CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.
I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .
Risultati finali
Quality management plan M03 LIST This deliverable will present the project quality control strategy and a peer review system that will be followed towards all project deliverables and procedures
Existing mobility needs, road infrastructure and governance models (si apre in una nuova finestra)Existing mobility needs road infrastructure and governance models M06 ICCS It is the output of T21 T22 and T23 review the existing literature and projects about mobility needs concerns and expectations of European citizens and vulnerable user groups reviews the needs and requirements of relevant and important stakeholders eg policy makers authorities fleet and traffic operators etc towards the integration of CCAM solutions analyses the road infrastructure traffic rules and governance models for traffic management in relation with CCAM technologies and services
Study questions and KPIs of CCAM ecosystem (si apre in una nuova finestra)Study questions impact areas and KPIs of CCAM ecosystem M8 ICCS It is the output of T24 and will present the study questions and the KPIs to be used in the analyses of WP5
CCAM advanced simulation models and digital twin designs (si apre in una nuova finestra)CCAM advanced simulation models and digital twin designs. M21 [OKAN] – The document will provide advanced simulation models and digital twins for each related LL (output of T3.5).
Mobility network load balancing solutions (si apre in una nuova finestra)Mobility network load balancing solutions. M21 [GLS] – The document defines the architecture, algorithms, methods, APIs necessary for the integration of mobility network load balancing systems with traffic management solutions for each LL (output of T3.3).
Impact assessment methodology (si apre in una nuova finestra)Impact assessment methodology. M21 [OKAN] This deliverable is the output of T5.1 and will report the methodology and framework to evaluate the impact of the CCAM solutions all the LLs.
Use cases definition (si apre in una nuova finestra)Use cases definition M08 GLS It is the output of T25 and will present the use cases to be deployed in the LLs The defined use cases will be compared between LLs in order to find overlaps and propose an interoperability framework based on open standards best suited for the use cases and features defined in WP2
Project management plan - First update (si apre in una nuova finestra)Project management plan M06 POLIBA This deliverable will include a first schedule per task responsible partner related subtasks related deliverables and dependencies on other tasks a Gantt chart and a Work Breakdown Structure
Exploitation plans - First update (si apre in una nuova finestra)Exploitation plans. M18 - [TTS]. The document will include the project exploitation strategy and provide concrete Exploitation Plans. It will include, for each result with the highest market potential: stakeholders involved, resources needed, potential risks and barriers and actions required to exploit them beyond the project lifetime.
Liaison plan (si apre in una nuova finestra)Liaison plan M8 ERTICO Gathers a list of organisations initiatives and projects concluded and ongoing which would represent a benefit in the project successful implementation Specific methodologies and timing on how and when they will be involved will be included in a timeline The timeline will be based on the milestones and progresses of the project It is an output of T71
Data Management Plan - Second update (si apre in una nuova finestra)Data Management Plan – M18 [UBI] This deliverable will present the updated procedures and strategy to be followed in IN2CCAM for data handing and to ensure that its research data is findable, accessible, interoperable and reusable. It will include the principles for data processing, the security measures to be implemented and the informed consent procedures in regards to data processing, especially as regards tracking. This deliverable is an update of D1.4.
IN2CCAM public engagement strategy (si apre in una nuova finestra)IN2CCAM public engagement strategy M08 TTS It will provide the Public Engagement Strategy of IN2CCAM including objectives key target groups existing concerns knowledge and awareness level of CCAM messages that will be communicated channels and tools for engagement timeline and roles of partners
Project management plan - Second update (si apre in una nuova finestra)Project management plan – M18 [POLIBA] This deliverable will include a second schedule per task, responsible partner related subtasks, related deliverables, and dependencies on other tasks, a Gantt chart and a Work Breakdown Structure. This deliverable is an update of D1.1.
CCAM services architecture description (si apre in una nuova finestra)CCAM services architecture description. M21 [AKKA] - The document defines the elements of the CCAM services architecture, providing the basis for the technical innovations and developments of WP3 and the reference for the integrations of the LLs (output of T3.1).
Optimization of multimodal mobility services and goods management and delivery systems (si apre in una nuova finestra)Optimization of multimodal mobility services and goods management and delivery systems. M21 [VTT] – The document will provide descriptions of the individual and integrated mobility service offering and means and results of the service optimization at LLs (output of T3.2 and T3.4).
