CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.
Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .
Rezultaty
Quality management plan M03 LIST This deliverable will present the project quality control strategy and a peer review system that will be followed towards all project deliverables and procedures
Existing mobility needs, road infrastructure and governance models (odnośnik otworzy się w nowym oknie)Existing mobility needs road infrastructure and governance models M06 ICCS It is the output of T21 T22 and T23 review the existing literature and projects about mobility needs concerns and expectations of European citizens and vulnerable user groups reviews the needs and requirements of relevant and important stakeholders eg policy makers authorities fleet and traffic operators etc towards the integration of CCAM solutions analyses the road infrastructure traffic rules and governance models for traffic management in relation with CCAM technologies and services
Study questions and KPIs of CCAM ecosystem (odnośnik otworzy się w nowym oknie)Study questions impact areas and KPIs of CCAM ecosystem M8 ICCS It is the output of T24 and will present the study questions and the KPIs to be used in the analyses of WP5
CCAM advanced simulation models and digital twin designs (odnośnik otworzy się w nowym oknie)CCAM advanced simulation models and digital twin designs. M21 [OKAN] – The document will provide advanced simulation models and digital twins for each related LL (output of T3.5).
Mobility network load balancing solutions (odnośnik otworzy się w nowym oknie)Mobility network load balancing solutions. M21 [GLS] – The document defines the architecture, algorithms, methods, APIs necessary for the integration of mobility network load balancing systems with traffic management solutions for each LL (output of T3.3).
Impact assessment methodology (odnośnik otworzy się w nowym oknie)Impact assessment methodology. M21 [OKAN] This deliverable is the output of T5.1 and will report the methodology and framework to evaluate the impact of the CCAM solutions all the LLs.
Use cases definition (odnośnik otworzy się w nowym oknie)Use cases definition M08 GLS It is the output of T25 and will present the use cases to be deployed in the LLs The defined use cases will be compared between LLs in order to find overlaps and propose an interoperability framework based on open standards best suited for the use cases and features defined in WP2
Project management plan - First update (odnośnik otworzy się w nowym oknie)Project management plan M06 POLIBA This deliverable will include a first schedule per task responsible partner related subtasks related deliverables and dependencies on other tasks a Gantt chart and a Work Breakdown Structure
Exploitation plans - First update (odnośnik otworzy się w nowym oknie)Exploitation plans. M18 - [TTS]. The document will include the project exploitation strategy and provide concrete Exploitation Plans. It will include, for each result with the highest market potential: stakeholders involved, resources needed, potential risks and barriers and actions required to exploit them beyond the project lifetime.
Liaison plan (odnośnik otworzy się w nowym oknie)Liaison plan M8 ERTICO Gathers a list of organisations initiatives and projects concluded and ongoing which would represent a benefit in the project successful implementation Specific methodologies and timing on how and when they will be involved will be included in a timeline The timeline will be based on the milestones and progresses of the project It is an output of T71
Data Management Plan - Second update (odnośnik otworzy się w nowym oknie)Data Management Plan – M18 [UBI] This deliverable will present the updated procedures and strategy to be followed in IN2CCAM for data handing and to ensure that its research data is findable, accessible, interoperable and reusable. It will include the principles for data processing, the security measures to be implemented and the informed consent procedures in regards to data processing, especially as regards tracking. This deliverable is an update of D1.4.
IN2CCAM public engagement strategy (odnośnik otworzy się w nowym oknie)IN2CCAM public engagement strategy M08 TTS It will provide the Public Engagement Strategy of IN2CCAM including objectives key target groups existing concerns knowledge and awareness level of CCAM messages that will be communicated channels and tools for engagement timeline and roles of partners
Project management plan - Second update (odnośnik otworzy się w nowym oknie)Project management plan – M18 [POLIBA] This deliverable will include a second schedule per task, responsible partner related subtasks, related deliverables, and dependencies on other tasks, a Gantt chart and a Work Breakdown Structure. This deliverable is an update of D1.1.
CCAM services architecture description (odnośnik otworzy się w nowym oknie)CCAM services architecture description. M21 [AKKA] - The document defines the elements of the CCAM services architecture, providing the basis for the technical innovations and developments of WP3 and the reference for the integrations of the LLs (output of T3.1).
Optimization of multimodal mobility services and goods management and delivery systems (odnośnik otworzy się w nowym oknie)Optimization of multimodal mobility services and goods management and delivery systems. M21 [VTT] – The document will provide descriptions of the individual and integrated mobility service offering and means and results of the service optimization at LLs (output of T3.2 and T3.4).
Data Management Plan - First update (odnośnik otworzy się w nowym oknie)Data Management Plan M06 UBI This deliverable will present the procedures and strategy to be followed in IN2CCAM for data handing and to ensure that its research data is findable accessible interoperable and reusable It will include the principles for data processing the security measures to be implemented and the informed consent procedures in regards to data processing especially as regards tracking
Innovation management plan (odnośnik otworzy się w nowym oknie)Innovation management plan M06 POLIBA It will present the IN2CCAM innovation results and will detail the innovations technical coherence and implementation opportunities with respect to the planned progress It will include an assessment of possible technical risks and means of preventing them It will describe the exploitation activities needed to exploit the project results
Dissemination and Communication plan - First update (odnośnik otworzy się w nowym oknie)Dissemination and Communication plan M4 ERTICO A living document which describes the overall dissemination and communication strategy All dissemination and communications efforts will be reported in the periodic reports
Dissemination and Communication plan - Second update (odnośnik otworzy się w nowym oknie)Dissemination and Communication plan. M18 - [ERTICO]. A living document, which describes the overall dissemination and communication strategy. All dissemination and communications efforts will be reported in the periodic reports. This deliverable is an update od D7.1
Publikacje
Autorzy:
Esmaeil Abbasi, Ahmad; Mangini, Agostino Marcello; Fanti, Maria Pia
Opublikowane w:
Electronics, 2024, ISSN 2079-9292
Wydawca:
MDPI
DOI:
10.3390/ELECTRONICS13183661
Autorzy:
Javad, Sadeghi; Cristiana, Botta; Brunella, Caroleo; Maurizio, Arnone
Opublikowane w:
Urban Science, 2025, ISSN 2413-8851
Wydawca:
MDPI
DOI:
10.3390/URBANSCI9100409
Autorzy:
Ruotian Liu, Agostino Marcello Mangini, Maria Pia Fanti
Opublikowane w:
IEEE/CAA Journal of Automatica Sinica, Numer 12, 2025, ISSN 2329-9266
Wydawca:
Institute of Electrical and Electronics Engineers (IEEE)
DOI:
10.1109/JAS.2025.125156
Autorzy:
Wasim A. Ali, Michele Roccotelli, Gennaro Boggia, Maria Pia Fanti
Opublikowane w:
Information Security Journal: A Global Perspective, Numer 33, 2024, ISSN 1939-3555
Wydawca:
Informa UK Limited
DOI:
10.1080/19393555.2024.2307638
Autorzy:
Maria del Cacho Estil-les, Maria Pia Fanti, Walter Ukovich
Opublikowane w:
International Journal of Business Management and Finance Research, Numer 8, 2025, ISSN 2641-5313
Wydawca:
Academia Publishing Group
DOI:
10.53935/26415313.V8I2.358
Autorzy:
Regis Decorme; Sébastien Faye; Monique Calisti; Simon Pryor; Indrakshi Dey; Maria Pia Fanti; Francesco Malandrino; Chiara Lombardo
Opublikowane w:
Open Research Europe, 2024, ISSN 2732-5121
Wydawca:
European Commission
DOI:
10.12688/OPENRESEUROPE.18767.1
Autorzy:
Volpe, Gaetano; Mangini, Agostino Marcello; Fanti, Maria Pia
Opublikowane w:
2023 IEEE 19th International Conference on Automation Science and Engineering (CASE), 2023, ISSN 2161-8089
Wydawca:
IEEE
DOI:
10.1109/CASE56687.2023.10260615
Autorzy:
Maria Asuncion del Cacho Estil-Les, Agostino Marcello Mangini, Michele Roccotelli, Maria Pia Fanti
Opublikowane w:
IEEE Transactions on Intelligent Transportation Systems, Numer 26, 2025, ISSN 1524-9050
Wydawca:
Institute of Electrical and Electronics Engineers (IEEE)
DOI:
10.1109/TITS.2025.3529181
Autorzy:
Wei Duan, Ruotian Liu, Maria Pia Fanti, Christoforos N. Hadjicostis, Zhiwu Li
