Descrizione del progetto
Il carbone biologico può rendere le acciaierie più ecologiche
Le acciaierie e gli impianti metallurgici rappresentano una sfida significativa per il raggiungimento della neutralità in termini di emissioni di carbonio. Il progetto H2STEEL, finanziato dall’UE, spera di offrire una soluzione convertendo i rifiuti organici e il biometano in idrogeno verde, carbonio e materie prime essenziali attraverso un nuovo tipo di pirolisi catalizzata. Utilizzando un reattore di nuova concezione che impiega un nuovo catalizzatore, il biometano può essere convertito in idrogeno verde a basso costo. I materiali derivati possono poi essere utilizzati nei processi di produzione dell’acciaio. Questa soluzione innovativa evita il rilascio di CO2 e comporta una riduzione netta dei gas serra.
Obiettivo
The achievement of the Net-zero emissions target established by the European Commission is huge challenge which could not be achieved without re-thinking the conventional route (materials and energy chains). H2STEEL project proposes an innovative, disruptive solution to convert wet waste streams into green Hydrogen, Carbon and Critical Raw Materials. The proposed innovative solution aims at supporting the green transition of one of the most hard-to-abate industrial sector: metallurgy. In particular, H2STEEL combines the conversion of biowaste and bioCH4 through innovative catalyzed pyrolysis with chemical leaching, to fully convert biowastes into Green Hydrogen, Green Carbon (biocoal), and recovery of Critical (inorganic) Raw Materials. Biomethane pyrolysis is carried out in a brand new, ad-hoc designed, and proof-of-concept reactor, on a bed of biocoal made from pre-carbonized biowastes, i.e. on a very cheap fully carbon-based catalyst, very resistant to temperature and contaminants: this will enhance the efficiency of the methane cracking step to generate Green Hydrogen. As new solid carbon from methane cracking is generated on the biocoal surface, thus reducing the performance of the catalyst, new biocoal-catalyst is inserted in the reactor, while the spent biocoal is removed: the continuous renewal of the catalyst is feasible thanks to its low cost, and to the market value of the spent catalyst. This material, fully bio-carbon based, is then used in steel-making as a substitute of metallurgical (fossil) coke, generating a net GHG reduction, EU ETS (Emission Trading Scheme) compliant. The regeneration of the spent catalyst thus becomes unnecessary, as the biocoal is used in a downstream process, avoiding the release of CO2 in atmosphere (as it happens in the SMR process or in most of the catalysts regeneration steps).
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- scienze naturaliscienze chimichecatalisi
- scienze naturaliscienze chimichechimica organicacomposti alifatici
- ingegneria e tecnologiaingegneria dei materialimetallurgia
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Parole chiave
Programma(i)
- HORIZON.3.1 - The European Innovation Council (EIC) Main Programme
Argomento(i)
Invito a presentare proposte
(si apre in una nuova finestra) HORIZON-EIC-2021-PATHFINDERCHALLENGES-01
Vedi altri progetti per questo bandoMeccanismo di finanziamento
HORIZON-EIC - HORIZON EIC GrantsCoordinatore
10129 Torino
Italia