 937,50

Coordinado por

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
Finland

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (5)

Ethics Plan

Related task T83 The document will contain guidelines and responsibilities which are related to ethics Main focus will be in the safety of cell production

Dissemination, communication, exploitation and networking action plan

Related tasks 71 and 72 This deliverable will contain a detailed plan for the dissemination communication exploitation and networking actions that will be performed in the project with measurable KPIs On the exploitation side a draft list of the Key Exploitable Results will be provided together with the partners involved

Project Quality Management Plan PQMP

Related tasks 81 and 82 Plan for financial and administrative management for the project Descriptions how the project is coordinated in terms of project documents and their quality monitoring the project progress and management of risks

Interim report on performed dissemination, communication and networking activities

Related tasks 7.1 and 7.2. This deliverable will report all dissemination, communication and networking activities performed during the first 2 years of the project, together with benchmarking towards the pre-defined KPIs. If needed, the plan submitted under D7.1 will be modified and adjusted based on the evaluation of the performed actions.

Risk assessment for materials and coating processes

Related tasks 3.1, 3.2 and 3.3. Evaluation and selection of cathode and electrolyte materials based on their risks for coating processes, human and environment.

Demonstrators, pilots, prototypes (1)

EIS-based roll-to-roll inline inspection demonstrator and validation

Related task 5.2. Report of the developed roll-to-roll equipment and setup description for EIS-analysis. Results and suitability evaluation of EIS inspection for battery manufacturing.

Publicaciones

Conference proceedings (1)

Extrusion coating as a tool for sustainable solid-state battery manufacturing

Autores: Vilkman, Marja; Pechancová, Viera; Mousavi, Sam; Mosallaei, Milad; Paul, Debashri; Obrezkov, Filipp
Publicado en: 2024
Editor: ZENODO
DOI: 10.5281/ZENODO.14056673

Peer reviewed articles (4)

Atomic layer deposition for protecting lithium metal anodes to high-voltage battery applications

Autores: Sara Pakseresht, Ville Miikkulainen, Filipp A. Obrezkov, Ahmed Waleed Majeed Al-Ogaili, Jouko Lahtinen, Tanja Kallio
Publicado en: Journal of Power Sources, Edición 653, 2025, ISSN 0378-7753
Editor: Elsevier BV
DOI: 10.1016/J.JPOWSOUR.2025.237731

Impact of powder and electrode ALD coatings on the performance of intercalation cathodes for lithium–ion batteries

Autores: Princess Stephanie Llanos, Alisa R. Bogdanova, Filipp Obrezkov, Nastaran Farrahi, Tanja Kallio
Publicado en: Energy Advances, Edición 4, 2025, ISSN 2753-1457
Editor: Royal Society of Chemistry (RSC)
DOI: 10.1039/D4YA00583J

Tuning the properties of LiNi0.8Mn0.1Co0.1O2 via atomic layer deposition using different synthetic stages

Autores: Alisa R. Bogdanova, Filipp A. Obrezkov, Anna A. Kobets, Xiangze Kong, Ville Miikkulainen, Jouko Lahtinen, Lide Yao, Hua Jiang, Tanja Kallio
Publicado en: Journal of Energy Chemistry, Edición 110, 2025, ISSN 2095-4956
Editor: Elsevier BV
DOI: 10.1016/J.JECHEM.2025.06.056

SOLiD: building a sustainable future for high-performance solid-state lithium-metal batteries

Autores: Mari Ylikunnari
Publicado en: The Project Repository Journal, Edición 24, 2025, ISSN 2632-4067
Editor: European Dissemination Media Agency Limited
DOI: 10.54050/PRJ2423601