Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS

Development of full-range energy band matching photo-recharged Zn metal batteries

Projektbeschreibung

Photo-aufgeladene Zn-Metall-Batterien für saubere Energiesysteme

In zahlreichen Sektoren werden zunehmend Lösungen mit erneuerbarer Energie eingeführt, um den Betrieb umweltfreundlicher zu gestalten. Dieser Wandel hat zu Innovationen im Bereich der erneuerbaren Technologien geführt, sodass die Nachhaltigkeit gestiegen ist. Bei jüngsten Forschungsarbeiten geht es um photo-aufgeladene Zink-Metall-Batterien (PRZMB) mit Abstimmung der gesamten Energiebandbreite (FEBM), die Sonnenenergie in einem einzigen Schritt in elektrochemische Energie umwandeln. Dabei sind keine schädlichen Stoffe notwendig, die in traditionellen Solarzellen enthalten sind, und die Kosten für große Stromnetze sinken. Unterstützt über die Marie-Skłodowska-Curie-Maßnahmen werden im Projekt PRZMBs Werkstoffe, Methoden und Verfahren auf der Grundlage kostengünstiger, umweltfreundlicher aquatischer Zink-Metall-Batterien entwickelt, um leistungsstarke PRZMB mit hoher Dichte zu schaffen und zu optimieren.

Ziel

The full-range energy band matching (FEBM) photo-recharged Zn metal batteries (PRZMBs) that can convert solar energy into electrochemical energy in one step are considered a totally clean energy system, which can not only avoid the usage of harmful substances (Cr, Pb, etc.) in solar cells and reduce the usage of fossil fuels but also reduce the cost of large-scale power grids. In this proposal, based on low-cost, environmentally friendly aqueous zinc metal batteries, a modified MoS2 material (m-MoS2) will be employed as a photocathode by O substitution for partial S to increase the layer spacing and improve the electrochemical activity of m-MoS2 (WP1). The electrochemical reaction process and kinetics will be studied by the precise control of the structure, morphologies, and O contents in m-MoS2 to realize the aim of a capacity improvement of 100 mAh g-1 at 100 mA g-1 compared with original MoS2. Subsequently, a precursor solid method will be employed to synthesize the m-MoS2/fCNTs composites with a covalent bonding interface, which can avoid structural collapse during the cycling process and effectively improve the reversibility, and finally to realize the goal of operation time over 1000 hours (WP1). Based on the tunability of layered MoS2, the relations between layers, O contents of m-MoS2, and energy band structure will be studied to provide the foundation for the FEBM process. Finally, based on the results from WP1-2, the energy band changes of m-MoS2 during cycling will be studied to screen out the proper energy band range of m-MoS2 to construct a FEBM photoelectrode. In addition, the relationship between the photogenerated charge and the electrochemical reaction mechanism (reaction kinetics, intercalation/phase conversion, and capacitive behavior) will be investigated to finally realize a high-performance PRZMB with high power/energy densities by increasing the photoelectric conversion efficiency and photo-charging rate over 10% and 30 mA g-1.

Wissenschaftliches Gebiet (EuroSciVoc)

Schlüsselbegriffe

Programm/Programme

Thema/Themen

Finanzierungsplan

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Alle im Rahmen dieses Finanzierungsinstruments finanzierten Projekte anzeigen

Aufforderung zur Vorschlagseinreichung

(öffnet in neuem Fenster) HORIZON-MSCA-2024-PF-01

Alle im Rahmen dieser Aufforderung zur Einreichung von Vorschlägen finanzierten Projekte anzeigen

Koordinator

UNIVERSITY COLLEGE LONDON
Netto-EU-Beitrag
€ 276 187,92
Adresse
GOWER STREET
WC1E 6BT London
Vereinigtes Königreich
Region
London Inner London — West Camden and City of London
Aktivitätstyp
Higher or Secondary Education Establishments
Links
Gesamtkosten
Keine Daten