CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.
I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .
Risultati finali
D1.1 Quality Assurance Plan and risk assessment [CTM, M1] - Internal procedures for communication, progress monitoring, quality assurance and risk management. (Linked to T1.1 & T1.2)
Life cycle assessment for 3 multi-material products produced by AM (si apre in una nuova finestra)Report comparing the LCA of new and traditional manufacturing methods.
First progress and financial reports (si apre in una nuova finestra)D1.2 Progress and financial reports [CTM, M12, M24, M36] – Reports on progress and financial management, as well as communication and dissemination activities and actions. (Linked to T1.2 & T1.3)
Final progress and financial reports (si apre in una nuova finestra)D1.2 Progress and financial reports [CTM, M12, M24, M36] – Reports on progress and financial management, as well as communication and dissemination activities and actions. (Linked to T1.2 & T1.3)
Report of Communication, Exploitation & Dissemination Plan (si apre in una nuova finestra)A report that describes the MULTHEM Communication, Exploitation & Dissemination Plan (M6).
Recommendations for disassembling and recycling of 3 multi-material products produced by AM (si apre in una nuova finestra)Report summarizing design strategies that facilitate disassemble and hypothetical route for disassembling and recycling multi-material products.
Report and PowerPoint file of training materials (si apre in una nuova finestra)A report containing training materials with associated PowerPoint files (M30).
Report of exploitation events & EU project collaboration (si apre in una nuova finestra)A report that describes the exploitation events and EU project collaboration activities (M36).
Report of Certification, Standardisation and Regulations (si apre in una nuova finestra)Report of Certification, Standardisation and Regulations.
Second progress and financial reports (si apre in una nuova finestra)D1.2 Progress and financial reports [CTM, M12, M24, M36] – Reports on progress and financial management, as well as communication and dissemination activities and actions. (Linked to T1.2 & T1.3)
Report containing the electrical motor functional test results and a comparison with the design intent of the unit.
Manufactured and evaluated test coupons for 3 multi-material products (si apre in una nuova finestra)Physical test coupons in sufficient quantity, report on the evaluation of test results.
Battery package manufacturing and test (si apre in una nuova finestra)Report containing the battery functional test results and a comparison with the design intent of the unit.
Pubblicazioni
Autori:
Julia Ureña, Antonio Medina, Marta Álvarez-Leal, Aybike Yalçınyüz, Conor Kelly, Diarmuid Flatharta
Editore:
FEMS EUROMAT 2025: BOOK OF ABSTRACTS (2025)
Autori:
E. Pei, A. Azeem Islam, M. Alvarez-Leal, J. Ureña, V. Modi, J. Solder, J. Solleiro Rodriguez
Pubblicato in:
9th European Congress on Computational Methods in Applied Sciences and Engineering, 2025
Editore:
CIMNE
DOI:
10.23967/ECCOMAS.2024.180
Autori:
MARTA ALVAREZ-LEAL, ANA FRAILE-MARTIN, Dr. MANUEL PASTOR-CINTAS, Dr. JULIA UREÑA
Editore:
FEMS EUROMAT 2025: BOOK OF ABSTRACTS (2025)
Autori:
M. Álvarez-Leal, A. Fraile-Martin, M. Pastor-Cintas, J. Ureña
Pubblicato in:
https://www.fswp2025.pt/docs/FSWP2025_Proceedings.pdf, 2025
Editore:
PROCEEDINGS FSWP 2025
Autori:
A. Azeem Islam, E. Pei, J. Wang, T. Marinopoulos, M. Alvarez-Leal, J. Urena, C. Kelly, D. Flatharta
Pubblicato in:
V International Conference on Simulation for Additive Manufacturing Sim-AM 2025
Editore:
Scipedia
Autori:
Harshada R. Chothe, Tim Huber, Frédéric Addiego, Christian Kukla, Joamin Gonzalez-Gutierrez
Pubblicato in:
Progress in Additive Manufacturing, Numero 10, 2025, ISSN 2363-9512
Editore:
Springer Science and Business Media LLC
DOI:
10.1007/S40964-025-01106-4
Autori:
Aybike Yalçınyüz, Julius Raute, Joamin Gonzalez-Gutierrez, Eujin Pei, Max Biegler, Michael Rethmeier
Pubblicato in:
Progress in Additive Manufacturing, Numero 10, 2025, ISSN 2363-9512
Editore:
Springer Science and Business Media LLC
DOI:
10.1007/S40964-025-01206-1
Autori:
Marta Alvarez-Leal, Manuel Pastor-Cintas, Ana Fraile-Martin, Julia Ureña
Pubblicato in:
The International Journal of Advanced Manufacturing Technology, 2024, ISSN 0268-3768
Editore:
Springer Science and Business Media LLC
DOI:
10.1007/S00170-024-14314-Z
È in corso la ricerca di dati su OpenAIRE...
Si è verificato un errore durante la ricerca dei dati su OpenAIRE
Nessun risultato disponibile