Sustainable manufacturing and optimized materials and interfaces for lithium metal batteries with digital quality control

Informations projet

SOLiD

N° de convention de subvention: 101069505

DOI

10.3030/101069505

Date de signature de la CE 9 Juin 2022

Date de début 1 Septembre 2022

Date de fin 30 Avril 2027

Financé au titre de

• Climate, Energy and Mobility

Coût total

€ 7 026 000,75

Contribution de l’UE

€ 6 980 937,50

Coordonné par

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
Finland

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Documents, reports (5)

Ethics Plan

Related task T83 The document will contain guidelines and responsibilities which are related to ethics Main focus will be in the safety of cell production

Dissemination, communication, exploitation and networking action plan

Related tasks 71 and 72 This deliverable will contain a detailed plan for the dissemination communication exploitation and networking actions that will be performed in the project with measurable KPIs On the exploitation side a draft list of the Key Exploitable Results will be provided together with the partners involved

Project Quality Management Plan PQMP

Related tasks 81 and 82 Plan for financial and administrative management for the project Descriptions how the project is coordinated in terms of project documents and their quality monitoring the project progress and management of risks

Interim report on performed dissemination, communication and networking activities

Related tasks 7.1 and 7.2. This deliverable will report all dissemination, communication and networking activities performed during the first 2 years of the project, together with benchmarking towards the pre-defined KPIs. If needed, the plan submitted under D7.1 will be modified and adjusted based on the evaluation of the performed actions.

Risk assessment for materials and coating processes

Related tasks 3.1, 3.2 and 3.3. Evaluation and selection of cathode and electrolyte materials based on their risks for coating processes, human and environment.

Demonstrators, pilots, prototypes (1)

EIS-based roll-to-roll inline inspection demonstrator and validation

Related task 5.2. Report of the developed roll-to-roll equipment and setup description for EIS-analysis. Results and suitability evaluation of EIS inspection for battery manufacturing.

Publications

Conference proceedings (1)

Extrusion coating as a tool for sustainable solid-state battery manufacturing

Auteurs: Vilkman, Marja; Pechancová, Viera; Mousavi, Sam; Mosallaei, Milad; Paul, Debashri; Obrezkov, Filipp
Publié dans: 2024
Éditeur: ZENODO
DOI: 10.5281/ZENODO.14056673

Peer reviewed articles (4)

Atomic layer deposition for protecting lithium metal anodes to high-voltage battery applications

Auteurs: Sara Pakseresht, Ville Miikkulainen, Filipp A. Obrezkov, Ahmed Waleed Majeed Al-Ogaili, Jouko Lahtinen, Tanja Kallio
Publié dans: Journal of Power Sources, Numéro 653, 2025, ISSN 0378-7753
Éditeur: Elsevier BV
DOI: 10.1016/J.JPOWSOUR.2025.237731

Impact of powder and electrode ALD coatings on the performance of intercalation cathodes for lithium–ion batteries

Auteurs: Princess Stephanie Llanos, Alisa R. Bogdanova, Filipp Obrezkov, Nastaran Farrahi, Tanja Kallio
Publié dans: Energy Advances, Numéro 4, 2025, ISSN 2753-1457
Éditeur: Royal Society of Chemistry (RSC)
DOI: 10.1039/D4YA00583J

Tuning the properties of LiNi0.8Mn0.1Co0.1O2 via atomic layer deposition using different synthetic stages

Auteurs: Alisa R. Bogdanova, Filipp A. Obrezkov, Anna A. Kobets, Xiangze Kong, Ville Miikkulainen, Jouko Lahtinen, Lide Yao, Hua Jiang, Tanja Kallio
Publié dans: Journal of Energy Chemistry, Numéro 110, 2025, ISSN 2095-4956
Éditeur: Elsevier BV
DOI: 10.1016/J.JECHEM.2025.06.056

SOLiD: building a sustainable future for high-performance solid-state lithium-metal batteries

Auteurs: Mari Ylikunnari
Publié dans: The Project Repository Journal, Numéro 24, 2025, ISSN 2632-4067
Éditeur: European Dissemination Media Agency Limited
DOI: 10.54050/PRJ2423601