CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
Report on the developed electrodes based on graphene- and MXene-based materials with gravimetric capacitance >200 F/g and volumetric capacitance >150 F/cm3. [T3.2]
Quality control for CRM-free SC materials (se abrirá en una nueva ventana)The report describes the protocols and specifications for quality control assessment and reproducibility assurance of the SC materials. For the quality control of graphene-based SC materials, the ISO TS 21356-1 is followed. The report also describes the specifications and quality control procedures defined to ensure the material uniformity and reproducibility assurance for the case of MXene and ILs. [T1.4]
Quality Assurance Report (se abrirá en una nueva ventana)Report identifying quality indicators of the deliverables, internal reviewers, review criteria for each deliverable, and the approval procedure defined to ensure the quality of all technical deliverables and reports. [T7.3]
Hybrids and functionalized EMs characterization (se abrirá en una nueva ventana)Report on the characterization of hybrid and functionalized EMs, which includes their compositional characterization (XPS), structural/morphological characterizations (AFM, SEM, HRTEM; GIXD), gas physisorption (BET) measurements, spectroscopic characterizations (FTIR, Raman, UV/visible and fluorescence spectroscopy, PES), electrical and other physical characterizations (c-AFM, KPFM, macroscopic Kelvin probe, UPS). [T2.3 and T2.3]
Slurry formulations for high-energy SCs (se abrirá en una nueva ventana)Report on the formulation and processing of EM pastes/slurries. The report describes the efforts carried out to define the best combination of active materials and additives pastes/slurries, guaranteeing the required electrical sheet resistance < 100Ω/□, SSA (> 2000 m2/g) and processability through printing deposition techniques. [T3.1]
Novel CRM-free EMs and IL-based electrolytes for SCs (se abrirá en una nueva ventana)Report on the synthesis and characterization of EMs, based on CRM-free graphene-based materials and MXenes), and sustainable IL-based electrolytes . The report describes the morphological/structural and chemical properties SLG/FLG produced through WJM, HPH and electrochemical exfoliation methods using synthetic graphite and replacing toxic and hazardous exfoliating solvents/electrolytes (e.g., NMP) with environmentally friendly alternatives. The report also describes the characteristics of the curved graphene produced using SiC as the precursor material and exploiting a proprietary fluidized bed reactor technology. The report also contains the results obtained by the systematic study on MXenes by varying the elemental composition of the raw MAX phase, starting from Ti- (SOTA and reference materials) and Mo-based MAX phases, but going beyond as the project progresses (exploring Mn and Zr-based phases). [T1.1 and T1.2]
Updated quality control for CRM-free SC materials (se abrirá en una nueva ventana)Update of D1.1. This document describes the basic information used to define material certification strategies. [T1.4]
Ex-ante environmental and socio-economic impact assessment (se abrirá en una nueva ventana)Report on the ex-ante assessment of the environmental and socio-economic impacts of the materials and technologies developed, based mainly on expert interviews with the GREENCAP consortium partners. [T5.2 and T5.3]
Multiscale characterization of EMs and electrolytes (se abrirá en una nueva ventana)Report on advanced multiscale physicochemical and electrochemical characterization of EMs and electrolytes . It describes their compositional, structural/morphological, and (electro)chemical properties relevant for their subsequent application as SC materials. [T1.2]
Electrochemical characterization of electrode/electrolyte interfaces (se abrirá en una nueva ventana)Report describing the main achievement obtained by the consortium on the electrochemical characterization of electrode/electrolyte interfaces, including advanced in-situ analyses (Raman spectroscopy and TGA measurements). [T2.4]
Industrial chain manufacturing (se abrirá en una nueva ventana)Preliminary report describing the requirements and necessary actions needed to establish the industrial chain manufacturing of the SCs. The report illustrates the integration of the industrial production of both electrode materials (powders and inks/pastes) and IL-based electrolytes over an industrial SC manufacturing line for cylindrical cells. The protocols established for the production and transport of the materials among the partners is described. In addition, the report assesses the costs related to the industrial manufacturing chain, identifying the most convenient processes for its refining. [T4.2]
Upscaling processes and standardization (se abrirá en una nueva ventana)Preliminary report on the upscaling and standardization processes for SC materials. The document describes the implementation adopted to reach industrial production rates both for powder (>103 kg/year for SLG/FLG and ~105 kg/year for curved graphene, and ~1 kg/day for MXene) and inks/pastes (>2×103 kg/year). The report also summarizes the established metrics and path of standardization for the quality control of the developed materials and electrodes. [T4.1]
Updated Upscaling processes and standardization (se abrirá en una nueva ventana)Update of D4.1, describing the upscaling and standardization processes for SC materials. [T4.1]
Risk Management Plan (se abrirá en una nueva ventana)Plan for project quality and risk management. The report describes contingency plans and risk management protocols including an extended and complete risk analysis. [T7.3]
Ex-post environmental and socio-economic impact assessment (se abrirá en una nueva ventana)Report on the ex-post assessment of the environmental and socio-economic impacts of the materials and technologies developed, based on a comprehensive expert interview survey across the GREENCAP production value chain. [T5.2 and 5.3]
Functionalization of SC materials (se abrirá en una nueva ventana)Report on the chemical functionalization strategies pursued for CRM-free graphene-based materials and MXenes. The report contains the outcomes and the optimization paths of both non-covalent and covalent approaches, and the resulting degree of functionalization and methods’ robustness. [T2.1]
Final benchmarking report (se abrirá en una nueva ventana)Report on the benchmarking of the developed SC technology compared in terms of performance and sustainability. A cost calculation is added to the report with a time horizon (5-10 years after the project) [T5.1]
Updated Industrial chain manufacturing (se abrirá en una nueva ventana)Update of D4.2, describing the requirements and necessary actions needed to establish the industrial chain manufacturing of the SCs. [T4.2]
Report on pouch cell demonstrators with an energy density of >20 Wh/kg or >16 Wh/L. The report describes both the manufacturing processes and the electrochemical results, summarizing SC specifications. [T3.3]
Cylindrical prototype cells (se abrirá en una nueva ventana)Preliminary report on the fabrication and testing of 1-2 cylindrical prototype cells with double-sided coated electrodes based on the newly developed SC materials. The initial tests are based on industrial standards and encompass aging by cycling tests, aging by near operational cycling tests and initial calendar life tests. [T4.3]
Updated Cylindrical prototype cells (se abrirá en una nueva ventana)Update of D4.3, describing the fabrication and testing of 1-2 cylindrical prototype cells with double-sided coated electrodes based on the newly developed SC materials. [T4.3]
Project website, logo, project templates, newsletter, and database for dissemination, all designed in line with the content identity, based on the project key messages. [T6.1]
Plan for project quality and risk management. The report describes contingency plans and risk management protocols including an extended and complete risk analysis. [T7.4]
Publicaciones
Autores:
