Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS

Development of full-range energy band matching photo-recharged Zn metal batteries

Descrizione del progetto

Batterie in metallo di zinco ricaricate attraverso l’energia solare per sistemi energetici puliti

L’adozione di soluzioni di energia rinnovabile sta registrando un’ascesa in vari settori, trainata da pratiche più ecologiche: questo cambiamento ha stimolato diverse innovazioni nelle tecnologie rinnovabili, migliorandone la sostenibilità. La ricerca recente si concentra sulle batterie in metallo di zinco ricaricate attraverso l’energia solare (PRZMB, photo-recharged zinc metal battery) con allineamento dell’intera gamma della banda energetica (FEBM, full-range energy band matching), che consentono di convertire l’energia solare in energia elettrochimica in un unico passaggio. Questo approccio elimina le sostanze nocive presenti nelle celle solari tradizionali e riduce i costi legati alle reti elettriche su larga scala. Sostenuto dal programma di azioni Marie Skłodowska-Curie, il progetto PRZMBs svilupperà materiali, metodi e tecniche basati su batterie acquose in metallo di zinco a basso costo ed ecocompatibili al fine di creare e ottimizzare PRZMB ad alte prestazioni, elevata potenza e alta densità.

Obiettivo

The full-range energy band matching (FEBM) photo-recharged Zn metal batteries (PRZMBs) that can convert solar energy into electrochemical energy in one step are considered a totally clean energy system, which can not only avoid the usage of harmful substances (Cr, Pb, etc.) in solar cells and reduce the usage of fossil fuels but also reduce the cost of large-scale power grids. In this proposal, based on low-cost, environmentally friendly aqueous zinc metal batteries, a modified MoS2 material (m-MoS2) will be employed as a photocathode by O substitution for partial S to increase the layer spacing and improve the electrochemical activity of m-MoS2 (WP1). The electrochemical reaction process and kinetics will be studied by the precise control of the structure, morphologies, and O contents in m-MoS2 to realize the aim of a capacity improvement of 100 mAh g-1 at 100 mA g-1 compared with original MoS2. Subsequently, a precursor solid method will be employed to synthesize the m-MoS2/fCNTs composites with a covalent bonding interface, which can avoid structural collapse during the cycling process and effectively improve the reversibility, and finally to realize the goal of operation time over 1000 hours (WP1). Based on the tunability of layered MoS2, the relations between layers, O contents of m-MoS2, and energy band structure will be studied to provide the foundation for the FEBM process. Finally, based on the results from WP1-2, the energy band changes of m-MoS2 during cycling will be studied to screen out the proper energy band range of m-MoS2 to construct a FEBM photoelectrode. In addition, the relationship between the photogenerated charge and the electrochemical reaction mechanism (reaction kinetics, intercalation/phase conversion, and capacitive behavior) will be investigated to finally realize a high-performance PRZMB with high power/energy densities by increasing the photoelectric conversion efficiency and photo-charging rate over 10% and 30 mA g-1.

Campo scientifico (EuroSciVoc)

Parole chiave

Programma(i)

Argomento(i)

Meccanismo di finanziamento

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Vedi tutti i progetti finanziati nell’ambito di questo schema di finanziamento

Invito a presentare proposte

(si apre in una nuova finestra) HORIZON-MSCA-2024-PF-01

Vedi tutti i progetti finanziati nell’ambito del bando

Coordinatore

UNIVERSITY COLLEGE LONDON
Contributo netto dell'UE
€ 276 187,92
Indirizzo
GOWER STREET
WC1E 6BT London
Regno Unito
Regione
London Inner London — West Camden and City of London
Tipo di attività
Higher or Secondary Education Establishments
Collegamenti
Costo totale
Nessun dato