Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS

Novel ultrafast fiber microlaser for applications in Microwave Photonics and Communication Networks

Descrizione del progetto

Fotonica a microonde con laser a fibra ultraveloce

Nel mondo della fotonica a microonde, le sorgenti attuali devono far fronte a limitazioni quali le fluttuazioni spettrali e la bassa tenuta in potenza. Sostenuto dal programma di azioni Marie Skłodowska-Curie, il progetto MicroLight si prefigge di superare queste sfide sviluppando un innovativo microlaser a fibra ultraveloce. Combinando la fibra a polarità periodica drogata con erbio, questo nuovo dispositivo genera impulsi stabili ad alta potenza e pettini di frequenza, offrendo una sorgente ideale per la fotonica a microonde: la sua progettazione compatta sfrutta le non linearità del secondo e terzo ordine per garantire una generazione efficiente del segnale, in grado di operare a frequenze nella gamma delle microonde (1-300 GHz). Con particolare attenzione alla miniaturizzazione e all’ottimizzazione, il progetto promette di rivoluzionare le reti di comunicazione fornendo sorgenti a bassa perdita, regolabili e ad alte prestazioni che superano le tecnologie esistenti.

Obiettivo

The presented proposal concerns the theoretical investigation, experimental realization, characterization and optimization of a novel compact ultrafast fiber microlaser (EDPPF-m) for Microwave Photonics (MWP) applications. The EDPPF-m is a nonlinear Fabry-Perot (F-P) resonator based on a novel technological platform consisting in an erbium doped periodically poled fiber (EDPPF) which combines in a single device the second and third order nonlinearities of a periodically poled fiber with the optical gain of an erbium doped fiber to generate very stable and high-power active cavity soliton pulses (and their related frequency combs). The EDPPF-m will be used as a MWP source, capable to generate electronic signals with repetition rates typical of microwaves (1 - 300 GHz) through a technique called remote heterodyning detection (RHD). The EDPPF-m will allow to overcome the drawbacks of existing MWP sources, such as fluctuations of spectral linewidth and intensity (mode-locked lasers) or low nonlinear conversion efficiency and low power handling capacity (microresonators) and will embody the ideal characteristics of a MWP source (low optical loss, tunable high repetition rate, low phase noise, high power handling capacity, high nonlinear conversion efficiency, ease of coupling with optical fibers). The proposal is divided into three work packages (WPs). The first two WPs are dedicated to the fabrication and miniaturization to the centimeter scale of the fiber microlaser proposed in two different configurations, one based on a commercial erbium doped fiber (EDF) (where only the third order nonlinearity is exploited) and the other one based on the EDPPF (where both the second and third order nonlinearities are used to generate solitons). The third WP describes the experimental procedure (RHD) adopted to implement the MWP source for applications in Communication Networks starting from the two versions of the fiber microlaser presented in the first two WPs.

Campo scientifico (EuroSciVoc)

Programma(i)

Argomento(i)

Meccanismo di finanziamento

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Vedi tutti i progetti finanziati nell’ambito di questo schema di finanziamento

Invito a presentare proposte

(si apre in una nuova finestra) HORIZON-MSCA-2024-PF-01

Vedi tutti i progetti finanziati nell’ambito del bando

Coordinatore

CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE CNRS
Contributo netto dell'UE
€ 226 420,56
Indirizzo
RUE MICHEL ANGE 3
75794 Paris
Francia
Regione
Ile-de-France Ile-de-France Paris
Tipo di attività
Research Organisations
Collegamenti
Costo totale
Nessun dato

Partner (1)