Adaptive Digital Systems for Sustainable Construction and Material Management in the Circular Economy

Informazioni relative al progetto

ADAPT4CE

ID dell’accordo di sovvenzione: 101182768

DOI

10.3030/101182768

Data della firma CE 2 Settembre 2024

Data di avvio 1 Gennaio 2025

Data di completamento 31 Dicembre 2028

Finanziato da

• Marie Skłodowska-Curie Actions (MSCA)

Costo totale

Nessun dato

Contributo UE

€ 1 656 000,00

Coordinato da

ETHNIKO KAI KAPODISTRIAKO PANEPISTIMIO ATHINON
Greece

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (2)

Data Management Plan

Data Management Plan.

Plan for dissemination and exploitation including communication activities

Plan for dissemination and exploitation including communication activities.

Pubblicazioni

Other (18)

Dual-Objective B.E.S.O.: Explicit Integration of Annual Daylight Autonomy into Structural Topology Optimization.

Autori: Gonidakis, Dimitrios N.; Lagaros, Nikos
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE903, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.19236286

Experimental Investigation of Bending Behavior in FDM-Printed ASA Beams

Autori: Dimitras, Konstantinos; Kostopoulos, Grigorios; Georgantzinos, Stelios
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE650, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18270849

Smart Mapping and Decision Tools for Localized Material Reuse in Circular Construction

Autori: Papadopoulou, Eleni; Georgantzinos, Stelios
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE393, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18271053

On the Sustainability, Life Cycle Assessment, and Artificial Intelligence Integrations in Construction and Built-Environment

Autori: Alhassan, Mohammad A.; Amaireh, Layla K.; Betoush, Nour A.
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE532, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18420979

6D Printing: Exploiting Full Programmability of Smart Structures through Additive Manufacturing

Autori: Georgantzinos, Stelios
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18156919

Tolerance Analysis and Assembly Performance Enhancement in 3D Printed Mechanical Components

Autori: Dimitrakopoulos, George; Kostopoulos, Grigorios; Georgantzinos, Stelios
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE551, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18421600

Topology Optimization for Daylight Analysis (T.O.DAY): A Constructability Driven Methodology for Additively Manufactured Façades.

Autori: Gonidakis, Dimitrios N.; Lagaros, Nikos
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE878, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.19236509

Characterization and Anisotropy of 3D Printed Mycelium

Autori: Karagiannis, Minas; Lagaros, Nikos
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE1114, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.19235982

Shape Recovery Behavior of PETG Structures in 4D Printing

Autori: Kostopoulos, Grigorios; Pothitos, Aristidis; Georgantzinos, Stelios
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE388, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18270777

Improved Dimensional Accuracy in 3D Printed Components of PLA Using Taguchi Design of Experiments

Autori: Dimitrakopoulos, George; Kostopoulos, Grigorios; Georgantzinos, Stelios
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE549, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18421664

NLFEA Study on the Flexural Behavior of Double Skin Tubular Beams Strengthened with LRS FRP System: Inner Steel Tube Eccentricity Effect

Autori: Alnemrawi, Bara'a R.; Al-Rousan, Rajai Z.; Nusier, Osama K.; Lagaros, Nikos; Georgantzinos, Stelios
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE1125, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18419815

Plan2FEM: Can Large Multimodal Models Turn Plans into Finite-Element Graphs?

Autori: Papapostolou, Christos A.; Lagaros, Nikos
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE840, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.19236470

Digital Twin for Fused Filament Fabrication (FFF)

Autori: Georgantzinos, Stelios; Papadopoulou, Eleni
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE394, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18270595

Neural Network Constitutive Modeling of Soil for Resilient and Sustainable Design

Autori: Voulgaris, Stefanos; Lagaros, Nikos
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE1034, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.19236385

Optimizing the Strengthening Efficiency of Double Skin Tubular Beams using Sustainable Hybrid LRS FRP System

Autori: Alnemrawi, Bara'a R.; Al-Rousan, Rajai Z.; Nusier, Osama K.; Lagaros, Nikos; Georgantzinos, Stelios
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE1124, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18418222

4D Printing of complex ABS Structures

Autori: Kostopoulos, Grigorios; Dimitras, Konstantinos; Georgantzinos, Stelios
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE387, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18271353

The Extent Effect of Concrete Material on the Flexural Performance of Solid and Hollow Double Skin Tubular Beam

Autori: Alnemrawi, Bara'a R.; Al-Rousan, Rajai Z.; Nusier, Osama K.; Lagaros, Nikos; Georgantzinos, Stelios
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE1126, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18417487

Influence of 3D Printing Parameters on the Tensile Performance of ASA Specimens

Autori: Konstantinos, Dimitras; Kostopoulos, Grigorios; Georgantzinos, Stelios
Pubblicato in: International Conferences on Digital Technology Driven Engineering 2025 (ICDTDE2025), Numero ICDTDE651, 2026
Editore: Zenodo
DOI: 10.5281/ZENODO.18270941

Peer reviewed articles (3)

Statistically grounded selection and validation of surrogate models for civil-engineering decision support: ANN, Kriging and SVM across three case studies

Autori: Spyros Chandrinos, Stefanos Voulgaris, Chara Ch. Mitropoulou, Maria Gkara, Stelios K. Georgantzinos, Nikos D. Lagaros
Pubblicato in: Machine Learning for Computational Science and Engineering, Numero 2, 2026, ISSN 3005-1428
Editore: Springer Science and Business Media LLC
DOI: 10.1007/S44379-026-00075-X

Resilient Modular Shelter for a Changing Climate

Autori: Dimitrios Gonidakis, Evangelia Frangedaki, Stefanos Voulgaris, Stavros Chatzielefteriou, Georgios Kazakis, Nikolaos Lagaros
Pubblicato in: Technical Annals, Numero 1, 2025, ISSN 2945-0330
Editore: National Documentation Centre (EKT)
DOI: 10.12681/TA.43664

A unified multiscale framework for stress-Based topology optimization using local constraint enforcement

Autori: George Kazakis, Nikos D. Lagaros
Pubblicato in: Computer Methods in Applied Mechanics and Engineering, Numero 452, 2026, ISSN 0045-7825
Editore: Elsevier BV
DOI: 10.1016/J.CMA.2025.118692