Exploring Plausible Circular futures

Información del proyecto

ExPliCit

Identificador del acuerdo de subvención: 101086465

DOI

10.3030/101086465

Proyecto cerrado

Fecha de la firma de la CE 27 Octubre 2022

Fecha de inicio 1 Enero 2023

Fecha de finalización 31 Diciembre 2025

Financiado con arreglo a

• Marie Skłodowska-Curie Actions (MSCA)

Coste total

Sin datos

Aportación de la UE

€ 349 600,00

Coordinado por

UNIVERSITA DEGLI STUDI DI NAPOLI PARTHENOPE
Italy

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (11)

Modelling assumptions

A detailed modelling framework aimed at mapping and representing circular supply chains in the identified future scenarios will be devised.

Horizon scanning and foresight techniques review

A review of horizon scanning and foresight methods and techniques will be performed in order to inform methodological choices for WP1

Performance evaluation framework

A framework of indicators aimed at measuring the performance of supply chains in the transition towards a Circular Economy will be developed.

Supply chain taxonomy

In this deliverable, a taxonomy of supply chain configurations aimed at supporting the transition towards a Circular Economy will be developed. Also, the suitability of each supply chain configuration with respect to the identified alternative Circular Futures will be evaluated.

Dissemination plan

A plan detailing the full set of dissemination activities throughout the lifetime of the project will be put together

Scenario Exploration System adaptation

Based on the project needs the Scenario Exploration System will be developed and tailored to deal with Circular Economy futures foresight

Policy briefs

Academic papers and main results from the project will be translated into short policy briefs.

Selected case studies

Methods developed in WP3 will be tested on a set of case studies linked to typified supply chains identified in WP2.

Futuring techniques for Circular Economy foresight

Based on the review performed in D11 selected techniques will be adapted to the specific needs of the project

Stakeholder engagement workshops reports

A report of the findings emerging from the stakeholders' engagement activities regarding the validation of plausible circular futures will be produced.

Stakeholders' collaboration patterns

An investigation on stakeholders’ collaboration patterns in alternative supply chain configurations will be developed. Results will be condensed in a research report.

Data Management Plan (1)

Data Management Plan

A plan detailing all the issues related to data collection handling and storage will be developed

Publicaciones

Peer reviewed articles (17)

On the bullwhip effect in circular supply chains combining by-products and end-of-life returns

Autores: Rebecca Fussone, Salvatore Cannella, Roberto Dominguez, Jose M. Framinan
Publicado en: Applied Mathematical Modelling, Edición 137, 2024, ISSN 0307-904X
Editor: Elsevier BV
DOI: 10.1016/j.apm.2024.115670

Perspectives on Energy, Environmental and Economic Benefits from Collaborative Interactions of Circular Start-Ups and Large Companies—A Case Study in the Textile District of Prato, Tuscany Region (Italy)

Autores: Patrizia Ghisellini, Ivana Quinto, Renato Passaro, Sergio Ulgiati
Publicado en: Energies, Edición 19, 2025, ISSN 1996-1073
Editor: MDPI AG
DOI: 10.3390/EN19010184

Understanding the relationship between institutional pressures, supply chain integration and the adoption of circular economy practices

Autores: Tommaso Calzolari, Meletios Bimpizas-Pinis, Andrea Genovese, Andrew Brint
Publicado en: Journal of Cleaner Production, Edición 432, 2023, ISSN 1879-1786
Editor: Elsevier
DOI: 10.1016/j.jclepro.2023.139686

Unlocking circularity: the interplay between institutional pressures and supply chain integration

Autores: Tommaso Calzolari, Andrea Genovese, Andrew Brint, Stefan Seuring
Publicado en: International Journal of Operations & Production Management, Edición 45, 2025, ISSN 0144-3577
Editor: Emerald
DOI: 10.1108/IJOPM-10-2023-0860

Digital twin model with machine learning and optimization for resilient production–distribution systems under disruptions

Autores: Roberto Rosario Corsini, Antonio Costa, Sergio Fichera, Jose M. Framinan
Publicado en: Computers & Industrial Engineering, Edición 191, 2024, ISSN 0360-8352
Editor: Elsevier BV
DOI: 10.1016/J.CIE.2024.110145

Resilience analysis of Circular Supply Chains under demand spike

Autores: Rachele Fussone, Rebecca Fussone, Salvatore Cannella, Giovanni Giuffrida, Jose M Framinan
Publicado en: IFAC-PapersOnLine, Edición 59, 2025, ISSN 2405-8963
Editor: Elsevier BV
DOI: 10.1016/J.IFACOL.2025.09.327

The Social Importance of Researching Action-Oriented Circular Futures

Autores: Brais Suárez-Eiroa
Publicado en: Journal of Circular Economy, Edición 3, 2025, ISSN 2752-163X
Editor: DSRPT GbR
DOI: 10.55845/OYKZ1486

Planning for a future free from rebound effects

Autores: Andrea Genovese, Benjamin H. Lowe, Meletios Bimpizas-Pinis, V.G. Ram
Publicado en: Futures, Edición 164, 2024, ISSN 0016-3287
Editor: Elsevier BV
DOI: 10.1016/j.futures.2024.103479

Towards radical circular economy futures: Addressing social relations of production

Autores: Leandro J. Llorente-González, Josep Pinyol Alberich, Andrea Genovese, Benjamin H. Lowe
Publicado en: Technological Forecasting and Social Change, Edición 213, 2025, ISSN 0040-1625
Editor: Elsevier BV
DOI: 10.1016/J.TECHFORE.2025.123972

Enhancing circular economy through industrial symbiosis: An agent-based simulation analysis of supply chain dynamics

Autores: Rebecca Fussone, Caterina Sammatrice, Salvatore Cannella, Roberto Dominguez
Publicado en: Sustainable Operations and Computers, Edición 6, 2025, ISSN 2666-4127
Editor: Elsevier BV
DOI: 10.1016/J.SUSOC.2025.03.002

Hacia una circularidad justa y sostenible: Una aproximación a la economía circular desde la economía ecológica y la ecología política

Autores: Brais Suárez Eiroa
Publicado en: TERRA: Revista de Desarrollo Local, 2024, ISSN 2386-9968
Editor: Universitat de Valencia
DOI: 10.7203/TERRA.12.26277

Exploring symbiotic supply chains dynamics

Autores: Fussone, R., Cannella, S., Dominguez, R., Framinan, J. M.
Publicado en: Computers & Industrial Engineering, Edición 109833, 2023, ISSN 1879-0550
Editor: Elsevier
DOI: 10.1016/j.cie.2023.109833

Push vs Pull replenishment policies in Symbiotic Supply Chains

Autores: Rebecca Fussone, Rachele Fussone, Salvatore Cannella, Jose M Framinan
Publicado en: IFAC-PapersOnLine, Edición 59, 2025, ISSN 2405-8963
Editor: Elsevier BV
DOI: 10.1016/J.IFACOL.2025.09.040

Closed-loop supply chains: How do production capacity and production control policies impact the performance?

Autores: Roberto Rosario Corsini, Salvatore Cannella, Roberto Dominguez, Antonio Costa
Publicado en: Computers & Industrial Engineering, Edición 189, 2025, ISSN 0360-8352
Editor: Elsevier BV
DOI: 10.1016/J.CIE.2024.109939

Closed-loop supply chains: How do production capacity and production control policies impact the performance?

Autores: Roberto Rosario Corsini, Salvatore Cannella, Roberto Dominguez, Antonio Costa
Publicado en: Computers & Industrial Engineering, Edición 189, 2024, ISSN 0360-8352
Editor: Elsevier BV
DOI: 10.1016/j.cie.2024.109939

Emergy-based environmental decision making: H.T. Odum´s heritage for appropriate use of resources and environmental services

Autores: Sergio Ulgiati, Patrizia Ghisellini, Yanxin Liu, Renato Passaro
Publicado en: Ecological Modelling, Edición 513, 2026, ISSN 0304-3800
Editor: Elsevier BV
DOI: 10.1016/J.ECOLMODEL.2025.111435

Bullwhip effect in closed-loop supply chains with multiple reverse flows: a simulation study

Autores: Rebecca Fussone, Roberto Dominguez, Salvatore Cannella, Jose M. Framinan
Publicado en: Flexible Services and Manufacturing Journal, Edición 36, 2024, ISSN 1936-6582
Editor: Springer Science and Business Media LLC
DOI: 10.1007/S10696-023-09486-X

Conference proceedings (15)

Modelling Assumptions For Supply Chains In Plausible Circular Futures.

Autores: Fussone R., Cannella S., Fussone Rh., Framinan J.M.
Publicado en: Book of abstracts III International Congress-CIEQV, 2025
Editor: N/A

On symbiotic supply chains dynamics: a modelling approach to quantify the bullwhip effect in a Circular Economy environment.

