Descrizione del progetto
Migliorare i metodi di riciclaggio della plastica
Il Green Deal dell’UE ha fissato l’obiettivo di riciclare il 55 % dei rifiuti di imballaggio in plastica entro il 2030. Attualmente, solo un terzo circa viene riciclato. Una delle sfide del riciclaggio della plastica è che di solito si ottengono prodotti secondari di bassa qualità a causa della cristallizzazione che si verifica durante il raffreddamento. Inoltre, la maggior parte dei rifiuti plastici contiene additivi, il che rende difficile determinare il corretto gradiente di temperatura per evitare la cristallizzazione. Finanziato dal programma di azioni Marie Skłodowska-Curie, il progetto CPW mira a studiare il processo di cristallizzazione utilizzando immagini termiche a infrarossi per catturare il profilo di temperatura dei rifiuti plastici durante la stampa 3D. Utilizzando un software matematico, CPW analizzerà questo profilo per individuare la temperatura precisa di formazione di cristallite, che potrà poi essere regolata durante la stampa 3D.
Obiettivo
Nowadays, the issue of plastic recycling has become one of the major issues of environmental protection and waste management. Since 1950, humans have produced more than 8 billion tons of plastic, of which more than half was discarded into landfills and only 9% was recycled. The majority of plastic waste stemmed from semi-crystalline polymers such PE, PP and PET. When recycled, the properties of these polymers deteriorated due to shrinkage and warpage issues related to the crystallisation process that occurred during the cooling process. The temperature gradient during cooling is able to control the crystallisation growth. However, determining the crystallization process of plastic waste during processing is difficult as generally plastic waste contains additives. Therefore, CPW uses IR thermal imaging technique as it can capture the temperature profile of plastic waste during 3D printing to study the temperature-crystallisation relationship. The existing techniques, such as hot-stage microscopy, X-ray synchrotron and in-situ light scattering, have several restrictions. Among them are non-simultaneous processes, expensive, and requiring high energy radiation sources. Furthermore, these techniques can only be applied to virgin plastic and are limited to transparent polymers that are free from additives and contamination. The captured temperature profile will be analysed using MATLAB to examine the crystallite structure at precise temperature, thus could control their properties through the processing temperature of the 3D printer. An innovative approach through experimental setup and technique used to investigate the crystallisation process will be the novelty of CPW. This research will contribute to at least four research papers with two ISI journals and two conference papers, and a patent application. The implementation of the MSCA will benefit and impact the recycling of plastic wastes in the world, and this is in line with EU’s strategy for the SDG 12 and SDG13.
Campo scientifico
- engineering and technologyenvironmental engineeringwaste managementwaste treatment processesrecycling
- natural sciencesearth and related environmental sciencesgeologymineralogycrystallography
- natural scienceschemical sciencespolymer sciences
- natural sciencesphysical sciencesopticsmicroscopy
- engineering and technologymechanical engineeringmanufacturing engineeringadditive manufacturing
Parole chiave
Programma(i)
- HORIZON.1.2 - Marie Skłodowska-Curie Actions (MSCA) Main Programme
Meccanismo di finanziamento
HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European FellowshipsCoordinatore
2080 MSIDA
Malta