Abelardo Sánchez‐Oliva, Verónica Montes‐García, Ke Li, Kaitlyn Prenger, Xuyun Guo, Iwona Janica, Wojciech Kukułka, Adrián Tamayo, Pilar Prieto, Paolo Samorì, Valeria Nicolosi, Artur Ciesielski
Publicado en:
Small, 2025, ISSN 1613-6810
Editor:
Wiley
DOI:
10.1002/SMLL.202507744
Autores:
Davood Sabaghi; Josef Polčák; Hyejung Yang; Xiaodong Li; Ahiud Morag; Dongqi Li; Ali Shaygan Nia; Saman Khosravi H; Tomáš Šikola; Xinliang Feng; Minghao Yu
Publicado en:
Advanced energy materials 14(3), 2302961 (2023). doi:10.1002/aenm.202302961, 2023, ISSN 1614-6832
Editor:
Wiley-VCH Verlag
DOI:
10.3204/pubdb-2024-00267
Autores:
Dongqi Li, Wenhao Zheng, Mahdi Ghorbani-Asl, Juliane Scheiter, Kamil Sobczak, Silvan Kretschmer, Josef Polčák, Pranjali Hirasing Jadhao, Paweł P. Michałowski, Ruoling Yu, Jiaxu Zhang, Jinxin Liu, Jingwei Du, Quanquan Guo, Ehrenfried Zschech, Tomáš Šikola, Mischa Bonn, Nicolás Pérez, Kornelius Nielsch, Arkady V. Krasheninnikov, Hai I. Wang, Minghao Yu, Xinliang Feng
Publicado en:
Nature Synthesis, 2026, ISSN 2731-0582
Editor:
Springer Science and Business Media LLC
DOI:
10.1038/S44160-025-00970-W
Autores:
Stefano Ippolito, Francesca Urban, Paolo Samorì, Jonathan E. Spanier, Yury Gogotsi
Publicado en:
Advanced Electronic Materials, Edición 11, 13, 2500017, 2025, ISSN 2199-160X
Editor:
Wiley-VCH
DOI:
10.1002/AELM.202500017
Autores:
Indrajit Mahadev Patil, Tobias Burton, Alix Ladam, Sebastien Fantini, Andrea Balducci
Publicado en:
Electrochimica Acta, Edición 525, 2025, ISSN 0013-4686
Editor:
Elsevier BV
DOI:
10.1016/J.ELECTACTA.2025.146133
Autores:
Dr. Alessio D'Alessandro, Dr. Sebastiano Bellani, Agnese Gamberini, Dr. Valentina Mastronardi, Dr. Marilena Isabella Zappia, Matteo Abruzzese, Dr. Sanjay Thorat, Elena Calcagno, Dr. Francesco Bonaccorso
Publicado en:
Batteries and supercaps, 2023, ISSN 2566-6223
Editor:
Wiley
DOI:
10.1002/batt.202300458
Autores:
Matteo Gentile, Sebastiano Bellani*, Marilena I. Zappia, Agnese Gamberini, Valentina Mastronardi, Matteo Abruzzese, Luca Gabatel, Lea Pasquale, Sergio Marras, Ahmad Bagheri, Hossein Beydaghi, Evie L. Papadopoulou, Guglielmo Lanzani, and Francesco Bonaccor
Publicado en:
ACS Appl. Mater. Interfaces, Edición 16, 2024, ISSN 1944-8244
Editor:
American Chemical Society
DOI:
10.1021/acsami.3c18629
Autores:
Zhengmei Song, Luna Boulbet-Friedelmeyer, Marvin Motay, Antonio Esau del Rio Castillo, Housseinou Ba, Rym Soltani, Carlos Drummond, Yannick Lafue, Alain Penicaud, Francesco Bonaccorso, Alberto Bianco
Publicado en:
Carbon, Edición 244, 2025, ISSN 0008-6223
Editor:
Elsevier BV
DOI:
10.1016/J.CARBON.2025.120685
Autores:
Dongqi Li, Wenhao Zheng, Sai Manoj Gali, Kamil Sobczak, Michal Horák, Josef Polčák, Nikolaj Lopatik, Zichao Li, Jiaxu Zhang, Davood Sabaghi, Shengqiang Zhou, Paweł P. Michałowski, Ehrenfried Zschech, Eike Brunner, Mikołaj Donten, Tomáš Šikola, Mischa Bonn
Publicado en:
Nature Materials, Edición 23, 2024, ISSN 1476-1122
Editor:
Nature Publishing Group
DOI:
10.1038/s41563-024-01911-2
Autores:
Cataldo Valentini, Verónica Montes-García, Dawid Pakulski, Paolo Samorì, Artur Ciesielski
Publicado en:
Small, Edición 21, 8, 2410544, 2025, ISSN 1613-6810
Editor:
Wiley-VCH
DOI:
10.1002/SMLL.202410544
Autores:
Francesca Urban, Stefano Ippolito, Jane Frostad, José D. Gouveia, José R. B. Gomes, Paweł P. Michałowski, Steven J. May, Paolo Samorì, Yury Gogotsi
Publicado en:
ACS Applied Electronic Materials, Edición 8, 2026, ISSN 2637-6113
Editor:
American Chemical Society (ACS)
DOI:
10.1021/ACSAELM.5C01847
Autores:
Zhongshi Ju, Yusheng Chen, Peng Li, Jiangang Ma, Haiyang Xu, Yichun Liu, Paolo Samorì
Publicado en:
Advanced Materials, Edición 36, 48, 2412512, 2024, ISSN 0935-9648
Editor:
Wiley-VCH
DOI:
10.1002/ADMA.202412512
Autores:
Sara Gullace, Matteo Abruzzese, Luca Cusin, Gabriele Saleh, Sanjay B. Thorat, Agnese Gamberini, Sebastiano Bellani, Artur Ciesielski, Francesco Bonaccorso, Paolo Samorì
Publicado en:
Journal of Materials Chemistry A, Edición 12, 37, 25359-25370, 2024, ISSN 2050-7496
Editor:
Royal Society of Chemistry
DOI:
10.1039/D4TA03930K
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles