Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

PRESSurized HYdrogen prOdUced by high temperature Steam electrolysis

Descripción del proyecto

Electrolizadores de óxido sólido para la producción de hidrógeno presurizado en Europa

Producir y utilizar hidrógeno (H2) verde es fundamental para la descarbonización. El plan RePowerEU pretende duplicar el objetivo de H2 renovable de la Unión Europea hasta 20 millones de toneladas anuales, una cifra que incluye tanto la producción nacional como las importaciones. Alcanzar ese objetivo exigirá un aumento considerable de la capacidad de fabricación de equipos como los electrolizadores. En el proyecto PressHyous, financiado con fondos europeos, se validará un dispositivo presurizado de 20 kW a escala de laboratorio que produce 13,5 kg de hidrógeno al día mediante una pila de electrolizador de óxido sólido. El dispositivo funciona a una presión de hasta 30 bares durante 4 000 horas y con él se pretende producir hidrógeno de cero emisiones a un coste de 3 EUR por kg para 2030. En el proyecto también se examinará un diseño rentable de pila sin vasija de presión, el cual se probará a una presión de 10 bares.

Objetivo

The production and use of clean H2 is a key lever for the decarbonation of industries, as a fuel for transportation and as a storage vector for renewable electricity at large scale. The RePowerEU plan, for saving energy, producing clean energy, and diversifying energy supplies sets out a strategy to double the previous EU renewable H2 target (10 million tons/y of domestic production +10 million tons/y of H2 imports). Meeting these targets requires the EU to significantly upscale its manufacturing capacities for innovative equipment such as electrolysers.
However, using H2 requires given levels of pressure depending on applications. Thus to pave the way to the delivery of down to zero emissions of pressurised H2 at reduced cost (around 3 €/kg by 2030), PressHyous will validate the operation of a 20 kWe pressurised lab-scale device (eq. 13.5 kg H2/d) composing of a solid oxide electrolyser (SOEL) stack placed in a pressurised vessel, up to 30 bar at 1 A/cm2 and 1.3V during 4000h. PressHyous will also investigate a promising pressurised stack concept (without pressure vessel) relieving the cost of Balance of Plant. This will be tested up to 10 bar at short stack scale, at a similar current density to the stack operated in a pressurised vessel. These two stacks will integrate optimised components such as cell and sealing. PressHyous will in parallel deliver model-based insights for H2 production under pressure for up to 5 identified use cases, on expectable performances of both stack concepts (with or without pressurised vessel) towards large scale developments up to 100s MWe, in strong link with techno-economic and life-cycle analysis.
PressHyous consortium gathers a large portfolio of skills from modelling to system manufacturing, and a wide range of partners (RTOs and industrials) all along the value chain. The scientific and technological activities are all intended to strive towards the overall design and validation of future MWe large scale pressurised SOEL.

Ámbito científico (EuroSciVoc)

Palabras clave

Programa(s)

Tema(s)

Régimen de financiación

HORIZON-JU-RIA - HORIZON JU Research and Innovation Actions

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) HORIZON-JTI-CLEANH2-2022-1

Ver todos los proyectos financiados en el marco de esta convocatoria

Coordinador

COMMISSARIAT A L ENERGIE ATOMIQUE ET AUX ENERGIES ALTERNATIVES
Aportación neta de la UEn
€ 599 777,25
Coste total
€ 599 777,25

Participantes (9)

Socios (2)