Descripción del proyecto
El aluminio como alternativa al acero
El acero se emplea de forma generalizada en la construcción de edificios, barcos y maquinaria. Sin embargo, muchas industrias están buscando alternativas para reducir el peso de sus productos y abaratar costes. El aluminio es una alternativa ligera, pero es propenso a la corrosión. En este contexto, el equipo del proyecto SURE2COAT, financiado con fondos europeos, favorecerá el uso y la adopción del aluminio en nuevos sectores en los que se emplean productos con formas complejas. Para abordar el problema de la corrosión del aluminio, se desarrollarán nuevos tratamientos superficiales para motores eléctricos, sistemas de calefacción y unidades de almacenamiento de calor. El objetivo de SURE2COAT es aumentar la eficiencia energética en al menos un 50 % y aumentar el uso de aluminio reciclado en un 70 % mediante tratamientos superficiales y tecnologías de producción innovadoras.
Objetivo
Light alloys, like Al, have shown to be good options for replacing steel in many sectors due to higher thermal conductivity and weight reduction they allow, which has become crucial e.g. for e-mobility. However, without protection, recycled Al is prone to corrosion under operation in harsh environments (e.g. heat exchangers in heat storage units, components in motors needed to be frequently cleaned with harmful chemicals). The Sure2Coat project will enable the use and uptake of Al in new sectors involving products with complex shapes, by new sustainable manufacturing methods with lower energy consumption for end users. Corrosion is a major challenge with an annual global cost of $2.5 trillion. It is therefore fundamental to develop and validate new surface treatments to produce corrosion resistant and conductive coatings for new applications. Sure2Coat will develop and validate new surface treatments for light alloys (anaphoretic e-coating, laser structuring, composite-PEO coating) in three use cases in which energy usage is key: Electrical engines, Heating systems and Heat storage units. Sure2Coat pays special attention to effective design for future integration into their respective production lines. Sure2Coat's target is to increase the energy efficiency by 50-60% and increase the use of recycled Al by 70% by using surface treatments and innovative production technologies (casting, virtualisation), with lower energy consumption (from 10%) during manufacturing. For an industrial point of view, a prerequisite for succeeding is continuity in manufacturing R&D&I projects and training/education of required staff, which Sure2Coat will foster by broad dissemination and exploitation of the project results across the manufacturing value chain. Sure2Coat will result in strengthening the European manufacturing value chain by developing European industries with leading-edge technologies on manufacturing materials and allowing for accelerating roll-out for green transition.
Ámbito científico
Palabras clave
Programa(s)
Convocatoria de propuestas
HORIZON-CL4-2022-TWIN-TRANSITION-01
Consulte otros proyectos de esta convocatoriaRégimen de financiación
HORIZON-RIA - HORIZON Research and Innovation ActionsCoordinador
7034 Trondheim
Noruega