CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
Quality management plan M03 LIST This deliverable will present the project quality control strategy and a peer review system that will be followed towards all project deliverables and procedures
Existing mobility needs, road infrastructure and governance models (se abrirá en una nueva ventana)Existing mobility needs road infrastructure and governance models M06 ICCS It is the output of T21 T22 and T23 review the existing literature and projects about mobility needs concerns and expectations of European citizens and vulnerable user groups reviews the needs and requirements of relevant and important stakeholders eg policy makers authorities fleet and traffic operators etc towards the integration of CCAM solutions analyses the road infrastructure traffic rules and governance models for traffic management in relation with CCAM technologies and services
Study questions and KPIs of CCAM ecosystem (se abrirá en una nueva ventana)Study questions impact areas and KPIs of CCAM ecosystem M8 ICCS It is the output of T24 and will present the study questions and the KPIs to be used in the analyses of WP5
CCAM advanced simulation models and digital twin designs (se abrirá en una nueva ventana)CCAM advanced simulation models and digital twin designs. M21 [OKAN] – The document will provide advanced simulation models and digital twins for each related LL (output of T3.5).
Mobility network load balancing solutions (se abrirá en una nueva ventana)Mobility network load balancing solutions. M21 [GLS] – The document defines the architecture, algorithms, methods, APIs necessary for the integration of mobility network load balancing systems with traffic management solutions for each LL (output of T3.3).
Impact assessment methodology (se abrirá en una nueva ventana)Impact assessment methodology. M21 [OKAN] This deliverable is the output of T5.1 and will report the methodology and framework to evaluate the impact of the CCAM solutions all the LLs.
Use cases definition (se abrirá en una nueva ventana)Use cases definition M08 GLS It is the output of T25 and will present the use cases to be deployed in the LLs The defined use cases will be compared between LLs in order to find overlaps and propose an interoperability framework based on open standards best suited for the use cases and features defined in WP2
Project management plan - First update (se abrirá en una nueva ventana)Project management plan M06 POLIBA This deliverable will include a first schedule per task responsible partner related subtasks related deliverables and dependencies on other tasks a Gantt chart and a Work Breakdown Structure
Exploitation plans - First update (se abrirá en una nueva ventana)Exploitation plans. M18 - [TTS]. The document will include the project exploitation strategy and provide concrete Exploitation Plans. It will include, for each result with the highest market potential: stakeholders involved, resources needed, potential risks and barriers and actions required to exploit them beyond the project lifetime.
Liaison plan (se abrirá en una nueva ventana)Liaison plan M8 ERTICO Gathers a list of organisations initiatives and projects concluded and ongoing which would represent a benefit in the project successful implementation Specific methodologies and timing on how and when they will be involved will be included in a timeline The timeline will be based on the milestones and progresses of the project It is an output of T71
Data Management Plan - Second update (se abrirá en una nueva ventana)Data Management Plan – M18 [UBI] This deliverable will present the updated procedures and strategy to be followed in IN2CCAM for data handing and to ensure that its research data is findable, accessible, interoperable and reusable. It will include the principles for data processing, the security measures to be implemented and the informed consent procedures in regards to data processing, especially as regards tracking. This deliverable is an update of D1.4.
IN2CCAM public engagement strategy (se abrirá en una nueva ventana)IN2CCAM public engagement strategy M08 TTS It will provide the Public Engagement Strategy of IN2CCAM including objectives key target groups existing concerns knowledge and awareness level of CCAM messages that will be communicated channels and tools for engagement timeline and roles of partners
Project management plan - Second update (se abrirá en una nueva ventana)Project management plan – M18 [POLIBA] This deliverable will include a second schedule per task, responsible partner related subtasks, related deliverables, and dependencies on other tasks, a Gantt chart and a Work Breakdown Structure. This deliverable is an update of D1.1.
CCAM services architecture description (se abrirá en una nueva ventana)CCAM services architecture description. M21 [AKKA] - The document defines the elements of the CCAM services architecture, providing the basis for the technical innovations and developments of WP3 and the reference for the integrations of the LLs (output of T3.1).
Optimization of multimodal mobility services and goods management and delivery systems (se abrirá en una nueva ventana)Optimization of multimodal mobility services and goods management and delivery systems. M21 [VTT] – The document will provide descriptions of the individual and integrated mobility service offering and means and results of the service optimization at LLs (output of T3.2 and T3.4).
Data Management Plan - First update (se abrirá en una nueva ventana)Data Management Plan M06 UBI This deliverable will present the procedures and strategy to be followed in IN2CCAM for data handing and to ensure that its research data is findable accessible interoperable and reusable It will include the principles for data processing the security measures to be implemented and the informed consent procedures in regards to data processing especially as regards tracking
Innovation management plan (se abrirá en una nueva ventana)Innovation management plan M06 POLIBA It will present the IN2CCAM innovation results and will detail the innovations technical coherence and implementation opportunities with respect to the planned progress It will include an assessment of possible technical risks and means of preventing them It will describe the exploitation activities needed to exploit the project results
Dissemination and Communication plan - First update (se abrirá en una nueva ventana)Dissemination and Communication plan M4 ERTICO A living document which describes the overall dissemination and communication strategy All dissemination and communications efforts will be reported in the periodic reports
Dissemination and Communication plan - Second update (se abrirá en una nueva ventana)Dissemination and Communication plan. M18 - [ERTICO]. A living document, which describes the overall dissemination and communication strategy. All dissemination and communications efforts will be reported in the periodic reports. This deliverable is an update od D7.1
Publicaciones
Autores:
Esmaeil Abbasi, Ahmad; Mangini, Agostino Marcello; Fanti, Maria Pia
Publicado en:
Electronics, 2024, ISSN 2079-9292
Editor:
MDPI
DOI:
10.3390/ELECTRONICS13183661
Autores:
Javad, Sadeghi; Cristiana, Botta; Brunella, Caroleo; Maurizio, Arnone
Publicado en:
Urban Science, 2025, ISSN 2413-8851
Editor:
MDPI
DOI:
10.3390/URBANSCI9100409
Autores:
Ruotian Liu, Agostino Marcello Mangini, Maria Pia Fanti
Publicado en:
IEEE/CAA Journal of Automatica Sinica, Edición 12, 2025, ISSN 2329-9266
Editor:
Institute of Electrical and Electronics Engineers (IEEE)
DOI:
10.1109/JAS.2025.125156
Autores:
Wasim A. Ali, Michele Roccotelli, Gennaro Boggia, Maria Pia Fanti
Publicado en:
Information Security Journal: A Global Perspective, Edición 33, 2024, ISSN 1939-3555
Editor:
Informa UK Limited
DOI:
10.1080/19393555.2024.2307638
Autores:
Maria del Cacho Estil-les, Maria Pia Fanti, Walter Ukovich
Publicado en:
International Journal of Business Management and Finance Research, Edición 8, 2025, ISSN 2641-5313
Editor:
Academia Publishing Group
DOI:
10.53935/26415313.V8I2.358
Autores:
Regis Decorme; Sébastien Faye; Monique Calisti; Simon Pryor; Indrakshi Dey; Maria Pia Fanti; Francesco Malandrino; Chiara Lombardo
Publicado en:
Open Research Europe, 2024, ISSN 2732-5121
Editor:
European Commission
DOI:
10.12688/OPENRESEUROPE.18767.1
Autores:
Volpe, Gaetano; Mangini, Agostino Marcello; Fanti, Maria Pia
Publicado en:
2023 IEEE 19th International Conference on Automation Science and Engineering (CASE), 2023, ISSN 2161-8089
Editor:
IEEE
DOI:
10.1109/CASE56687.2023.10260615
Autores:
Maria Asuncion del Cacho Estil-Les, Agostino Marcello Mangini, Michele Roccotelli, Maria Pia Fanti
Publicado en:
IEEE Transactions on Intelligent Transportation Systems, Edición 26, 2025, ISSN 1524-9050
Editor:
Institute of Electrical and Electronics Engineers (IEEE)
DOI:
10.1109/TITS.2025.3529181
Autores:
Wei Duan, Ruotian Liu, Maria Pia Fanti, Christoforos N. Hadjicostis, Zhiwu Li
