A novel Renewable Energy Storage System tailored for Offshore Applications

Informazioni relative al progetto

FLASC HPES

ID dell’accordo di sovvenzione: 101161553

DOI

10.3030/101161553

Data della firma CE 30 Luglio 2024

Data di avvio 1 Gennaio 2025

Data di completamento 31 Dicembre 2026

Finanziato da

• The European Innovation Council (EIC)

Costo totale

€ 3 571 416,25

Contributo UE

€ 2 499 991,38

Coordinato da

FLASC BV
Netherlands

Periodic Reporting for period 1 - FLASC HPES (A novel Renewable Energy Storage System tailored for Offshore Applications)

Periodo di rendicontazione: 2025-01-01 al 2025-12-31

Sintesi del contesto e degli obiettivi generali del progetto

Europe’s energy transition relies increasingly on large offshore renewable projects, yet the variability of wind and solar power creates growing challenges for grid stability, curtailment, and the efficient use of existing transmission capacity. Today, no commercially available long-duration energy storage solution is optimised for deployment in offshore environments, especially in the shallow to mid-depth waters where most new wind farms are being developed. This results in higher system costs, lost clean-energy output, and slower progress toward climate targets.

The project addresses this gap by developing and qualifying an innovative hydro-pneumatic energy storage system that can be co-located with offshore renewable generation. The solution stores energy by using pressurised seawater and compressed air and leverages the ocean as a natural thermal buffer, enabling high efficiency, scalability, and the use of widely available, non-critical materials. The main objective is to deliver a fully qualified system ready for integration into future commercial projects.

By combining advanced engineering, robust thermodynamic modelling, and a structured pathway to industrialisation, the project aims to reduce the cost and complexity of integrating offshore renewables into the energy system. The expected impact is significant: improving utilisation of offshore wind assets, reducing grid congestion, and enabling a more resilient, affordable and sustainable European energy infrastructure.

Lavoro eseguito dall’inizio del progetto fino alla fine del periodo coperto dalla relazione e principali risultati finora ottenuti

Since the start of the project, substantial progress has been made across system design, modelling, and the preparation for system qualification. The engineering team completed several rounds of modelling and design refinement. A suitable site was identified and secured for the physical building and testing of the pilot plant. Permits and compliance aspects are already in place. Suppliers are working on key components for delivery in Q1 2026.

In parallel, the control strategy has advanced from preliminary concepts to a detailed architecture. Core algorithms for energy management, safety procedures, and dynamic operational response have been developed and tested in simulation environments. The associated software framework, including data acquisition, supervisory control, and interfaces for future integration with offshore wind assets, has been defined and partially implemented.

Work has also progressed on the industrialisation pathway, including supply-chain mapping, component standardisation, and preparatory studies for the qualification testing campaign. Engagement with environmental experts and regulatory stakeholders has confirmed the feasibility of deploying the technology in line with existing offshore project practices.

Overall, the project remains on schedule and on budget, and the technical foundations are now in place for the full testing and measurement campaign planned for 2026.

Progressi oltre lo stato dell’arte e potenziale impatto previsto (incluso l’impatto socioeconomico e le implicazioni sociali più ampie del progetto fino ad ora)

The project has already generated several advances beyond the state of the art in offshore energy storage. The thermodynamic modelling has validated performance assumptions for a system that can achieve high storage efficiency in shallow to mid-depth waters, an environment previously inaccessible to other offshore storage concepts. The refined pre-charge and thermal-management strategies represent an improvement over existing compressed-air or pumped-hydro systems.

The development of an implementable control strategy tailored to offshore applications, capable of fast dynamic response and compatibility with grid-service markets, further differentiates the technology from current land-based storage solutions. The software and digital-modelling tools created to support the design have also enabled early integration studies with prospective clients and wind-farm developers.

Engagement with these clients has highlighted a strong commercial pull, indicating that the solution could reduce system-level costs, increase renewable-energy utilisation, and support new offshore applications such as hydrogen production or island decarbonisation. For full market uptake, the next steps include this system-level qualification, continued engagement with regulators and certification bodies, and securing access to scale-up manufacturing and project finance.

Preparation activities at the Plant One site

Preparation activities at Hycom’s site (one of the suppliers)

Preparation activities at Hycom’s site (one of the suppliers)

Preparation activities at the Plant One site

Preparation activities at the Plant One site

Wiring of an electrical cabinet

Preparation activities at Hycom’s site (one of the suppliers)

Preparation activities at the Plant One site