Sustainable manufacturing and optimized materials and interfaces for lithium metal batteries with digital quality control

Informazioni relative al progetto

SOLiD

ID dell’accordo di sovvenzione: 101069505

DOI

10.3030/101069505

Data della firma CE 9 Giugno 2022

Data di avvio 1 Settembre 2022

Data di completamento 30 Aprile 2027

Finanziato da

• Climate, Energy and Mobility

Costo totale

€ 7 026 000,75

Contributo UE

€ 6 980 937,50

Coordinato da

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
Finland

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (5)

Ethics Plan

Related task T83 The document will contain guidelines and responsibilities which are related to ethics Main focus will be in the safety of cell production

Dissemination, communication, exploitation and networking action plan

Related tasks 71 and 72 This deliverable will contain a detailed plan for the dissemination communication exploitation and networking actions that will be performed in the project with measurable KPIs On the exploitation side a draft list of the Key Exploitable Results will be provided together with the partners involved

Project Quality Management Plan PQMP

Related tasks 81 and 82 Plan for financial and administrative management for the project Descriptions how the project is coordinated in terms of project documents and their quality monitoring the project progress and management of risks

Interim report on performed dissemination, communication and networking activities

Related tasks 7.1 and 7.2. This deliverable will report all dissemination, communication and networking activities performed during the first 2 years of the project, together with benchmarking towards the pre-defined KPIs. If needed, the plan submitted under D7.1 will be modified and adjusted based on the evaluation of the performed actions.

Risk assessment for materials and coating processes

Related tasks 3.1, 3.2 and 3.3. Evaluation and selection of cathode and electrolyte materials based on their risks for coating processes, human and environment.

Demonstrators, pilots, prototypes (1)

EIS-based roll-to-roll inline inspection demonstrator and validation

Related task 5.2. Report of the developed roll-to-roll equipment and setup description for EIS-analysis. Results and suitability evaluation of EIS inspection for battery manufacturing.

Pubblicazioni

Peer reviewed articles (6)

Protecting Lithium Metal Electrode With Titanium Based Interphase: Synthesis and Battery Performance

Autori: Sara Pakseresht, Ville Miikkulainen, Manoj Ghosalya, Esko Kokkonen, Jani Sainio, Xiangze Kong, Samuli Urpelainen, Tanja Kallio
Pubblicato in: Small Structures, Numero 7, 2026, ISSN 2688-4062
Editore: Wiley
DOI: 10.1002/SSTR.202500858

Regional variations in environmental impacts of NMC 811 production: Comparative LCA study across Visegrad countries

Autori: Thaiskang Jamatia, Viera Pechancová, Debashri Paul, Jens Buchgeister, Manuel Baumann, Hüseyin Ersoy, Merve Erakca, Petr Saha
Pubblicato in: iScience, Numero 29, 2026, ISSN 2589-0042
Editore: Elsevier BV
DOI: 10.1016/J.ISCI.2026.115110

Atomic layer deposition for protecting lithium metal anodes to high-voltage battery applications

Autori: Sara Pakseresht, Ville Miikkulainen, Filipp A. Obrezkov, Ahmed Waleed Majeed Al-Ogaili, Jouko Lahtinen, Tanja Kallio
Pubblicato in: Journal of Power Sources, Numero 653, 2025, ISSN 0378-7753
Editore: Elsevier BV
DOI: 10.1016/J.JPOWSOUR.2025.237731

Impact of powder and electrode ALD coatings on the performance of intercalation cathodes for lithium–ion batteries

Autori: Princess Stephanie Llanos, Alisa R. Bogdanova, Filipp Obrezkov, Nastaran Farrahi, Tanja Kallio
Pubblicato in: Energy Advances, Numero 4, 2025, ISSN 2753-1457
Editore: Royal Society of Chemistry (RSC)
DOI: 10.1039/D4YA00583J

Tuning the properties of LiNi0.8Mn0.1Co0.1O2 via atomic layer deposition using different synthetic stages

Autori: Alisa R. Bogdanova, Filipp A. Obrezkov, Anna A. Kobets, Xiangze Kong, Ville Miikkulainen, Jouko Lahtinen, Lide Yao, Hua Jiang, Tanja Kallio
Pubblicato in: Journal of Energy Chemistry, Numero 110, 2025, ISSN 2095-4956
Editore: Elsevier BV
DOI: 10.1016/J.JECHEM.2025.06.056

SOLiD: building a sustainable future for high-performance solid-state lithium-metal batteries

Autori: Mari Ylikunnari
Pubblicato in: The Project Repository Journal, Numero 24, 2025, ISSN 2632-4067
Editore: European Dissemination Media Agency Limited
DOI: 10.54050/PRJ2423601

Conference proceedings (1)

Extrusion coating as a tool for sustainable solid-state battery manufacturing

Autori: Vilkman, Marja; Pechancová, Viera; Mousavi, Sam; Mosallaei, Milad; Paul, Debashri; Obrezkov, Filipp
Pubblicato in: 2024
Editore: ZENODO
DOI: 10.5281/ZENODO.14056673