Publicado en:
IEEE Control Systems Letters, Edición 7, 2023, ISSN 2475-1456
Editor:
Institute of Electrical and Electronics Engineers (IEEE)
DOI:
10.1109/LCSYS.2023.3284340
Autores:
Selim Dündar, Sina Alp, İrem Merve Ulu, Onur Dursun
Publicado en:
Sustainability, Edición 17, 2025, ISSN 2071-1050
Editor:
MDPI AG
DOI:
10.3390/SU17198948
Autores:
Sina Alp, Selim Dündar
Publicado en:
2024 Innovations in Intelligent Systems and Applications Conference (ASYU), 2025
Editor:
IEEE
DOI:
10.1109/ASYU62119.2024.10757118
Autores:
A. Krendeleva, G. Rotunno, W. Ukovich, M. P. Fanti
Publicado en:
2023, ISSN 2305-2023
Editor:
EMSS 2023
DOI:
10.46354/I3M.2023.EMSS.025
Autores:
Michele Roccotelli, Gaetano Volpe, Maria Pia Fanti, Agostino Marcello Mangini
Publicado en:
2024 IEEE 20th International Conference on Automation Science and Engineering (CASE), 2024
Editor:
IEEE
DOI:
10.1109/CASE59546.2024.10711495
Autores:
Juan C. Estrada-Jiménez, Valdemar R. Farré-Guijarro, Diana C. Alvarez-Paredes, Marie-Laure Watrinet
Publicado en:
2024 IEEE 35th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC), 2025
Editor:
IEEE
DOI:
10.1109/PIMRC59610.2024.10817462
Autores:
Maria A. del Cacho Estil-les, Wasim A. Ali, Maria Pia Fanti, Mario Binetti, Agostino M. Mangini
Publicado en:
2024 IEEE 20th International Conference on Automation Science and Engineering (CASE), 2024
Editor:
IEEE
DOI:
10.1109/CASE59546.2024.10711407
Autores:
Francesco Paparella, Giuseppe Olivieri, Gaetano Volpe, Agostino Marcello Mangini, Maria Pia Fanti
Publicado en:
2024 IEEE International Conference on Systems, Man, and Cybernetics (SMC), 2025
Editor:
IEEE
DOI:
10.1109/SMC54092.2024.10831232
Autores:
Oussema Gharsallaoui, Damien Nicolas, Marie-Laure Watrinet, Ion Turcanu
Publicado en:
2024 6th Conference on Blockchain Research & Applications for Innovative Networks and Services (BRAINS), 2024
Editor:
IEEE
DOI:
10.1109/BRAINS63024.2024.10732466
Autores:
Antonio Salcuni, Gaetano Volpe, Agostino Marcello Mangini, Maria Pia Fanti
Publicado en:
2025 IEEE 21st International Conference on Automation Science and Engineering (CASE), 2025
Editor:
IEEE
DOI:
10.1109/CASE58245.2025.11164075
Publicado en:
Proceedings of the 35th European Modeling & Simulation Symposium, EMSS, 2023
DOI:
10.46354/I3M.2023.EMSS.025
Autores:
F. Paparella, G. Volpe, A. M. Mangini and M. P. Fanti
Publicado en:
2023, ISBN 979-8-3503-3702-0
Editor:
IEEE
DOI:
10.5281/zenodo.12623416
Autores:
Paparella F.; Volpe G.; Mangini A. M.; Fanti M. P.
Publicado en:
2023 IEEE International Conference on Systems, Man, and Cybernetics (SMC), 2023
DOI:
10.1109/SMC53992.2023.10394341
Autores:
Giuseppe Olivieri, Gaetano Volpe, Agostino Marcello Mangini, Maria Pia Fanti
Publicado en:
2024 10th International Conference on Control, Decision and Information Technologies (CoDIT), 2024
Editor:
IEEE
DOI:
10.1109/CODIT62066.2024.10708500
Autores:
Silvestri, Bartolomeo; Ranieri, Luigi; Fanti, Maria Pia; Mangini, Agostino Marcello; Krendeleva, Angelina
Publicado en:
2025
Editor:
AIDI
Autores:
Tarkiainen, Mikko; Kauvo, Kimmo; Aittoniemi, Elina
Publicado en:
IEEE 20th International Conference on Automation Science and Engineering, Bari, Italy., 2024
Editor:
IEEE RAS
Publicado en:
Proceedings of the 35th European Modeling & Simulation Symposium, EMSS, 2023
Editor:
CAL-TEK srl
DOI:
10.46354/I3M.2023.EMSS.021
Autores:
G. Volpe, A. M. Mangini and M. P. Fanti
Publicado en:
2023, ISBN 979-8-3503-2069-5
Editor:
IEEE CASE
DOI:
10.5281/zenodo.12544068
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles