CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
D1.1 Quality Assurance Plan and risk assessment [CTM, M1] - Internal procedures for communication, progress monitoring, quality assurance and risk management. (Linked to T1.1 & T1.2)
Life cycle assessment for 3 multi-material products produced by AM (se abrirá en una nueva ventana)Report comparing the LCA of new and traditional manufacturing methods.
First progress and financial reports (se abrirá en una nueva ventana)D1.2 Progress and financial reports [CTM, M12, M24, M36] – Reports on progress and financial management, as well as communication and dissemination activities and actions. (Linked to T1.2 & T1.3)
Final progress and financial reports (se abrirá en una nueva ventana)D1.2 Progress and financial reports [CTM, M12, M24, M36] – Reports on progress and financial management, as well as communication and dissemination activities and actions. (Linked to T1.2 & T1.3)
Report of Communication, Exploitation & Dissemination Plan (se abrirá en una nueva ventana)A report that describes the MULTHEM Communication, Exploitation & Dissemination Plan (M6).
Recommendations for disassembling and recycling of 3 multi-material products produced by AM (se abrirá en una nueva ventana)Report summarizing design strategies that facilitate disassemble and hypothetical route for disassembling and recycling multi-material products.
Report and PowerPoint file of training materials (se abrirá en una nueva ventana)A report containing training materials with associated PowerPoint files (M30).
Report of exploitation events & EU project collaboration (se abrirá en una nueva ventana)A report that describes the exploitation events and EU project collaboration activities (M36).
Report of Certification, Standardisation and Regulations (se abrirá en una nueva ventana)Report of Certification, Standardisation and Regulations.
Second progress and financial reports (se abrirá en una nueva ventana)D1.2 Progress and financial reports [CTM, M12, M24, M36] – Reports on progress and financial management, as well as communication and dissemination activities and actions. (Linked to T1.2 & T1.3)
Report containing the electrical motor functional test results and a comparison with the design intent of the unit.
Manufactured and evaluated test coupons for 3 multi-material products (se abrirá en una nueva ventana)Physical test coupons in sufficient quantity, report on the evaluation of test results.
Battery package manufacturing and test (se abrirá en una nueva ventana)Report containing the battery functional test results and a comparison with the design intent of the unit.
Publicaciones
Autores:
Julia Ureña, Antonio Medina, Marta Álvarez-Leal, Aybike Yalçınyüz, Conor Kelly, Diarmuid Flatharta
Editor:
FEMS EUROMAT 2025: BOOK OF ABSTRACTS (2025)
Autores:
E. Pei, A. Azeem Islam, M. Alvarez-Leal, J. Ureña, V. Modi, J. Solder, J. Solleiro Rodriguez
Publicado en:
9th European Congress on Computational Methods in Applied Sciences and Engineering, 2025
Editor:
CIMNE
DOI:
10.23967/ECCOMAS.2024.180
Autores:
MARTA ALVAREZ-LEAL, ANA FRAILE-MARTIN, Dr. MANUEL PASTOR-CINTAS, Dr. JULIA UREÑA
Editor:
FEMS EUROMAT 2025: BOOK OF ABSTRACTS (2025)
Autores:
M. Álvarez-Leal, A. Fraile-Martin, M. Pastor-Cintas, J. Ureña
Publicado en:
https://www.fswp2025.pt/docs/FSWP2025_Proceedings.pdf, 2025
Editor:
PROCEEDINGS FSWP 2025
Autores:
A. Azeem Islam, E. Pei, J. Wang, T. Marinopoulos, M. Alvarez-Leal, J. Urena, C. Kelly, D. Flatharta
Publicado en:
V International Conference on Simulation for Additive Manufacturing Sim-AM 2025
Editor:
Scipedia
Autores:
Harshada R. Chothe, Tim Huber, Frédéric Addiego, Christian Kukla, Joamin Gonzalez-Gutierrez
Publicado en:
Progress in Additive Manufacturing, Edición 10, 2025, ISSN 2363-9512
Editor:
Springer Science and Business Media LLC
DOI:
10.1007/S40964-025-01106-4
Autores:
Aybike Yalçınyüz, Julius Raute, Joamin Gonzalez-Gutierrez, Eujin Pei, Max Biegler, Michael Rethmeier
Publicado en:
Progress in Additive Manufacturing, Edición 10, 2025, ISSN 2363-9512
Editor:
Springer Science and Business Media LLC
DOI:
10.1007/S40964-025-01206-1
Autores:
Marta Alvarez-Leal, Manuel Pastor-Cintas, Ana Fraile-Martin, Julia Ureña
Publicado en:
The International Journal of Advanced Manufacturing Technology, 2024, ISSN 0268-3768
Editor:
Springer Science and Business Media LLC
DOI:
10.1007/S00170-024-14314-Z
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles