Descripción del proyecto
Mejorar los métodos de reciclaje de plástico
El Pacto Verde Europeo ha fijado el objetivo de reciclar el 55 % de los residuos de envases de plástico de aquí a 2030. En la actualidad, solo se recicla un tercio de los mismos. Uno de los retos que afronta el reciclaje de plástico es que suele dar lugar a productos secundarios de baja calidad, debido a la cristalización que se produce durante el enfriamiento del plástico. Además, la mayoría de los residuos plásticos contienen aditivos, lo que dificulta la determinación del gradiente de temperatura adecuado para evitar la cristalización. El proyecto CPW, financiado por las acciones Marie Skłodowska-Curie, tiene por objeto investigar el proceso de cristalización utilizando la termografía, que permite recabar el perfil de temperatura de los residuos plásticos durante la impresión 3D. En CPW se empleará un programa matemático para analiza este perfil y determinar la temperatura exacta de formación de los cristales, que podrá regularse durante la impresión 3D.
Objetivo
Nowadays, the issue of plastic recycling has become one of the major issues of environmental protection and waste management. Since 1950, humans have produced more than 8 billion tons of plastic, of which more than half was discarded into landfills and only 9% was recycled. The majority of plastic waste stemmed from semi-crystalline polymers such PE, PP and PET. When recycled, the properties of these polymers deteriorated due to shrinkage and warpage issues related to the crystallisation process that occurred during the cooling process. The temperature gradient during cooling is able to control the crystallisation growth. However, determining the crystallization process of plastic waste during processing is difficult as generally plastic waste contains additives. Therefore, CPW uses IR thermal imaging technique as it can capture the temperature profile of plastic waste during 3D printing to study the temperature-crystallisation relationship. The existing techniques, such as hot-stage microscopy, X-ray synchrotron and in-situ light scattering, have several restrictions. Among them are non-simultaneous processes, expensive, and requiring high energy radiation sources. Furthermore, these techniques can only be applied to virgin plastic and are limited to transparent polymers that are free from additives and contamination. The captured temperature profile will be analysed using MATLAB to examine the crystallite structure at precise temperature, thus could control their properties through the processing temperature of the 3D printer. An innovative approach through experimental setup and technique used to investigate the crystallisation process will be the novelty of CPW. This research will contribute to at least four research papers with two ISI journals and two conference papers, and a patent application. The implementation of the MSCA will benefit and impact the recycling of plastic wastes in the world, and this is in line with EU’s strategy for the SDG 12 and SDG13.
Ámbito científico
- engineering and technologyenvironmental engineeringwaste managementwaste treatment processesrecycling
- natural sciencesearth and related environmental sciencesgeologymineralogycrystallography
- natural scienceschemical sciencespolymer sciences
- natural sciencesphysical sciencesopticsmicroscopy
- engineering and technologymechanical engineeringmanufacturing engineeringadditive manufacturing
Palabras clave
Programa(s)
- HORIZON.1.2 - Marie Skłodowska-Curie Actions (MSCA) Main Programme
Régimen de financiación
HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European FellowshipsCoordinador
2080 MSIDA
Malta