Data Management Plan - First update (si apre in una nuova finestra)Data Management Plan M06 UBI This deliverable will present the procedures and strategy to be followed in IN2CCAM for data handing and to ensure that its research data is findable accessible interoperable and reusable It will include the principles for data processing the security measures to be implemented and the informed consent procedures in regards to data processing especially as regards tracking
Innovation management plan (si apre in una nuova finestra)Innovation management plan M06 POLIBA It will present the IN2CCAM innovation results and will detail the innovations technical coherence and implementation opportunities with respect to the planned progress It will include an assessment of possible technical risks and means of preventing them It will describe the exploitation activities needed to exploit the project results
Dissemination and Communication plan - First update (si apre in una nuova finestra)Dissemination and Communication plan M4 ERTICO A living document which describes the overall dissemination and communication strategy All dissemination and communications efforts will be reported in the periodic reports
Dissemination and Communication plan - Second update (si apre in una nuova finestra)Dissemination and Communication plan. M18 - [ERTICO]. A living document, which describes the overall dissemination and communication strategy. All dissemination and communications efforts will be reported in the periodic reports. This deliverable is an update od D7.1
Pubblicazioni
Autori:
Esmaeil Abbasi, Ahmad; Mangini, Agostino Marcello; Fanti, Maria Pia
Pubblicato in:
Electronics, 2024, ISSN 2079-9292
Editore:
MDPI
DOI:
10.3390/ELECTRONICS13183661
Autori:
Javad, Sadeghi; Cristiana, Botta; Brunella, Caroleo; Maurizio, Arnone
Pubblicato in:
Urban Science, 2025, ISSN 2413-8851
Editore:
MDPI
DOI:
10.3390/URBANSCI9100409
Autori:
Ruotian Liu, Agostino Marcello Mangini, Maria Pia Fanti
Pubblicato in:
IEEE/CAA Journal of Automatica Sinica, Numero 12, 2025, ISSN 2329-9266
Editore:
Institute of Electrical and Electronics Engineers (IEEE)
DOI:
10.1109/JAS.2025.125156
Autori:
Wasim A. Ali, Michele Roccotelli, Gennaro Boggia, Maria Pia Fanti
Pubblicato in:
Information Security Journal: A Global Perspective, Numero 33, 2024, ISSN 1939-3555
Editore:
Informa UK Limited
DOI:
10.1080/19393555.2024.2307638
Autori:
Maria del Cacho Estil-les, Maria Pia Fanti, Walter Ukovich
Pubblicato in:
International Journal of Business Management and Finance Research, Numero 8, 2025, ISSN 2641-5313
Editore:
Academia Publishing Group
DOI:
10.53935/26415313.V8I2.358
Autori:
Regis Decorme; Sébastien Faye; Monique Calisti; Simon Pryor; Indrakshi Dey; Maria Pia Fanti; Francesco Malandrino; Chiara Lombardo
Pubblicato in:
Open Research Europe, 2024, ISSN 2732-5121
Editore:
European Commission
DOI:
10.12688/OPENRESEUROPE.18767.1
Autori:
Volpe, Gaetano; Mangini, Agostino Marcello; Fanti, Maria Pia
Pubblicato in:
2023 IEEE 19th International Conference on Automation Science and Engineering (CASE), 2023, ISSN 2161-8089
Editore:
IEEE
DOI:
10.1109/CASE56687.2023.10260615
Autori:
Maria Asuncion del Cacho Estil-Les, Agostino Marcello Mangini, Michele Roccotelli, Maria Pia Fanti
Pubblicato in:
IEEE Transactions on Intelligent Transportation Systems, Numero 26, 2025, ISSN 1524-9050
Editore:
Institute of Electrical and Electronics Engineers (IEEE)
DOI:
10.1109/TITS.2025.3529181
Autori:
Wei Duan, Ruotian Liu, Maria Pia Fanti, Christoforos N. Hadjicostis, Zhiwu Li
Pubblicato in:
