Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

3D printing fabrication of tailored interfaces for pressurized Protonic Ceramic Electrolysis Cells

Objectif

Pressuriz3D aims to advance in the field of pressurized protonic ceramic electrolysis cells (PCEC) with the utilization of advanced fabrication techniques such as masked-stereolithography (MSLA) and robocasting. Aiming to reduce the utilization of fossil fuels on a global scale, the design of systems for hydrogen production via steam electrolysis is fundamental to increase the reliability of renewable energy sources.
PCECs are high-temperature electrolysers which use ceramic electrolytes characterized by high protonic conductivity. Compared with other HTEs (e.g. solid oxide electrolysis cells, SOEC), this type of conduction mechanism can significantly reduce the operating temperature of the device (e.g. from 700-900 °C to 300-650 °C respectively for SOEC and PCEC). Additionally, PCECs can produce directly pure hydrogen eliminating the purification process to remove steam necessary for SOECs.
Fabrication of a PCEC via additive manufacturing (AM) techniques can significantly reduce production costs and the waste of material during processing, thus boosting sustainability and circularity aspects. complex-shaped electrolyte can be produced increasing the mechanical resistance with the joining materials to maintain the gas tightness of the system (i.e. glass-ceramic sealants). Patterned surfaces coupled with glass ceramic sealants will allow the utilization of pressurized gases, which are expected to significantly increase PCEC performances. Furthermore, geometry modification of the electrolyte membranes, thanks to the fabrication via MSLA printing, can further improve the performance and the hydrogen production rate.
A high impact on the future career of the candidate is expected by complementing his current background with new skills in the field of hydrogen conversion, in particular, the design and processing of PCEC and the integration of glass-ceramic sealants for the fabrication of pressurized systems.

Champ scientifique (EuroSciVoc)

Mots‑clés

Programme(s)

Thème(s)

Régime de financement

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) HORIZON-MSCA-2022-PF-01

Voir tous les projets financés au titre de cet appel

Coordinateur

POLITECNICO DI TORINO
Contribution nette de l'UE
€ 172 750,08
Adresse
CORSO DUCA DEGLI ABRUZZI 24
10129 Torino
Italie
Région
Nord-Ovest Piemonte Torino
Type d’activité
Higher or Secondary Education Establishments
Liens
Coût total
Aucune donnée