Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

Novel Magnesium alloy for bone tissue engineering manufactured by selective laser melting

Descripción del proyecto

Aleaciones de magnesio para fracturas óseas

Las fracturas óseas constituyen un problema sanitario importante debido al envejecimiento de la población. Los tratamientos actuales suelen emplear materiales permanentes como el titanio, que puede provocar osteoporosis y requerir una operación para retirarlo. Los implantes biodegradables temporales, como los de magnesio (Mg), son prometedores, pero se corroen con demasiada rapidez y su aprobación es limitada debido a las dificultades para controlar la porosidad: un factor clave para el crecimiento tisular. En el proyecto MACS, que cuenta con el apoyo de las acciones Marie Skłodowska-Curie, se desarrollarán aleaciones de Mg para crear matrices porosas mediante sinterización selectiva por láser. Estas matrices se optimizarán en cuanto a resistencia a la corrosión y biocompatibilidad, a fin de favorecer la ingeniería de tejidos óseos. Además, en el proyecto se diseñarán revestimientos superficiales que controlen los índices de corrosión y favorezcan la proliferación celular.

Objetivo

One important health issue in Europe, especially with the aging of the population, is bone (tissue) fracture (damage) as a result of high-energy impact or trauma, tumor resection, infection or osteo-degenerative diseases. This problem is currently managed with fixation devices and porous scaffolds made of bio-inert and biocompatible alloys (Ti, Co-Cr, steels). However, the large elastic modulus mismatch between these permanent materials and the bone tissue leads to osteoporosis and secondary fractures. Moreover, secondary surgeries are often necessary to remove these permanent implants. To overcome these limitations, temporary implants from biodegradable and biocompatible metals, such as magnesium (Mg) have been attracted a lot of attention. However, Mg suffers from fast corrosion rates in body fluids, which also impairs cell proliferation and just a few Mg alloys, fabricated by conventional techniques (extrusion and powder metallurgy) have been approved for bone tissue therapies so far. These techniques do not allow to control the porosity (pore shape, size and connectivity), which is necessary to ensure appropriate cell proliferation and tissue growth. Hence, the project MACS aims at developing a new generation of Mg alloys suitable to manufacture by selective laser melting porous scaffolds with optimum porosity, mechanical properties, corrosion resistance and biocompatibility to be used for bone tissue engineering. Particular emphasis will be paid to the engineering of surface coatings to ensure the appropriate rates of corrosion and cell proliferation so the biodegradable scaffold will be gradually replaced by the tissue. Porous scaffolds will be designed and manufactured by selective laser melting with the new alloy and engineered with surface coatings. The mechanical properties, corrosion resistance as well as bioactivity for bone tissue regeneration will be determined by means of in vitro tests.

Ámbito científico (EuroSciVoc)

Palabras clave

Programa(s)

Tema(s)

Régimen de financiación

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) HORIZON-MSCA-2022-PF-01

Ver todos los proyectos financiados en el marco de esta convocatoria

Coordinador

FUNDACION IMDEA MATERIALES
Aportación neta de la UEn
€ 165 312,96
Dirección
CALLE ERIC KANDEL 2 PARQUE CIENTIFICO Y TECNOLOGICO TECNOGETAFE
28906 Getafe
España
Región
Comunidad de Madrid Comunidad de Madrid Madrid
Tipo de actividad
Research Organisations
Enlaces
Coste total
Sin datos

Socios (1)