Autores: Fussone R., Cannella S., Framiñan J.M.
Publicado en: 30th European Operations Management Association Conference, 2023

On the dynamics of Circular Supply Chains: which factors influence their performance?

Autores: Fussone, R., Cannella, S., Fraccascia, L., Framinan, JM
Publicado en: 34th Annual Scientific Meeting of the Italian Association of Management Engineering, 2023
Editor: N/A

The impact of Information Transparency and Waste Treatment Lead Time in Symbiotic Supply Chains: a Simulation study

Publicado en: Proceedings of the 11th International Workshop on Simulation for Energy, Sustainable Development & Environment, SESDE, 2023
Editor: CAL-TEK srl
DOI: 10.46354/i3m.2023.sesde.013

Moving towards a Circular Economy upcycling waste in supply chains: an agent-based study of Industrial Symbiosis Networks

Autores: Fussone R., Sammatrice C., Cannella S., Dominguez R., Framinan J. M.
Publicado en: XXXIV RSA AiIG 2024, 2024
Editor: N/A

A Framework for Assessing the Sustainability of P2P Platforms

Autores: V.Fiengo, R.Passaro, I.Quinto
Publicado en: 2025
Editor: Proceedings of 20th IFKAD, 2025

Assessing the Sustainability of Peer-to-Peer Sharing Platforms: A Holistic Evaluation Framework

Autores: V.Fiengo, A.Genovese R.Passaro, I.Quinto
Publicado en: 025 R&D Management Conference “Innovation & Biodiversity, 2025
Editor: R&D Management

Assessing the Sustainability of Peer-to-Peer Sharing Platforms: A Holistic Evaluation Framework

Autores: V.Fiengo, A.Genovese R.Passaro, I.Quinto
Publicado en: 025 R&D Management Conference “Innovation & Biodiversity, 2025

On symbiotic supply chains dynamics: a modelling approach to quantify the bullwhip effect in a Circular Economy environment.

Autores: Fussone R., Cannella S., Framiñan J.M.
Publicado en: 30th European Operations Management Association Conference, 2023
Editor: N/A

A Simulation study of closed-loop supply chain for EVB remanufacturing: operational and environmental analysis,

Autores: Favazza E., Fussone, R., Cannella, S., & Framinan, J. M.
Publicado en: 2025
Editor: Proceedings of International Conference on Computers and Industrial Engineering, CIE52

Moving towards a Circular Economy upcycling waste in supply chains: an agent-based study of Industrial Symbiosis Networks

Autores: Fussone R., Sammatrice C., Cannella S., Dominguez R., Framinan J. M.
Publicado en: XXXIV RSA AiIG 2024, 2024

A Simulation study of closed-loop supply chain for EVB remanufacturing: operational and environmental analysis,

Autores: Favazza E., Fussone, R., Cannella, S., & Framinan, J. M.
Publicado en: Proceedings of International Conference on Computers and Industrial Engineering, CIE52, 2025
Editor: Proceedings of International Conference on Computers and Industrial Engineering, CIE52

A Framework for Assessing the Sustainability of P2P Platforms

Autores: V.Fiengo, R.Passaro, I.Quinto
Publicado en: Proceedings of 20th IFKAD, 2025, 2025, ISSN 2280-787X
Editor: IFKAD

Building resilient circular supply chains,

Autores: Fussone Rh., Fussone, R., Cannella, S., Giuffrida, G., & Framinan, J. M.
Publicado en: Conference on Computers and Industrial Engineering, CIE52., 2025
Editor: Conference on Computers and Industrial Engineering, CIE52.

On the dynamics of Circular Supply Chains: which factors influence their performance?

Autores: Fussone, R., Cannella, S., Fraccascia, L., Framinan, JM
Publicado en: 34th Annual Scientific Meeting of the Italian Association of Management Engineering, 2023

Book chapters (2)

Assessing the Impact of Remanufacturing Through Industrial Symbiosis on Supply Chain Performance

Autores: Rebecca Fussone, Salvatore Cannella, Roberto Corsini, Jose M. Framiñan
Publicado en: Lecture Notes in Mechanical Engineering, Advances in Remanufacturing, 2024
Editor: Springer Nature Switzerland
DOI: 10.1007/978-3-031-52649-7_26

The dynamics of closed-loop supply chains: Definitions, trends, and challenges

Autores: Borja Ponte, María de Arquer, Salvatore Cannella, Roberto Dominguez
Publicado en: Reference Module in Social Sciences, 2025
Editor: Elsevier
DOI: 10.1016/B978-0-443-28993-4.00197-9