CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.
Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.
Leistungen
D1.1 Quality Assurance Plan and risk assessment [CTM, M1] - Internal procedures for communication, progress monitoring, quality assurance and risk management. (Linked to T1.1 & T1.2)
Life cycle assessment for 3 multi-material products produced by AM (öffnet in neuem Fenster)Report comparing the LCA of new and traditional manufacturing methods.
First progress and financial reports (öffnet in neuem Fenster)D1.2 Progress and financial reports [CTM, M12, M24, M36] – Reports on progress and financial management, as well as communication and dissemination activities and actions. (Linked to T1.2 & T1.3)
Final progress and financial reports (öffnet in neuem Fenster)D1.2 Progress and financial reports [CTM, M12, M24, M36] – Reports on progress and financial management, as well as communication and dissemination activities and actions. (Linked to T1.2 & T1.3)
Report of Communication, Exploitation & Dissemination Plan (öffnet in neuem Fenster)A report that describes the MULTHEM Communication, Exploitation & Dissemination Plan (M6).
Recommendations for disassembling and recycling of 3 multi-material products produced by AM (öffnet in neuem Fenster)Report summarizing design strategies that facilitate disassemble and hypothetical route for disassembling and recycling multi-material products.
Report and PowerPoint file of training materials (öffnet in neuem Fenster)A report containing training materials with associated PowerPoint files (M30).
Report of exploitation events & EU project collaboration (öffnet in neuem Fenster)A report that describes the exploitation events and EU project collaboration activities (M36).
Report of Certification, Standardisation and Regulations (öffnet in neuem Fenster)Report of Certification, Standardisation and Regulations.
Second progress and financial reports (öffnet in neuem Fenster)D1.2 Progress and financial reports [CTM, M12, M24, M36] – Reports on progress and financial management, as well as communication and dissemination activities and actions. (Linked to T1.2 & T1.3)
Report containing the electrical motor functional test results and a comparison with the design intent of the unit.
Manufactured and evaluated test coupons for 3 multi-material products (öffnet in neuem Fenster)Physical test coupons in sufficient quantity, report on the evaluation of test results.
Battery package manufacturing and test (öffnet in neuem Fenster)Report containing the battery functional test results and a comparison with the design intent of the unit.
Veröffentlichungen
Autoren:
Julia Ureña, Antonio Medina, Marta Álvarez-Leal, Aybike Yalçınyüz, Conor Kelly, Diarmuid Flatharta
Herausgeber:
FEMS EUROMAT 2025: BOOK OF ABSTRACTS (2025)
Autoren:
E. Pei, A. Azeem Islam, M. Alvarez-Leal, J. Ureña, V. Modi, J. Solder, J. Solleiro Rodriguez
Veröffentlicht in:
9th European Congress on Computational Methods in Applied Sciences and Engineering, 2025
Herausgeber:
CIMNE
DOI:
10.23967/ECCOMAS.2024.180
Autoren:
MARTA ALVAREZ-LEAL, ANA FRAILE-MARTIN, Dr. MANUEL PASTOR-CINTAS, Dr. JULIA UREÑA
Herausgeber:
FEMS EUROMAT 2025: BOOK OF ABSTRACTS (2025)
Autoren:
M. Álvarez-Leal, A. Fraile-Martin, M. Pastor-Cintas, J. Ureña
Veröffentlicht in:
https://www.fswp2025.pt/docs/FSWP2025_Proceedings.pdf, 2025
Herausgeber:
PROCEEDINGS FSWP 2025
Autoren:
A. Azeem Islam, E. Pei, J. Wang, T. Marinopoulos, M. Alvarez-Leal, J. Urena, C. Kelly, D. Flatharta
Veröffentlicht in:
V International Conference on Simulation for Additive Manufacturing Sim-AM 2025
Herausgeber:
Scipedia
Autoren:
Harshada R. Chothe, Tim Huber, Frédéric Addiego, Christian Kukla, Joamin Gonzalez-Gutierrez
Veröffentlicht in:
Progress in Additive Manufacturing, Ausgabe 10, 2025, ISSN 2363-9512
Herausgeber:
Springer Science and Business Media LLC
DOI:
10.1007/S40964-025-01106-4
Autoren:
Aybike Yalçınyüz, Julius Raute, Joamin Gonzalez-Gutierrez, Eujin Pei, Max Biegler, Michael Rethmeier
Veröffentlicht in:
Progress in Additive Manufacturing, Ausgabe 10, 2025, ISSN 2363-9512
Herausgeber:
Springer Science and Business Media LLC
DOI:
10.1007/S40964-025-01206-1
Autoren:
Marta Alvarez-Leal, Manuel Pastor-Cintas, Ana Fraile-Martin, Julia Ureña
Veröffentlicht in:
The International Journal of Advanced Manufacturing Technology, 2024, ISSN 0268-3768
Herausgeber:
Springer Science and Business Media LLC
DOI:
10.1007/S00170-024-14314-Z
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor