Exploring Plausible Circular futures

Projektinformationen

ExPliCit

ID Finanzhilfevereinbarung: 101086465

DOI

10.3030/101086465

Projekt abgeschlossen

EK-Unterschriftsdatum 27 Oktober 2022

Startdatum 1 Januar 2023

Enddatum 31 Dezember 2025

Finanziert unter

• Marie Skłodowska-Curie Actions (MSCA)

Gesamtkosten

Keine Daten

EU-Beitrag

€ 349 600,00

Koordiniert durch

UNIVERSITA DEGLI STUDI DI NAPOLI PARTHENOPE
Italy

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Documents, reports (11)

Modelling assumptions

A detailed modelling framework aimed at mapping and representing circular supply chains in the identified future scenarios will be devised.

Horizon scanning and foresight techniques review

A review of horizon scanning and foresight methods and techniques will be performed in order to inform methodological choices for WP1

Performance evaluation framework

A framework of indicators aimed at measuring the performance of supply chains in the transition towards a Circular Economy will be developed.

Supply chain taxonomy

In this deliverable, a taxonomy of supply chain configurations aimed at supporting the transition towards a Circular Economy will be developed. Also, the suitability of each supply chain configuration with respect to the identified alternative Circular Futures will be evaluated.

Dissemination plan

A plan detailing the full set of dissemination activities throughout the lifetime of the project will be put together

Scenario Exploration System adaptation

Based on the project needs the Scenario Exploration System will be developed and tailored to deal with Circular Economy futures foresight

Policy briefs

Academic papers and main results from the project will be translated into short policy briefs.

Selected case studies

Methods developed in WP3 will be tested on a set of case studies linked to typified supply chains identified in WP2.

Futuring techniques for Circular Economy foresight

Based on the review performed in D11 selected techniques will be adapted to the specific needs of the project

Stakeholder engagement workshops reports

A report of the findings emerging from the stakeholders' engagement activities regarding the validation of plausible circular futures will be produced.

Stakeholders' collaboration patterns

An investigation on stakeholders’ collaboration patterns in alternative supply chain configurations will be developed. Results will be condensed in a research report.

Data Management Plan (1)

Data Management Plan

A plan detailing all the issues related to data collection handling and storage will be developed

Veröffentlichungen

Peer reviewed articles (17)

On the bullwhip effect in circular supply chains combining by-products and end-of-life returns

Autoren: Rebecca Fussone, Salvatore Cannella, Roberto Dominguez, Jose M. Framinan
Veröffentlicht in: Applied Mathematical Modelling, Ausgabe 137, 2024, ISSN 0307-904X
Herausgeber: Elsevier BV
DOI: 10.1016/j.apm.2024.115670

Perspectives on Energy, Environmental and Economic Benefits from Collaborative Interactions of Circular Start-Ups and Large Companies—A Case Study in the Textile District of Prato, Tuscany Region (Italy)

Autoren: Patrizia Ghisellini, Ivana Quinto, Renato Passaro, Sergio Ulgiati
Veröffentlicht in: Energies, Ausgabe 19, 2025, ISSN 1996-1073
Herausgeber: MDPI AG
DOI: 10.3390/EN19010184

Understanding the relationship between institutional pressures, supply chain integration and the adoption of circular economy practices

Autoren: Tommaso Calzolari, Meletios Bimpizas-Pinis, Andrea Genovese, Andrew Brint
Veröffentlicht in: Journal of Cleaner Production, Ausgabe 432, 2023, ISSN 1879-1786
Herausgeber: Elsevier
DOI: 10.1016/j.jclepro.2023.139686

Unlocking circularity: the interplay between institutional pressures and supply chain integration

Autoren: Tommaso Calzolari, Andrea Genovese, Andrew Brint, Stefan Seuring
Veröffentlicht in: International Journal of Operations & Production Management, Ausgabe 45, 2025, ISSN 0144-3577
Herausgeber: Emerald
DOI: 10.1108/IJOPM-10-2023-0860

Digital twin model with machine learning and optimization for resilient production–distribution systems under disruptions

Autoren: Roberto Rosario Corsini, Antonio Costa, Sergio Fichera, Jose M. Framinan
Veröffentlicht in: Computers & Industrial Engineering, Ausgabe 191, 2024, ISSN 0360-8352
Herausgeber: Elsevier BV
DOI: 10.1016/J.CIE.2024.110145

Resilience analysis of Circular Supply Chains under demand spike

Autoren: Rachele Fussone, Rebecca Fussone, Salvatore Cannella, Giovanni Giuffrida, Jose M Framinan
Veröffentlicht in: IFAC-PapersOnLine, Ausgabe 59, 2025, ISSN 2405-8963
Herausgeber: Elsevier BV
DOI: 10.1016/J.IFACOL.2025.09.327

The Social Importance of Researching Action-Oriented Circular Futures

Autoren: Brais Suárez-Eiroa
Veröffentlicht in: Journal of Circular Economy, Ausgabe 3, 2025, ISSN 2752-163X
Herausgeber: DSRPT GbR
DOI: 10.55845/OYKZ1486

Planning for a future free from rebound effects

Autoren: Andrea Genovese, Benjamin H. Lowe, Meletios Bimpizas-Pinis, V.G. Ram
Veröffentlicht in: Futures, Ausgabe 164, 2024, ISSN 0016-3287
Herausgeber: Elsevier BV
DOI: 10.1016/j.futures.2024.103479

Towards radical circular economy futures: Addressing social relations of production

Autoren: Leandro J. Llorente-González, Josep Pinyol Alberich, Andrea Genovese, Benjamin H. Lowe
Veröffentlicht in: Technological Forecasting and Social Change, Ausgabe 213, 2025, ISSN 0040-1625
Herausgeber: Elsevier BV
DOI: 10.1016/J.TECHFORE.2025.123972

Enhancing circular economy through industrial symbiosis: An agent-based simulation analysis of supply chain dynamics

Autoren: Rebecca Fussone, Caterina Sammatrice, Salvatore Cannella, Roberto Dominguez
Veröffentlicht in: Sustainable Operations and Computers, Ausgabe 6, 2025, ISSN 2666-4127
Herausgeber: Elsevier BV
DOI: 10.1016/J.SUSOC.2025.03.002

Hacia una circularidad justa y sostenible: Una aproximación a la economía circular desde la economía ecológica y la ecología política

Autoren: Brais Suárez Eiroa
Veröffentlicht in: TERRA: Revista de Desarrollo Local, 2024, ISSN 2386-9968
Herausgeber: Universitat de Valencia
DOI: 10.7203/TERRA.12.26277

Exploring symbiotic supply chains dynamics

Autoren: Fussone, R., Cannella, S., Dominguez, R., Framinan, J. M.
Veröffentlicht in: Computers & Industrial Engineering, Ausgabe 109833, 2023, ISSN 1879-0550
Herausgeber: Elsevier
DOI: 10.1016/j.cie.2023.109833

Push vs Pull replenishment policies in Symbiotic Supply Chains

Autoren: Rebecca Fussone, Rachele Fussone, Salvatore Cannella, Jose M Framinan
Veröffentlicht in: IFAC-PapersOnLine, Ausgabe 59, 2025, ISSN 2405-8963
Herausgeber: Elsevier BV
DOI: 10.1016/J.IFACOL.2025.09.040

Closed-loop supply chains: How do production capacity and production control policies impact the performance?

Autoren: Roberto Rosario Corsini, Salvatore Cannella, Roberto Dominguez, Antonio Costa
Veröffentlicht in: Computers & Industrial Engineering, Ausgabe 189, 2025, ISSN 0360-8352
Herausgeber: Elsevier BV
DOI: 10.1016/J.CIE.2024.109939

Closed-loop supply chains: How do production capacity and production control policies impact the performance?

Autoren: Roberto Rosario Corsini, Salvatore Cannella, Roberto Dominguez, Antonio Costa
Veröffentlicht in: Computers & Industrial Engineering, Ausgabe 189, 2024, ISSN 0360-8352
Herausgeber: Elsevier BV
DOI: 10.1016/j.cie.2024.109939

Emergy-based environmental decision making: H.T. Odum´s heritage for appropriate use of resources and environmental services

Autoren: Sergio Ulgiati, Patrizia Ghisellini, Yanxin Liu, Renato Passaro
Veröffentlicht in: Ecological Modelling, Ausgabe 513, 2026, ISSN 0304-3800
Herausgeber: Elsevier BV
DOI: 10.1016/J.ECOLMODEL.2025.111435

Bullwhip effect in closed-loop supply chains with multiple reverse flows: a simulation study

Autoren: Rebecca Fussone, Roberto Dominguez, Salvatore Cannella, Jose M. Framinan
Veröffentlicht in: Flexible Services and Manufacturing Journal, Ausgabe 36, 2024, ISSN 1936-6582
Herausgeber: Springer Science and Business Media LLC
DOI: 10.1007/S10696-023-09486-X

Conference proceedings (15)

Modelling Assumptions For Supply Chains In Plausible Circular Futures.

Autoren: Fussone R., Cannella S., Fussone Rh., Framinan J.M.
Veröffentlicht in: Book of abstracts III International Congress-CIEQV, 2025
Herausgeber: N/A

On symbiotic supply chains dynamics: a modelling approach to quantify the bullwhip effect in a Circular Economy environment.

Autoren: Fussone R., Cannella S., Framiñan J.M.
Veröffentlicht in: 30th European Operations Management Association Conference, 2023

On the dynamics of Circular Supply Chains: which factors influence their performance?

Autoren: Fussone, R., Cannella, S., Fraccascia, L., Framinan, JM
Veröffentlicht in: 34th Annual Scientific Meeting of the Italian Association of Management Engineering, 2023
Herausgeber: N/A

The impact of Information Transparency and Waste Treatment Lead Time in Symbiotic Supply Chains: a Simulation study

Veröffentlicht in: Proceedings of the 11th International Workshop on Simulation for Energy, Sustainable Development & Environment, SESDE, 2023
Herausgeber: CAL-TEK srl
DOI: 10.46354/i3m.2023.sesde.013

Moving towards a Circular Economy upcycling waste in supply chains: an agent-based study of Industrial Symbiosis Networks

Autoren: Fussone R., Sammatrice C., Cannella S., Dominguez R., Framinan J. M.
Veröffentlicht in: XXXIV RSA AiIG 2024, 2024
Herausgeber: N/A

A Framework for Assessing the Sustainability of P2P Platforms

Autoren: V.Fiengo, R.Passaro, I.Quinto
Veröffentlicht in: 2025
Herausgeber: Proceedings of 20th IFKAD, 2025

Assessing the Sustainability of Peer-to-Peer Sharing Platforms: A Holistic Evaluation Framework

Autoren: V.Fiengo, A.Genovese R.Passaro, I.Quinto
Veröffentlicht in: 025 R&D Management Conference “Innovation & Biodiversity, 2025
Herausgeber: R&D Management

Assessing the Sustainability of Peer-to-Peer Sharing Platforms: A Holistic Evaluation Framework

Autoren: V.Fiengo, A.Genovese R.Passaro, I.Quinto
Veröffentlicht in: 025 R&D Management Conference “Innovation & Biodiversity, 2025

On symbiotic supply chains dynamics: a modelling approach to quantify the bullwhip effect in a Circular Economy environment.

Autoren: Fussone R., Cannella S., Framiñan J.M.
Veröffentlicht in: 30th European Operations Management Association Conference, 2023
Herausgeber: N/A

A Simulation study of closed-loop supply chain for EVB remanufacturing: operational and environmental analysis,

Autoren: Favazza E., Fussone, R., Cannella, S., & Framinan, J. M.
Veröffentlicht in: 2025
Herausgeber: Proceedings of International Conference on Computers and Industrial Engineering, CIE52

Moving towards a Circular Economy upcycling waste in supply chains: an agent-based study of Industrial Symbiosis Networks

Autoren: Fussone R., Sammatrice C., Cannella S., Dominguez R., Framinan J. M.
Veröffentlicht in: XXXIV RSA AiIG 2024, 2024

A Simulation study of closed-loop supply chain for EVB remanufacturing: operational and environmental analysis,

Autoren: Favazza E., Fussone, R., Cannella, S., & Framinan, J. M.
Veröffentlicht in: Proceedings of International Conference on Computers and Industrial Engineering, CIE52, 2025
Herausgeber: Proceedings of International Conference on Computers and Industrial Engineering, CIE52

A Framework for Assessing the Sustainability of P2P Platforms

Autoren: V.Fiengo, R.Passaro, I.Quinto
Veröffentlicht in: Proceedings of 20th IFKAD, 2025, 2025, ISSN 2280-787X
Herausgeber: IFKAD

Building resilient circular supply chains,

Autoren: Fussone Rh., Fussone, R., Cannella, S., Giuffrida, G., & Framinan, J. M.
Veröffentlicht in: Conference on Computers and Industrial Engineering, CIE52., 2025
Herausgeber: Conference on Computers and Industrial Engineering, CIE52.

On the dynamics of Circular Supply Chains: which factors influence their performance?

Autoren: Fussone, R., Cannella, S., Fraccascia, L., Framinan, JM
Veröffentlicht in: 34th Annual Scientific Meeting of the Italian Association of Management Engineering, 2023

Book chapters (2)

Assessing the Impact of Remanufacturing Through Industrial Symbiosis on Supply Chain Performance

Autoren: Rebecca Fussone, Salvatore Cannella, Roberto Corsini, Jose M. Framiñan
Veröffentlicht in: Lecture Notes in Mechanical Engineering, Advances in Remanufacturing, 2024
Herausgeber: Springer Nature Switzerland
DOI: 10.1007/978-3-031-52649-7_26

The dynamics of closed-loop supply chains: Definitions, trends, and challenges

Autoren: Borja Ponte, María de Arquer, Salvatore Cannella, Roberto Dominguez
Veröffentlicht in: Reference Module in Social Sciences, 2025
Herausgeber: Elsevier
DOI: 10.1016/B978-0-443-28993-4.00197-9