Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

Development of full-range energy band matching photo-recharged Zn metal batteries

Descripción del proyecto

Baterías metálicas de zinc fotorecargadas para sistemas de energía limpia

La adopción de soluciones de energía renovable está aumentando en diversos sectores, impulsada por la búsqueda de prácticas más ecológicas. El cambio ha estimulado las innovaciones en las tecnologías renovables, mejorando su sostenibilidad. Las investigaciones más recientes se centran en las pilas de zinc-metal fotorecargadas (PRZMB) con correspondencia de bandas de energía de rango completo (FEBM), que convierten la energía solar en energía electroquímica en un solo paso. El método elimina las sustancias nocivas presentes en las células solares tradicionales y reduce los costes relacionados con las redes eléctricas a gran escala. Con el apoyo de las acciones Marie Skłodowska-Curie, el proyecto PRZMBs desarrollará materiales, métodos y técnicas basados en pilas acuosas de zinc metal de bajo coste y respetuosas con el medio ambiente para crear y optimizar las PRZMB de alto rendimiento, potencia y densidad.

Objetivo

The full-range energy band matching (FEBM) photo-recharged Zn metal batteries (PRZMBs) that can convert solar energy into electrochemical energy in one step are considered a totally clean energy system, which can not only avoid the usage of harmful substances (Cr, Pb, etc.) in solar cells and reduce the usage of fossil fuels but also reduce the cost of large-scale power grids. In this proposal, based on low-cost, environmentally friendly aqueous zinc metal batteries, a modified MoS2 material (m-MoS2) will be employed as a photocathode by O substitution for partial S to increase the layer spacing and improve the electrochemical activity of m-MoS2 (WP1). The electrochemical reaction process and kinetics will be studied by the precise control of the structure, morphologies, and O contents in m-MoS2 to realize the aim of a capacity improvement of 100 mAh g-1 at 100 mA g-1 compared with original MoS2. Subsequently, a precursor solid method will be employed to synthesize the m-MoS2/fCNTs composites with a covalent bonding interface, which can avoid structural collapse during the cycling process and effectively improve the reversibility, and finally to realize the goal of operation time over 1000 hours (WP1). Based on the tunability of layered MoS2, the relations between layers, O contents of m-MoS2, and energy band structure will be studied to provide the foundation for the FEBM process. Finally, based on the results from WP1-2, the energy band changes of m-MoS2 during cycling will be studied to screen out the proper energy band range of m-MoS2 to construct a FEBM photoelectrode. In addition, the relationship between the photogenerated charge and the electrochemical reaction mechanism (reaction kinetics, intercalation/phase conversion, and capacitive behavior) will be investigated to finally realize a high-performance PRZMB with high power/energy densities by increasing the photoelectric conversion efficiency and photo-charging rate over 10% and 30 mA g-1.

Ámbito científico (EuroSciVoc)

Palabras clave

Programa(s)

Tema(s)

Régimen de financiación

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) HORIZON-MSCA-2024-PF-01

Ver todos los proyectos financiados en el marco de esta convocatoria

Coordinador

UNIVERSITY COLLEGE LONDON
Aportación neta de la UEn
€ 276 187,92
Dirección
GOWER STREET
WC1E 6BT London
Reino Unido
Región
London Inner London — West Camden and City of London
Tipo de actividad
Higher or Secondary Education Establishments
Enlaces
Coste total
Sin datos