Opublikowane w:
IEEE Control Systems Letters, Numer 7, 2023, ISSN 2475-1456
Wydawca:
Institute of Electrical and Electronics Engineers (IEEE)
DOI:
10.1109/LCSYS.2023.3284340
Autorzy:
Selim Dündar, Sina Alp, İrem Merve Ulu, Onur Dursun
Opublikowane w:
Sustainability, Numer 17, 2025, ISSN 2071-1050
Wydawca:
MDPI AG
DOI:
10.3390/SU17198948
Autorzy:
Sina Alp, Selim Dündar
Opublikowane w:
2024 Innovations in Intelligent Systems and Applications Conference (ASYU), 2025
Wydawca:
IEEE
DOI:
10.1109/ASYU62119.2024.10757118
Autorzy:
A. Krendeleva, G. Rotunno, W. Ukovich, M. P. Fanti
Opublikowane w:
2023, ISSN 2305-2023
Wydawca:
EMSS 2023
DOI:
10.46354/I3M.2023.EMSS.025
Autorzy:
Michele Roccotelli, Gaetano Volpe, Maria Pia Fanti, Agostino Marcello Mangini
Opublikowane w:
2024 IEEE 20th International Conference on Automation Science and Engineering (CASE), 2024
Wydawca:
IEEE
DOI:
10.1109/CASE59546.2024.10711495
Autorzy:
Juan C. Estrada-Jiménez, Valdemar R. Farré-Guijarro, Diana C. Alvarez-Paredes, Marie-Laure Watrinet
Opublikowane w:
2024 IEEE 35th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC), 2025
Wydawca:
IEEE
DOI:
10.1109/PIMRC59610.2024.10817462
Autorzy:
Maria A. del Cacho Estil-les, Wasim A. Ali, Maria Pia Fanti, Mario Binetti, Agostino M. Mangini
Opublikowane w:
2024 IEEE 20th International Conference on Automation Science and Engineering (CASE), 2024
Wydawca:
IEEE
DOI:
10.1109/CASE59546.2024.10711407
Autorzy:
Francesco Paparella, Giuseppe Olivieri, Gaetano Volpe, Agostino Marcello Mangini, Maria Pia Fanti
Opublikowane w:
2024 IEEE International Conference on Systems, Man, and Cybernetics (SMC), 2025
Wydawca:
IEEE
DOI:
10.1109/SMC54092.2024.10831232
Autorzy:
Oussema Gharsallaoui, Damien Nicolas, Marie-Laure Watrinet, Ion Turcanu
Opublikowane w:
2024 6th Conference on Blockchain Research & Applications for Innovative Networks and Services (BRAINS), 2024
Wydawca:
IEEE
DOI:
10.1109/BRAINS63024.2024.10732466
Autorzy:
Antonio Salcuni, Gaetano Volpe, Agostino Marcello Mangini, Maria Pia Fanti
Opublikowane w:
2025 IEEE 21st International Conference on Automation Science and Engineering (CASE), 2025
Wydawca:
IEEE
DOI:
10.1109/CASE58245.2025.11164075
Opublikowane w:
Proceedings of the 35th European Modeling & Simulation Symposium, EMSS, 2023
DOI:
10.46354/I3M.2023.EMSS.025
Autorzy:
F. Paparella, G. Volpe, A. M. Mangini and M. P. Fanti
Opublikowane w:
2023, ISBN 979-8-3503-3702-0
Wydawca:
IEEE
DOI:
10.5281/zenodo.12623416
Autorzy:
Paparella F.; Volpe G.; Mangini A. M.; Fanti M. P.
Opublikowane w:
2023 IEEE International Conference on Systems, Man, and Cybernetics (SMC), 2023
DOI:
10.1109/SMC53992.2023.10394341
Autorzy:
Giuseppe Olivieri, Gaetano Volpe, Agostino Marcello Mangini, Maria Pia Fanti
Opublikowane w:
2024 10th International Conference on Control, Decision and Information Technologies (CoDIT), 2024
Wydawca:
IEEE
DOI:
10.1109/CODIT62066.2024.10708500
Autorzy:
Silvestri, Bartolomeo; Ranieri, Luigi; Fanti, Maria Pia; Mangini, Agostino Marcello; Krendeleva, Angelina
Opublikowane w:
2025
Wydawca:
AIDI
Autorzy:
Tarkiainen, Mikko; Kauvo, Kimmo; Aittoniemi, Elina
Opublikowane w:
IEEE 20th International Conference on Automation Science and Engineering, Bari, Italy., 2024
Wydawca:
IEEE RAS
Opublikowane w:
Proceedings of the 35th European Modeling & Simulation Symposium, EMSS, 2023
Wydawca:
CAL-TEK srl
DOI:
10.46354/I3M.2023.EMSS.021
Autorzy:
G. Volpe, A. M. Mangini and M. P. Fanti
Opublikowane w:
2023, ISBN 979-8-3503-2069-5
Wydawca:
IEEE CASE
DOI:
10.5281/zenodo.12544068
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników