Sustainable station-keeping systems for floating wind

Informazioni relative al progetto

TAILWIND

ID dell’accordo di sovvenzione: 101136195

DOI

10.3030/101136195

Data della firma CE 20 Novembre 2023

Data di avvio 1 Gennaio 2024

Data di completamento 31 Dicembre 2027

Finanziato da

• Climate, Energy and Mobility

Costo totale

€ 5 586 730,71

Contributo UE

€ 5 586 730,71

Coordinato da

NORGES GEOTEKNISKE INSTITUTT AS
Norway

Periodic Reporting for period 1 - TAILWIND (Sustainable station-keeping systems for floating wind)

Periodo di rendicontazione: 2024-01-01 al 2025-04-30

Sintesi del contesto e degli obiettivi generali del progetto

To meet EU net zero targets requires a six times increase in offshore wind deployment rate, primarily in deep seas where floating offshore wind (FOW) is needed. To achieve this growth requires FOW to be economic, sustainable and supported by a wide supply chain.
TAILWIND is focussed on station-keeping systems of FOW, which comprise mooring lines and anchoring systems. The project will unlock identified opportunities for cost reduction, reduced environmental impact and material use, and also supply chain diversification.
TAILWIND will integrate new experimental evidence, novel technologies and innovative methodologies, across mooring lines and anchors, and will quantify the resulting benefits for the overall floating system design. All innovations will be sustainable-by-design, integrating environmental, societal and economic benefits.
For mooring lines, new synthetic rope technologies will be mechanically and chemically tested to demonstrate their suitability for small-footprint ‘taut’ moorings, validating new response models. For anchoring, geotechnical centrifuge testing and advanced soil element testing will underpin two advances: (i) new response models for the long-term loading particular to FOW, and (ii) the validation of novel anchors types including cluster anchors that are “silently” installed from small vessels and are suited to shared moorings.
The new technologies for mooring lines and anchors will allow smaller and lighter station-keeping systems, manufactured and installed by a wider supply chain. TAILWIND will distill the models into system optimisation tools, unlocking further floater optimisation and cost reduction. Finally, an integrated life cycle assessment will quantify the economic, social and environmental impact of TAILWIND’s technologies.
TAILWIND unites a diverse consortium of 12 organisations from 8 European countries, located across the emerging FOW development regions, and spanning academia, consulting, construction and manufacturing.

Lavoro eseguito dall’inizio del progetto fino alla fine del periodo coperto dalla relazione e principali risultati finora ottenuti

TAILWIND started with the WP1 partners defining the scenarios and running the coupled simulations that provide a solid basis for both anchors and mooring lines testing. WP2 has done an excellent job at defining relevant testing scenarios and ensuring they are compatible with time and material availability. They then started testing fibre ropes in the beginning of 2025. The WP3 partners have articulated the sustainable-by-design concept and targeted anchoring systems to be advanced. WP4 has started with some preliminary optimisation work and has gained full swing in the first months of 2025. WP5 and WP1 have delivered their first selection of sustainability indicators while have started working on the floating offshore wind impact on local supply chains. The indispensable support of our exploitation, communication and dissemination experts in WP6 underpinned all these activities.

Progressi oltre lo stato dell’arte e potenziale impatto previsto (incluso l’impatto socioeconomico e le implicazioni sociali più ampie del progetto fino ad ora)

Result 1:
Deliverable 1.1 is related to the scenarios definition, including location, floater and mooring configurations, as well as the estimation of loads expected for mooring lines and anchors in selected scenarios.
These loads in mooring lines and anchors are required for the research activity being developed in other project activities, WP2 ‘Mooring line technology’ working on the mechanical characterisation of fibre ropes used in the mooring lines, and WP3 ‘Anchor technology’ working on anchors and soil behaviour for anchoring design.
Maximum loads have been estimated for two different sites, three floater concepts and several mooring configurations for a set of load cases, mainly maximum thrust and extreme environmental conditions. For each configuration the floater and mooring design used correspond to a preliminary design based on basic requirements given and will undergo optimisation in a later phase of TAILWIND project. Yet loads estimation at this stage provide useful inputs for already running WP2/WP3 activities.

Result 2:
The ambitious goal of the project is to introduce novel frameworks in line with the sustainable-by-design principle, which involves integrating economic, societal, and environmental considerations into design methods and technology selection processes. Deliverable 3.1 marks the first steps in the project, focusing on the identification of anchoring technologies for future development based on reference station-keeping systems. The anchoring system analysis comprises two key stages: Technical Reliability and Industrial Feasibility. In the Technical Reliability stage, the loads from the platform analyses are used to size state-of-the-art anchor types, including suction piles, driven piles, drag anchors, plate anchors, and gravity anchors. Industrial Feasibility involves the assessment of material sustainability, fabrication and transportation capacities, installation efficiency, decommissioning, and recyclability. The study results in the identification of promising anchor technologies for further development via experimental testing and numerical modelling within the TAILWIND project. The outcome amplifies the potential to unlock efficiencies and increase geotechnical reliability of infrastructure design.

Result 3:
Deliverable 1.2 and 5.1 cover technical, financial, social, and environmental KPIs, by providing a shortlist of such KPIs to be considered for sustainability impact assessment for the development of Floating Offshore Wind (FOW) renewable energy infrastructure.

Project overview