IEEE Control Systems Letters, Numero 7, 2023, ISSN 2475-1456
Editore:
Institute of Electrical and Electronics Engineers (IEEE)
DOI:
10.1109/LCSYS.2023.3284340
Autori:
Selim Dündar, Sina Alp, İrem Merve Ulu, Onur Dursun
Pubblicato in:
Sustainability, Numero 17, 2025, ISSN 2071-1050
Editore:
MDPI AG
DOI:
10.3390/SU17198948
Autori:
Sina Alp, Selim Dündar
Pubblicato in:
2024 Innovations in Intelligent Systems and Applications Conference (ASYU), 2025
Editore:
IEEE
DOI:
10.1109/ASYU62119.2024.10757118
Autori:
A. Krendeleva, G. Rotunno, W. Ukovich, M. P. Fanti
Pubblicato in:
2023, ISSN 2305-2023
Editore:
EMSS 2023
DOI:
10.46354/I3M.2023.EMSS.025
Autori:
Michele Roccotelli, Gaetano Volpe, Maria Pia Fanti, Agostino Marcello Mangini
Pubblicato in:
2024 IEEE 20th International Conference on Automation Science and Engineering (CASE), 2024
Editore:
IEEE
DOI:
10.1109/CASE59546.2024.10711495
Autori:
Juan C. Estrada-Jiménez, Valdemar R. Farré-Guijarro, Diana C. Alvarez-Paredes, Marie-Laure Watrinet
Pubblicato in:
2024 IEEE 35th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC), 2025
Editore:
IEEE
DOI:
10.1109/PIMRC59610.2024.10817462
Autori:
Maria A. del Cacho Estil-les, Wasim A. Ali, Maria Pia Fanti, Mario Binetti, Agostino M. Mangini
Pubblicato in:
2024 IEEE 20th International Conference on Automation Science and Engineering (CASE), 2024
Editore:
IEEE
DOI:
10.1109/CASE59546.2024.10711407
Autori:
Francesco Paparella, Giuseppe Olivieri, Gaetano Volpe, Agostino Marcello Mangini, Maria Pia Fanti
Pubblicato in:
2024 IEEE International Conference on Systems, Man, and Cybernetics (SMC), 2025
Editore:
IEEE
DOI:
10.1109/SMC54092.2024.10831232
Autori:
Oussema Gharsallaoui, Damien Nicolas, Marie-Laure Watrinet, Ion Turcanu
Pubblicato in:
2024 6th Conference on Blockchain Research & Applications for Innovative Networks and Services (BRAINS), 2024
Editore:
IEEE
DOI:
10.1109/BRAINS63024.2024.10732466
Autori:
Antonio Salcuni, Gaetano Volpe, Agostino Marcello Mangini, Maria Pia Fanti
Pubblicato in:
2025 IEEE 21st International Conference on Automation Science and Engineering (CASE), 2025
Editore:
IEEE
DOI:
10.1109/CASE58245.2025.11164075
Pubblicato in:
Proceedings of the 35th European Modeling & Simulation Symposium, EMSS, 2023
DOI:
10.46354/I3M.2023.EMSS.025
Autori:
F. Paparella, G. Volpe, A. M. Mangini and M. P. Fanti
Pubblicato in:
2023, ISBN 979-8-3503-3702-0
Editore:
IEEE
DOI:
10.5281/zenodo.12623416
Autori:
Paparella F.; Volpe G.; Mangini A. M.; Fanti M. P.
Pubblicato in:
2023 IEEE International Conference on Systems, Man, and Cybernetics (SMC), 2023
DOI:
10.1109/SMC53992.2023.10394341
Autori:
Giuseppe Olivieri, Gaetano Volpe, Agostino Marcello Mangini, Maria Pia Fanti
Pubblicato in:
2024 10th International Conference on Control, Decision and Information Technologies (CoDIT), 2024
Editore:
IEEE
DOI:
10.1109/CODIT62066.2024.10708500
Autori:
Silvestri, Bartolomeo; Ranieri, Luigi; Fanti, Maria Pia; Mangini, Agostino Marcello; Krendeleva, Angelina
Pubblicato in:
2025
Editore:
AIDI
Autori:
Tarkiainen, Mikko; Kauvo, Kimmo; Aittoniemi, Elina
Pubblicato in:
IEEE 20th International Conference on Automation Science and Engineering, Bari, Italy., 2024
Editore:
IEEE RAS
Pubblicato in:
Proceedings of the 35th European Modeling & Simulation Symposium, EMSS, 2023
Editore:
CAL-TEK srl
DOI:
10.46354/I3M.2023.EMSS.021
Autori:
G. Volpe, A. M. Mangini and M. P. Fanti
Pubblicato in:
2023, ISBN 979-8-3503-2069-5
Editore:
IEEE CASE
DOI:
10.5281/zenodo.12544068
È in corso la ricerca di dati su OpenAIRE...
Si è verificato un errore durante la ricerca dei dati su OpenAIRE
Nessun risultato disponibile