Projektbeschreibung
Recyclingmethoden für Kunststoffe verbessern
Im Europäischen Grünen Deal ist das Ziel für 2030 verankert, dass 55 % Verpackungsabfälle aus Kunststoff recycelt werden. Derzeit liegt dieser Wert bei etwa einem Drittel. Eine der Herausforderungen beim Kunststoffrecycling besteht darin, dass beim Abkühlen eine Kristallisation auftritt, die zu minderwertigen Sekundärprodukten führt. Außerdem enthalten die meisten Kunststoffabfälle Zusatzstoffe, sodass es schwierig ist, den richtigen Temperaturgradienten zu bestimmen, um eine Kristallisation zu vermeiden. Finanziert über die Marie-Skłodowska-Curie-Maßnahmen wird im Projekt CPW der Kristallisationsprozess mittels Infrarot-Wärmebildgebung geprüft, um das Temperaturprofil von Kunststoffabfällen beim 3D-Druck zu ermitteln. Mit einer mathematischen Software wird dieses Profil analysiert, um die genaue Temperatur der Kristallitbildung zu bestimmen, die dann während des 3D-Drucks reguliert werden kann.
Ziel
Nowadays, the issue of plastic recycling has become one of the major issues of environmental protection and waste management. Since 1950, humans have produced more than 8 billion tons of plastic, of which more than half was discarded into landfills and only 9% was recycled. The majority of plastic waste stemmed from semi-crystalline polymers such PE, PP and PET. When recycled, the properties of these polymers deteriorated due to shrinkage and warpage issues related to the crystallisation process that occurred during the cooling process. The temperature gradient during cooling is able to control the crystallisation growth. However, determining the crystallization process of plastic waste during processing is difficult as generally plastic waste contains additives. Therefore, CPW uses IR thermal imaging technique as it can capture the temperature profile of plastic waste during 3D printing to study the temperature-crystallisation relationship. The existing techniques, such as hot-stage microscopy, X-ray synchrotron and in-situ light scattering, have several restrictions. Among them are non-simultaneous processes, expensive, and requiring high energy radiation sources. Furthermore, these techniques can only be applied to virgin plastic and are limited to transparent polymers that are free from additives and contamination. The captured temperature profile will be analysed using MATLAB to examine the crystallite structure at precise temperature, thus could control their properties through the processing temperature of the 3D printer. An innovative approach through experimental setup and technique used to investigate the crystallisation process will be the novelty of CPW. This research will contribute to at least four research papers with two ISI journals and two conference papers, and a patent application. The implementation of the MSCA will benefit and impact the recycling of plastic wastes in the world, and this is in line with EU’s strategy for the SDG 12 and SDG13.
Wissenschaftliches Gebiet
- engineering and technologyenvironmental engineeringwaste managementwaste treatment processesrecycling
- natural sciencesearth and related environmental sciencesgeologymineralogycrystallography
- natural scienceschemical sciencespolymer sciences
- natural sciencesphysical sciencesopticsmicroscopy
- engineering and technologymechanical engineeringmanufacturing engineeringadditive manufacturing
Schlüsselbegriffe
Programm/Programme
- HORIZON.1.2 - Marie Skłodowska-Curie Actions (MSCA) Main Programme
Aufforderung zur Vorschlagseinreichung
Andere Projekte für diesen Aufruf anzeigenFinanzierungsplan
HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European FellowshipsKoordinator
2080 MSIDA
Malta